Canon Pixma Mx700 Quick Start Guide

17
Before Using the Machine
4Specify the page size settings according to the loaded paper.
Notez When performing copy direct printing without using a computer, select the size of the loaded 
paper using the Operation Panel.
For details on settings, see “Setting Items” on page 22 or “Setting Items” on page 30.
z When using the machine connected to a computer, select the size of the loaded paper in  Page 
Size  (or Paper Size ) in the printer driver. For details on printer driver settings, see “Printing...

18Before Using the Machine
„Loading Envelopes
Envelopes must be fed from the Rear Tray. Use either European DL or US Comm. Env. #10-sized 
envelope.
1Prepare the envelopes.
zPress down on all four corners and edges of the envelopes to flatten them.
zIf the envelopes are curled, hold the opposite corners and gently twist them in the opposite 
direction.
zIf the flap of an envelope is curled, flatten it.
zIf the leading edge of an envelope is puffed up or curled, use a pen to press the envelope 
flat and...

19
Before Using the Machine
2Load the envelopes.
(1) Retract the Paper Support.
(2) Load the envelope against the Cover Guide 
(the right side of the Paper Support).
Load with the address side facing UP and the 
rear flaps DOWN on the left.
Up to 10 envelopes can be loaded at once.
(3) Slide the Paper Guide against the left side of the envelope.
(4) Press the  Feed Switch  button so that the  Rear Tray lamp (C) lights up.
3Specify the settings in  the printer driver.
(1)Select  Envelope  in Media Type ....

20Before Using the Machine
„Loading Small-Sized Paper
You can use 4 x 6 / 101.6 x 152.4 mm, 5 x 7 / 127.0 x 177.8 mm, and Credit card-sized papers in 
the Rear Tray.
1Load the paper.
(1) Load the paper against the Cover Guide (the 
right side of the Paper Support) with the print 
side facing UP.
(2) Slide the Paper Guide against the left side of 
the paper stack.
(3) Press the  Feed Switch  button so that the  Rear 
Tr a y  lamp (A) lights.
2Specify the page size and media type settings according to the...

21
Copying
Copying
Making Copies
This section describes the ba sic procedure to make copies.
1Turn on the machine.
See “Turning the Machine On and Off” on page 4.
2Press the COPY button.
3Load paper.
See “Loading Printing Paper” on page 10.
4Load the original on the Platen Glass (A) or 
the ADF.
See “Loading Original Documents” on page 6.
5Specify the copy settings.
(1)Press the  { or  } button or the Numeric buttons to 
specify the number of  copies (max. 99 copies).
(2) Press the  [ or  ] button to...

22Copying
Setting Items
Press the Settings button in the copy mode to go the Copy settings screen.
Ta b  1
You can specify the copy settings such as the page size, media type, or print quality.
(1) Page size
Select the page size of the loaded paper.
(2) Media type
Select the media type of the loaded paper.
(3) Print quality
Adjust print quality according to the original.
(4) Magnification
Specify the reduction/enlargement method. For details, refer to “Reducing or Enlarging a 
Copy” in “Setting Items” in...

23 Copying
Ta b  2
You can specify whether to enable automatic intensity adjustment.
(5) Auto intensity
Specify whether the intensity is adjusted automatically.
When Auto intensity ON is selected, Auto will be displayed above the intensity slide bar 
in the Copy standby screen.
Important
You can change the intensity by pressing the [ or ] button even when Auto intensity ON is 
selected. To enable auto intensity again, move the cursor to the center of the slide bar.
NotezAutomatic intensity adjustment is...

24Copying
Using Useful Copy Functions
For details, refer to “Using Useful Copy Functions” in the User’s Guide on-screen manual.
Reducing or Enlarging a Copy
Copying on Stickers 
(Sticker Copy)Copying without Borders 
(Borderless Copy)
Repeating an Image on a Page 
(Image Repeat)
Copying Thick Originals Such as Books 
(Frame Erase)
Platen Glass 16 stickersCopying Two Pages to Fit 
onto a Single Page 
(2-on-1 Copy)
Copying Four Pages to Fit 
onto a Single Page 
(4-on-1 Copy)
Making Multiple Copies
of an...

25 Printing from a Memory Card
Printing from a Memory Card
Memory Cards Supported by This Machine
The following memory cards are compatible with this machine. 
*1 Use the special adapter provided with the card.*2 Requires purchase of a separate compact flash card adapter for xD-Picture card.
Memory cards that can be directly inserted into the Card Slot:
zSD Secure Digital memory card
zSDHC memory card
zMultiMediaCard
zCompact Flash (CF) Card
Supports Type I/II (3.3 V)
zMicrodrive
zMemory Stick
zMemory...

26Printing from a Memory Card
Printable Image Data
This machine supports JPEG and TIFF images created by DCF ver. 1.0/2.0 standard compliant 
digital cameras (Exif ver. 2.2/2.21 compliant).
Important
Compatible image types are limited to JPEG and TIFF only. Other image or movie types such as RAW 
images cannot be printed.