Home > Canon > Printer > Canon Pixma Mp980 Quick Start Guide

Canon Pixma Mp980 Quick Start Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Pixma Mp980 Quick Start Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    Make sure to read this manual before using the machine. Please keep it in hand for future reference.
    MP980
    Getting Started
    =Read Me First=
    series
    Photo All-In-One
     
    						
    							
    S y m b o l s■
    The following symbols are used to mark important instructions. Observe these instructions.
    Instructions that, if ignored, could result in personal injury or material damage.
    Instructions that must be observed for safe operation.
    Additional explanations.
    Descriptions for operations that take some time to complete.
    Model Number: K10327(MP980)
    Microsoft is a registered trademark of Microsoft Corporation.
    Windows is a trademark or registered trademark of Microsoft Corporation \
    in the U.S. and/or other countries.
    Windows Vista is a trademark or registered trademark of Microsoft Corporation in \
    the U.S. and/or other countries.
    Macintosh, Mac, and AirPort are trademarks of Apple Inc., registered in the U.S. and other countries.
    Wi-Fi is a registered trademark of the Wi-Fi Alliance. The Wi-Fi CERTIFIED logo is a certification mark of the Wi-Fi Alliance.
    •
    •
    •
    •
    •
     
    						
    							
      
    Contents
    Unlock the Scanning Unit (Cover)
    Align the Print Head
    After Installing the Machine
    Loading Paper
    Setup the Machine and the Computer
    Confirming the Setup Flow
    Install the Ink Tanks
    Install the Print Head
    Turn the Power On
     
    						
    							
    
    (B)
    (C)
    (A)
    1
    1
    1
    3
    2
    Unlock the Scanning Unit (Cover)
    F i r s t ,   c h e c k   t h e   i n c l u d e d   i t e m s
    Manuals
    Setup CD-ROM (containing the drivers, applications and on-screen manuals)
    Warranty
    MP-101 paper (for Automatic Print Head Alignment)
    •
    •
    •
    •
    Close the Document Cover (B).
    Open the Document Cover (B).
    Move the Scanner Lock Switch (C) towards the 
    release mark to unlock the Scanning Unit (Cover).
    Before turning on the machine, remove all the orange tapes and the protective sheets.•
    Open the Paper Output 
    Tray with your hands, and 
    take out the Print Head.
    The Print Head is placed 
    inside of the Paper Output 
    Tray (A).
    A USB cable is necessary to connect the machine with your computer.•
    ink tank
    Print Head
    power cord
     
    						
    							
      
    (1)
    (2)
    (A)
    (B)
    (C)
    (D)
    2
    231
    Turn the Power On
    Do NOT connect the USB cable at this stage.•
    Plug in the power cord on the left 
    side at the back of the machine and 
    connect the other end to the wall 
    outlet.
    Open the Operation Panel (A), then press the ON button (B) 
    to turn on the machine.
    Make sure that the Document Cover (C) is closed.
    If an unintended language is displayed on the LCD, press the Back button on the Operation Panel to return to the Language selection screen.
    •
    •
    Use the { or } button (D) on the 
    Operation Panel to select the language 
    for the LCD, then press the OK button. 
    The standby screen is displayed.
    The machine may make some operating noises. This is normal operation.•
     
    						
    							
    
    (E)
    (A)
    (B)
    (C)
    (D)
    3
    12
    Install the Print Head
    Raise the Print Head Lock Lever (E).Open the Paper Output Tray (A), then lift the 
    Scanning Unit (Cover) (B) until it locks into place.
    The Scanning Unit (Cover) (B) is fixed automatically.
    The Print Head Holder (C) comes out. (This is where 
    you install the Print Head.)
    For your safety, always grip as illustrated.
    Close the Document Cover (D) and lift it with the 
    Scanning Unit (Cover).
    •
    •Firmly raise the Print Head Lock Lever until it stops. (The Print Head Lock Lever may feel heavy.)•
    If the Print Head Holder does not move, make sure that the machine is turned on.•
    Do not handle the Print Head roughly such as applying them excessive pressure or dropping them.
    •
    The Print Head Holder makes a noise as it moves. This is normal operation.•
     
    						
    							
      
    (E)
    543
    Remove the Print Head from 
    the silver package.
    Remove and discard the orange protective 
    cap.
    Tilt the Print Head and set it in place. Lower the Print Head Lock 
    Lever (E) completely.
    There may be some transparent or light blue ink on the inside of the bag\
     the Print Head comes in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on yourself when handling these items. Be care\
    ful not to stain your hands.
    •
    Do not knock the Print Head against the sides of the Holder.
    Be sure to install it in a well-lit environment.
    Pinch the Print Head Lock Lever firmly and lower it gently.
    Once you have installed the Print Head, do not remove it unnecessarily.
    •
    •
    •
    •
     
    						
    							
    
    (1)
    (2)
    (A)
    4
    12
    Install the Ink Tanks
    Do not hold the sides of the ink tank; ink may splash.•
    Pull the orange tape (1) in the direction of the 
    arrow to peel off the protective film and remove 
    the film (2) completely.
    If the Print Head Holder moves to the right, close and reopen the Scanning Unit (Cover).
    Be sure to use the supplied ink tanks.
    •
    •
    Do not handle the ink tanks roughly such as applying them excessive pressure or dropping them.
    •
    While pressing down with your left thumb, twist 
    off the orange protective cap (A) located on the 
    bottom of the ink tank.
     
    						
    							
      
    (B)
    453
    Install all the other ink tanks in the same 
    way.
    Install all the ink tanks.
    Close the Scanning Unit (Cover) (B).
    Wait until the screen above appears (about 6 
    minutes) and go to the next step.
    The machine may make some operating noises 
    when preparing to print. This is normal operation.
    •
    •
    Once you have installed the ink tanks, do not remove them unnecessarily.•
    Make sure all the Ink lamp lights red.•
    For your safety, always grip as illustrated.•
    If an error message is displayed on the LCD, make sure that the Print Head and the ink tanks are correctly installed.
    •
    Press the PUSH mark on the ink tank until 
    it clicks into place.
    Make sure the Ink lamp lights red.
    I n s t a l l   t h e   I n k   Ta n k
    Be sure to install it in a well-lit environment.•
    Match the labels when installing.•
     
    						
    							
    
    (C)(C)
    (A)
    (B)
    5
    21
    Align the Print Head
    Align the Print Head for better print results. 
    This takes about 7 minutes.
    Use a sheet of supplied speciality paper 
    (MP-101) for alignment.
    Make sure that the Output Tray Extension (B) is extended.•
    Open the Paper Support (A) and pull it out.Move the Paper Guides (C) to both edges.
     
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Pixma Mp980 Quick Start Guide