Canon Pixma Mp980 Quick Start Guide
Here you can view all the pages of manual Canon Pixma Mp980 Quick Start Guide. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 1
Make sure to read this manual before using the machine. Please keep it in hand for future reference. MP980 Getting Started =Read Me First= series Photo All-In-One
Page 2
S y m b o l s■ The following symbols are used to mark important instructions. Observe these instructions. Instructions that, if ignored, could result in personal injury or material damage. Instructions that must be observed for safe operation. Additional explanations. Descriptions for operations that take some time to complete. Model Number: K10327(MP980) Microsoft is a registered trademark of Microsoft Corporation. Windows is a trademark or registered trademark of Microsoft Corporation \ in the U.S....
Page 3
Contents Unlock the Scanning Unit (Cover) Align the Print Head After Installing the Machine Loading Paper Setup the Machine and the Computer Confirming the Setup Flow Install the Ink Tanks Install the Print Head Turn the Power On
Page 4
(B) (C) (A) 1 1 1 3 2 Unlock the Scanning Unit (Cover) F i r s t , c h e c k t h e i n c l u d e d i t e m s Manuals Setup CD-ROM (containing the drivers, applications and on-screen manuals) Warranty MP-101 paper (for Automatic Print Head Alignment) • • • • Close the Document Cover (B). Open the Document Cover (B). Move the Scanner Lock Switch (C) towards the release mark to unlock the Scanning Unit (Cover). Before turning on the machine, remove all the orange tapes and the protective...
Page 5
(1) (2) (A) (B) (C) (D) 2 231 Turn the Power On Do NOT connect the USB cable at this stage.• Plug in the power cord on the left side at the back of the machine and connect the other end to the wall outlet. Open the Operation Panel (A), then press the ON button (B) to turn on the machine. Make sure that the Document Cover (C) is closed. If an unintended language is displayed on the LCD, press the Back button on the Operation Panel to return to the Language selection screen. • • Use the { or }...
Page 6
(E) (A) (B) (C) (D) 3 12 Install the Print Head Raise the Print Head Lock Lever (E).Open the Paper Output Tray (A), then lift the Scanning Unit (Cover) (B) until it locks into place. The Scanning Unit (Cover) (B) is fixed automatically. The Print Head Holder (C) comes out. (This is where you install the Print Head.) For your safety, always grip as illustrated. Close the Document Cover (D) and lift it with the Scanning Unit (Cover). • •Firmly raise the Print Head Lock Lever until it stops. (The...
Page 7
(E) 543 Remove the Print Head from the silver package. Remove and discard the orange protective cap. Tilt the Print Head and set it in place. Lower the Print Head Lock Lever (E) completely. There may be some transparent or light blue ink on the inside of the bag\ the Print Head comes in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on yourself when handling these items. Be care\ ful not to stain your hands. • Do not knock the Print Head...
Page 8
(1) (2) (A) 4 12 Install the Ink Tanks Do not hold the sides of the ink tank; ink may splash.• Pull the orange tape (1) in the direction of the arrow to peel off the protective film and remove the film (2) completely. If the Print Head Holder moves to the right, close and reopen the Scanning Unit (Cover). Be sure to use the supplied ink tanks. • • Do not handle the ink tanks roughly such as applying them excessive pressure or dropping them. • While pressing down with your left thumb, twist off...
Page 9
(B) 453 Install all the other ink tanks in the same way. Install all the ink tanks. Close the Scanning Unit (Cover) (B). Wait until the screen above appears (about 6 minutes) and go to the next step. The machine may make some operating noises when preparing to print. This is normal operation. • • Once you have installed the ink tanks, do not remove them unnecessarily.• Make sure all the Ink lamp lights red.• For your safety, always grip as illustrated.• If an error message is displayed on the...
Page 10
(C)(C) (A) (B) 5 21 Align the Print Head Align the Print Head for better print results. This takes about 7 minutes. Use a sheet of supplied speciality paper (MP-101) for alignment. Make sure that the Output Tray Extension (B) is extended.• Open the Paper Support (A) and pull it out.Move the Paper Guides (C) to both edges.