Canon Pixma Mp540 User Guide

7.Load the original on the Platen Glass following the instruction on the LCD.
Note
Refer to Loading Paper / Originals for how to load the original on the Platen Glass.
8.Press the Color button for color scanning, or the Black button for black & white
scanning.
When Preview ON is selected, press the OK button after the preview screen is displayed on the
LCD.
The machine starts scanning and scanned data is saved either on the USB flash drive or the
memory card, which you select as the media for saving...

Advanced Guide > Scanning > Saving Scanned Data on the USB Flash Drive/Memory Card Using the Operation Panel of
the Machine > Saving Scanned Data on the USB Flash Drive/Memory Card Using the Operation Panel of the Machine >
Setting Items
Setting Items
Scan document screen
Perform settings in saving scanned data on the USB flash drive or memory card.
1.Document type
Select the type of the original on the Platen Glass.
2.Scan size
Select the size of the original on the Platen Glass.
3.Scan resolution...

A printout consists of minute dots to make characters or graphs. Interfering with each dot may
result in uneven shades or a striped pattern. Select Descreen ON if you notice any uneven
shades or a striped pattern on the scanned image.
Note
Even if Descreen is set to ON, some moire effects may remain if Unsharp Mask is set to
ON. In that case, set Unsharp Mask to OFF.
4.Hide show-through*1
Characters on the back may show through when scanning a thin document such as a
newspaper. Select Hide show through...

Advanced Guide > Scanning > Saving Scanned Data on the USB Flash Drive/Memory Card Using the Operation Panel of
the Machine > Saving Scanned Data on the USB Flash Drive/Memory Card Using the Operation Panel of the Machine >
Deleting Scanned Data on USB Flash Drive/Memory Card
Deleting Scanned Data on USB Flash Drive/Memory Card
You can delete scanned data on the USB flash drive or memory card using the Operation Panel.
1.Select  Scan on the HOME screen, then press the OK button.
2.Insert the USB flash...

Advanced Guide > Scanning > Saving Scanned Data to PC Using the Operation Panel of the Machine
Saving Scanned Data to PC Using the Operation Panel of the
Machine
Saving Scanned Data to PC Using the Operation Panel of the Machine
Appendix: Various Scan Settings
Page top
Page 365 of 758 pages Saving Scanned Data to PC Using the Operation Panel of the Machine
 

Advanced Guide > Scanning > Saving Scanned Data to PC Using the Operation Panel of the Machine > Saving ScannedData to PC Using the Operation Panel of the Machine
Saving Scanned Data to PC Using the Operation Panel of the
Machine
You can scan images using the Operation Panel of the Machine.
Important
If the software (MP Navigator EX) is not yet installed, refer to your setup manual.
Do not insert or remove USB cables when scanning images with the machine, or when the
computer is in the sleep or standby...

Important
Make sure that the document has been loaded correctly according to the document type that
you have selected.
7.If you selected Document or Photo in step 6, select the file format, then press the 
OK button.
Save to PC: 
The original is scanned and saved.
Save as PDF file: 
The original is scanned and saved as a PDF file. This item can be selected only when Document
has been selected on the document type selection screen.
Attach to E-mail: 
The original is scanned, and the image is attached to...

original, refer to Scanning Photos and Documents and change the MP Navigator EX Document
Type and Document Size settings to match the original being scanned.
Note
The operation to be performed after scanning the original depends on the scan operation
setting you have selected in step 6. For details on how to modify the operation settings, refer to 
Selecting a Response to Commands from the Operation Panel Using MP Navigator EX.
If You Want to Edit or Print the Scanned Images
MP Navigator EX enables you...

Advanced Guide > Scanning > Scanning Images > Appendix: Various Scan Settings
Appendix: Various Scan Settings
Specifying how to respond when scanning using the Operation Panel of the machine
Selecting a Response to Commands from the Operation Panel Using MP Navigator EX
Page top
Page 369 of 758 pages Appendix: Various Scan Settings
 

Advanced Guide > Scanning > Scanning Images > Appendix: Various Scan Settings > Selecting a Response toCommands from the Operation Panel Using MP Navigator EX
Selecting a Response to Commands from the Operation Panel
Using MP Navigator EX
MP Navigator EX enables you to specify the response resulting from pressing the Color Start or Black
Start button on the machine. You can specify the response individually for each event.
1.Start MP Navigator EX.
Starting MP Navigator EX
2.Click Preferences.
The...