Canon printer Color imageCLASS MF8080Cw User Manual

3-11
Copying
Copying by Saving Paper
Press	[]	(Paper	Save	Copy)	to	save	paper	when	
making	a	copy.
Choose	one	of	the	following	four	com\finations	of	2	on	1/4	on	
1	and	2-Sided	copy	settings,	as	shown	in	the	ta\fle	\felow.
N	on	1 2-Sided
Select	
Layout	 Format	
Settings	
Original	
Orientation	Original	 Format
2	 on	 1	1->2-Sided
(MF8380	only)
1->2-Sided PortraitBook	Type
4	 on	 1	1->2-Sided
(MF8380	only)
1->2-Sided PortraitBook	Type
2	 on	 1	1->1-Sided
OFF
4	 on	 1	1->1-Sided
OFF
 IMPORT\bNT
Precautions...

3-12
Copying
Registering and Using Co\fbination of Copy Settings (Mode Me\fory)
You	can	register	up	to	four	com\finations	of	frequently	used	
copy	settings	to	the	“Mode	memory”	in	advance.
 IMPORT\bNT
Registered settings of Mode Me\fory
• Registered settings in the\I Mode Memory are saved even during 
\bower OFF.
•  When settings whic\Ih require o\btional \broducts are registered 
in a Mode Memory, the memory becomes unavailable if that 
o\btional \broduct is removed, but its settings \Iremain saved.
•...

3-13
Copying
2 Select  using [] or [] \fnd 
press [OK].
	 		
Copy: Press Start
 100%     LTR
 Erase Frame: Off
 Sharpness:  0
 Mode Memory: Off11
+
-
3 Select  using [] or [] \fnd 
press [OK].
	 		
Mode Memory
 Register/Delete
 Mode 1
 Mode 2
 Mode 3
4  Select \f Mode Memory to delete using [] or [] 
\fnd press [OK].
	 		
Register/Delete
 Mode 1
 Mode 2
 Mode 3
 Mode 4
5 Select  using [] or [] \fnd press [OK].
	 		
Mode 1
 
 
 No. of Copies: 1
 Density:  0
+
-
6 Select  using [] \fnd press [OK]....

3-14
Copying
The	default	settings	are	a	set	of	standard	settings	
predetermined	\fy	the	machine.	These	settings	\fecome	
effective	when	the	machine	is	turned	OFF	and	ON,	or	when		
[
]	(Reset)	is	pressed	to	revert	to	the	default	settings.	 You	
can	change	the	following	default	settings	\fased	on	your	
needs.
Menu
OK
Keys to be used for this operation
1  Press [] (Menu).
2 Select  using [] or [] \fnd 
press [OK].
	 		
Menu
 Preferences
 Timer Settings
 Common Settings
 Copy Settings
3 Select  usi\Fng [] or...

4-1
Ch\fpter
4
Printing fro\f a Co\fputer
This	category	descri\fes	how	to	print	from	computers.
*	If	you	are	a	Macintosh	user,	see	the	following.
•	To	view	how	to	install	the	Printer	Driver		
→	Starter	Guide	or	Mac	\bFRII	Printer	Driver	Installation	Guide
•	 To	view	how	to	use	each	function		
→	Printer	Driver’s	Help
To	view	how	to	display	Mac	\bFRII	Printer	Driver	Installation	Guide	or	Help	in	the	Printer	Driver,	see	 “For	
Macintosh	\bsers” 	(→P.11-5).
Prep\fring to Print from Your Computer  4-2...

4-2
Printing	from	a	Computer
To	print	your	documents	files	from	your	computer,	perform	the	following	steps.
Step 1Choose	\fetween	\bSB	and	network	connections.		Starter	Guide	→	4	Connecting	to	a	Computer	and	
Installing	the	Drivers
Step 2Install	the	printer	driver.
 NOTE
To change the port nu\fber of the \fachine
See the following section.
  e-Manual → Security → Restricting network connections → Setting Protocol Port Numbers
Change \brinter settings on your com\buter when changing the \bort number of...

4-3
Printing	from	a	Computer
Scaling Docu\fents
You	can	enlarge	or	reduce	documents	to	match	the	output	
paper	size.
There	are	two	methods	for	scaling	a	document:	select	the	
output	size	of	the	document	to	scale	it	automatically,	or	
specify	the	scaling	value	manually.
1 Click [P\fge Setup].
	 		
 NOTE
For instructions on how to dis\blay the \brinter driver screen, see 
“Printing” or “Configuring the Default Print Settings” in the e-Manual.
2 Select p\fper size of the document you cre\fted in 
the...

4-4
Printing	from	a	Computer
2 Select [N on 1] from [P\fge L\fyout] (where “N” is 
the number of p\fges\F you w\fnt to print on the 
sheet).
	 		
 NOTE
If you cannot select the o\btions for [Page Layout], dis\blay the 
[Device Settings] sheet, an\Id then select [Auto] or [Enabled] from 
[S\booling at Host].\I For instructions on how to dis\blay the [Device 
Settings] sheet, se\Ie “Setting the Printer O\btions” in the e-Manual.
3 Select the p\fge order from [P\fge Order]. 
	 		
The out\but image is...

4-5
Printing	from	a	Computer
3 Select the binding edge\F from [Binding Loc\ftion].
	 		
The out\but image is d\Iis\blayed in the \breview area.
4 Click [OK].
 NOTE
The dis\blay may differ according to the o\berating sys\Item, as well as 
the ty\be and version of the \brinter driver.
Checking and Canceling Print Jobs
You	can	check	detailed	information	a\fout	print	jo\fs	or	cancel	
print	jo\fs	in	the	middle	of	currently	printing	or	waiting.
 NOTE
If the Processing/Data Indicator on the operation panel...

4-6
Printing	from	a	Computer
 
● For canceling
(1)	 Select		using	[
]	or	[]	and	press	[OK].
	 		
Details
 
 Job Number: 0020
 Status: Printing
 Time: 01/01 09:42AM
(2)	 Select		using	[]	or	[]	and	press	[OK].
	 The	print	jo\f	is	canceled.
	 		
Cancel?
No
Yes
(3)	 Press	[]	(Status	Monitor/Cancel)	to	close	the	screen.
 NOTE
Pressing [] (Stop) can also delete the print jobs
You can delete the \brint job also by \bressing [] (Sto\b).
*  Press [
] (Sto\b) twice to cancel the job wh\Ien the machine 
holds one...