Canon Pixma Mp980 Quick Start Guide

							
  
1
B
15
Setup the Machine and the Computer
USB ConnectionMacintosh
Next, read "22 Loading Paper" on page 58!
On the Canon IJ Network Tool screen, select USB connection, then click 
OK.
 
						

							
0
231
D
16
On the Canon IJ Network Tool 
screen, select LAN connection, 
then click OK.
Set the machine's LAN setting to Wired LAN active beforehand. For details, refer to “7 Machine's LAN Setting” on page 14.
•If no printer is detected, click OK. Make sure of the following, then click Update.
The machine is connected to the computer with a USB cable.The machine is turned on.
•
––
If the Setup Preparations 
dialog box appears, confirm 
that preparation is complete, 
then click OK.
Select Setup in the pop-up menu, select MP980 series in Printers, then click 
OK.
First-time Setup for Use over Wired LAN
Setup the Machine and the Computer
To set up a machine that is not yet connected to a LAN, connect to it by USB.
 
						

							
  
USBUSB
(A)4
D
5
Connect the machine to the network device with a LAN cable (A), then click Yes.When the Setup Completion dialog box appears, remove 
the USB cable, then click OK.
The Printer Setup Utility and Canon IJ Network Scanner Selector 
will start up.
Next, read "19 Add the Machine" on page 47!
Macintosh
If the Set Printer IP Address dialog box appear, refer to "5.6 The Set Printer IP Address dialog box is displayed during setup" in the printed manual: Network Setup Troubleshooting.•
Mac OS X v.10.5.x
Mac OS X v.10.4.x/v.10.3.9
Go to Step .
Go to Step .
 
						

							

231
F
17
First-time Setup for Use over Wireless LAN
Setup the Machine and the Computer
Set the machine's LAN setting to Wireless LAN active beforehand. For details, refer to “7 Machine's LAN Setting” on page 14.
•If no machine is detected, refer to "4.1 The machine is not detected" in the printed manual: Network Setup Troubleshooting. Make sure there is no problem, then click Update.
•
If the Setup Preparations 
dialog box appears, confirm that 
preparation is complete, then 
click OK.
On the Canon IJ Network Tool 
screen, select LAN connection, then 
click OK.
Select Setup in the pop-up menu, select MP980 series in Printers, then 
click OK.
 
						

							
  
4
F
D e t e c t  A c c e s s   P o i n t
Macintosh
To connect to the access point with WEP or WPA displayed in the Encryption column, enter the network key (WEP key or WPA key) in Network Password, then click Connect. For details on network keys, refer to "3.1 About Network Key (Windows)/Network Password (Macintosh)" in the pri\
nted manual: Network 
Setup Troubleshooting.
•
If you want to select an access point manually, or if the target access point is not displayed in the list, or if an e\
rror message appears, refer to “5 The following screen is displayed during setup” in the printed manual: Network Setup Troubleshooting.•
When the Access Points screen appears, select an access point to use, then click Connect.
When an access point is detected automatically, the Access Points screen does not appear. Go to step .
 
						

							

USB
(A)
67
F
17
5
Press the ON button (A) TO TURN 
OFF THE MACHINE, then place the 
machine in the location where you 
will use it, and turn on it.
D e t e c t   t h e   M a c h i n e
If no connection is established even after Connect is clicked, refer to "5.6 The Set Printer IP Address dialog box is displayed during setup" in the printed manual: Network Setup Troubleshooting.
•
If the machine is detected automatically, 
the Set Printer IP Address screen does 
not appear. Go to step .
When the Set Printer IP Address 
screen appears, confirm the contents, 
then click Connect.
When the Setup Completion dialog box appears, remove the 
USB cable, then click Next.
 
						

							
  
9
F
8
Macintosh
If any symbol other than  is displayed, refer to displayed comments and Help for improving the status of communication link.
To check whether the new location is better, click Remeasurement. Measurement of the communication status is performed again.
When any message on Overall network performance appears in the measurement results, rearrange the printer and other network devices following the instructions on the screen.
•
•
•
Confirm the measurement results, then click 
Finish.
Ensure that  is displayed in Connection 
performance between the printer and the access 
point.
The Printer Setup Utility and Canon IJ Network 
Scanner Selector will start up.
Measuring takes a few minutes. Measuring can be cancelled by clicking Cancel. You also examine the detailed status of the communication link after setup by using the Canon IJ Network Tool.
•
On the Connection Performance 
Measurement dialog box, click 
Next.
Measuring of the communication status 
starts, and the results are displayed.
Next, read "19 Add the Machine" on page 47!
Mac OS X v.10.5.x
Mac OS X v.10.4.x/v.10.3.9
Go to Step .
Go to Step .
 
						

							

1234
K
H
18
Macintosh
If the Setup Preparations 
dialog box appears, confirm that 
preparation is complete, then 
click OK.
When the Cancel Setup screen 
appears, then click Cancel.
When the You have no printers available. screen appears, click Cancel.
•
Connect the Wired LAN / Wireless LAN
Setup the Machine and the Computer
On the Canon IJ Network Tool 
screen, select LAN connection, 
then click OK.
Select Setup in the pop-up 
menu, then click Register 
Printer.The Printer Setup Utility and Canon IJ 
Network Scanner Selector will start up.
Next, read "19 Add the Machine" on page 47!
Mac OS X v.10.5.x
Mac OS X v.10.4.x/v.10.3.9
Go to Step .
Go to Step .
 
						

							
  
12
H
K
D
F
19
Mac OS X v.10.5.x/v.10.4.x
Wait for a while, then select Canon MP980 
series and click Add.
Add the Machine
Setup the Machine and the Computer
Macintosh
In Mac OS X v.10.4.x, click More Printers in the 
Printer Browser screen.
The alphanumeric string after Canon MP980 series is the machine's MAC address.
If the machine has not been detected, make sure of the following.
•
•
When the Printer List screen appears, 
click Add.
Mac OS X v.10.4.x/v.10.3.9
Mac OS X v.10.4.x
Mac OS X v.10.3.9
Go to Step .
Go to Step .Mac OS X v.10.5.x
Mac OS X v.10.4.x
Go to Step .
Go to Step .
The machine is turned on.The firewall function of any security soft-ware is turned off.Wired LAN Connection: The machine is connected to the network device with the LAN cable.Wireless LAN Connection: The computer is connected to the access point.The machine is not set to use access control (MAC address filtering).
––
–
–
–
 
						

							

34
K
H
F
D
19
Select Canon IJ Network in the pop-up menu, select your machine’s name in the list 
of printers, then click Add.
The alphanumeric string after Canon MP980 series is the machine's MAC address.
If the machine has not been detected, make sure of the following.
•
•
Confirm that your MP980 series is added to the list of 
printers.
Mac OS X v.10.4.x/v.10.3.9Mac OS X v.10.4.x/v.10.3.9
The machine is turned on.The firewall function of any security software is turned off.Wired LAN Connection: The machine is connected to the network device with the LAN cable.Wireless LAN Connection: The computer is connected to the access point.The machine is not set to use access control (MAC address filtering).
–––
––