Canon Pixma Mp980 Quick Start Guide

  
3
G
I
J
Windows
Some programs that switch the network environment depending on your environment will enable a firewall by default. Check the settings of any such software.•
When the Printers screen appears, make sure that the machine is selected and click Next.
When the machine is not detected, make sure of the following, click Update.•
The machine is turned on.When using wireless LAN : The computer is connected to the access point.When using wired LAN : The machine is connected to the...

0
5
G
I
J
12
4
Windows
Windows XP/2000
When the Network Setup of the Card Slot dialog box appears, specify the drive 
letter, then click Next.
If the error message appears, refer to "5 The following screen is displayed during setup" in the printed manual: Network Setup Troubleshooting.•To change the port name, click View Setup Results, then click Set Port Name. For details, refer to "8 Changing the port name" in the printed manual: Network Setup Troubleshooting.
•
When the Setup...

  
(A)
21
A
C
G
E
I
J
13
Information
Setup the Machine and the Computer
Windows
When the Load plain paper into the cassette screen appears, load plain 
paper in the Cassette (A) and click Next.
For details, refer to "22 Loading Paper" on page 58.•
Click Next.
It may take a while for the next screen to appear. Click Next 
only once.
 


Serial Number* * * * * * * Serial Number* * * * * * * 
34
C
A
E
G
I
J
13
Click Next.
If connected to the Internet, the user registration page appears. Follow the on-screen instructions to 
register your product. You will need your product serial number, which is located on the inside of the 
machine.
To register later, click Cancel. User Registration can be started from the Solution Menu icon. For details, refer to "Solution Menu" on page 62.•
Internet connection is required....

  
5
A
C
G
E
I
J
Windows
Click Exit.
If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then 
click Restart.
After restarting the computer, remove the Setup CD-ROM and keep it in a safe place.
Next, read "22 Loading Paper" 
on page 58!
 


USB
231
K
H
F
D
B
14
The USB port is located on the right side at the back of the 
machine.
When using WPS (Wi-Fi Protected Setup) or connecting an additional computer, make sure that the machine is turned on, 
then go to step . It is not necessary to connect the machine to the computer with a USB cable.
•
•
Setup the Machine and the Computer
Install the Software
Turn on the computer, then 
insert the Setup CD-ROM into 
the CD-ROM drive.
Connect one end of the USB cable to the computer and...

  
54
B
H
K
D
F
Macintosh
Enter your administrator name and password. Click OK.
If you do not know your administrator name or password, click 
Help, then follow the on-screen instructions.
Click Easy Install.
The drivers, application software, and on-screen manuals are installed 
automatically.
If you want to select particular items to install, click Custom Install and follow the on-screen instructions to proceed with the installation.•
 


(A)
8
K
H
F
D
B
14
76
Read the License Agreement 
screen carefully and click Yes.
Installation starts.
Follow any on-screen instructions to install the software.•
When the Load plain paper into the cassette screen appears, 
load plain paper in the Cassette (A) and click Next.
For details, refer to "22 Loading Paper" on page 58.•
Move the cursor over items to display 
explanations.
Click Install.
 

  
Serial Number* * * * * * * Serial Number* * * * * * * 
10
B
H
K
D
F
9
Macintosh
Click Next.Click Next.
If connected to the Internet, the user registration page appears.
Follow the on-screen instructions to register your product.
You will need your product serial number, which is located on the inside of the machine.
Internet connection is required. (Connection fees apply.)•
To register later, click Cancel. User Registration can be started from the Solution Menu icon. For deta\
ils, refer to...


K
H
F
D
B
14
11
When the computer restarts, Canon IJ Network Tool starts automatically.
Go to either of the following 
procedures according to your 
connection method!
Macintosh
USB
Wired LAN
(P.46)
Wireless LAN
WPS
Additional 
Computer
(P.39)
(P.40)
(P.42)
(P.46)
1 5
1 6
1 7
1 8
1 8
B
D
F
K
Click Restart.
Click Restart to restart the computer.
After restarting the computer, remove the Setup CD-ROM and keep it in a safe place.
When using Mac OS X v.10.3.9, before using the Operation Panel on...