Canon Pixma Mp980 Quick Start Guide

  
(E)
(D)
43
Confirm the message on the LCD (E) and press the OK 
button.
Print Head Alignment takes about 7 minutes to complete. 
Wait until the pattern is printed, then go to the next step.
•
Load a sheet of supplied speciality paper (MP-101) in the Rear Tray (D).
For details, refer to "22 Loading Paper" on page 58.•
Be sure to use the supplied speciality paper (MP-101) for Automatic Print Head Alignment.
MP-101 cannot be fed from the Cassette. Load it in the Rear Tray.
MP-101 has the...

0
(E)
(F)
5
65
Make sure that a pattern similar to the one shown in the 
illustration is printed.
When an error message is displayed on the LCD, refer to "An Error Message Is Displayed on the LCD" in "Troubleshooting" in the on-screen manual: Advanced Guide.
The pattern is printed in black and blue.
•
•
For details, refer to "22 Loading Paper" on page 58.
Close the Paper Output Tray to make it easier to pull out the Cassette.
•
•
Confirm the message on the LCD (E), then load...

  
6
Confirming the Setup Flow
C o n f i r m i n g   Yo u r   C o n n e c t i o n   Ty p e■
Before starting setup, decide on the most suitable connection method for the machine.
This machine can be used over a wireless or wired LAN, as well as via USB connection.
Wireless LANUSBWired LAN
Before connecting the machine to the network, confirm that configuration of the computer and network devices (router, access point, etc.) is complete, and that the computer can connect to t\
he network. For...


6
Quit all running applications before installation.
Log into a user account with the administrator privilege.
Do not switch user accounts during installation.
It may be necessary to restart your computer during the installation pro\
cess. 
Follow the on-screen instructions and click OK, and do not remove the Setup CD-ROM during restarting. The installation resumes from where it left off when your computer has been restarted.
Since Mac OS 9, Mac OS X Classic environments, Mac OS X v.10.3.8 or...

  
A
B
C
G
H
I
J
K
D
E
F
Which connection method do you intend to use?
USB
S e t u p   F l o w■
8(P.15)9(P.18)1 3(P.31)
1 4(P.34)1 5(P.39)
7(P.14)8(P.15)1 0(P.19)1 3(P.31)
7(P.14)1 4(P.34)1 6(P.40)1 9(P.47)
7(P.14)8(P.15)1 3(P.31)1 1(P.23)
7(P.14)1 4(P.34)1 9(P.47)1 7(P.42)
2 1(P.53)8(P.15)1 3(P.31)
2 0(P.50)8(P.15)1 2(P.28)1 3(P.31)
2 0(P.50)1 4(P.34)1 8(P.46)1 9(P.47)
8(P.15)1 2(P.28)1 3(P.31)
1 4(P.34)1 8(P.46)1 9(P.47)
Is this your first time connecting the machine to the network?
Network...


7
13452
D
F
C
E
(A)
Use the Easy-Scroll Wheel (A) or the 
[ or ] button to select Settings, then 
press the OK button.
Select Device 
settings, then press 
the OK button.
Select LAN settings, 
then press the OK 
button.
Select Change 
wireless/wired, then 
press the OK button.
Select either to the 
connection method, 
then press the OK 
button.
Setup the Machine and the Computer
Machine's LAN Setting
Next, read "Install the Software" !
Windows
Macintosh
(P.15)8
(P.34)1 4
 

  
12
A
C
G
I
J
E
8
1
2
3
Click Cancel to quit the screen.
Proceed from .
Remove the USB cable connected to 
your computer.
(A)
The screen may close. In this case, proceed 
from .
Install the Software
Setup the Machine and the Computer
Windows
Turn on the computer, then insert the 
Setup CD-ROM into the CD-ROM drive.
Operating noise continues for about 30 seconds until the machine turns off. Make sure that the POWER lamp (B) stops flashing.
•
Press the ON button (A) to TURN 
OFF THE MACHINE....


345
C
A
E
G
I
J
8
Windows VistaWindows Vista
AutoPlay screen appears, 
click Run Msetup4.exe.
User Account Control screen 
appears, click Continue.
If the same screen reappears in 
subsequent steps, click Continue.
Click Easy Install.
The drivers, application software, and on-screen manuals are installed automatically.
If you want to select particular items to install, click Custom Install and follow the on-screen instructions to proceed with the installation.•
 

  
7
A
C
G
I
J
E
6
USB
Wired LAN
(P.28)
Wireless LAN
Additional 
Computer
(P.18)
(P.19)
(P.23)
(P.28)
(P.28)
Go to either of the following procedures 
according to your connection method!
9
1 0
1 1
1 2
1 2
1 2
Windows
J
E
C
A
Read the License Agreement screen 
carefully and click Yes.
Installation starts.
Follow any on-screen instructions to install the software.•
Click Install.
Move the cursor over items to display 
explanations.
WPS
WCNI
G
 


USB
12
A
9
Windows
When the Printer Connection screen appears, connect the machine to the computer with a 
USB cable, then turn on the machine.
USB Connection
Setup the Machine and the Computer
Next, read "13 Information" on page 31!
When the machine is recognized by the computer, a message appears on the screen.
If you cannot go to the next procedure after 10 minutes, click Help and confirm the message.
•
•
The USB port is located on the right side at the back of the machine.•
On the...