Canon Pixma Ip2850 User Guide

Aligning the Print Head Position from Your Computer
261
 

Ink Is Not Ejected
Check1 When a FINE cartridge runs out of ink, replace it with a new one.
Check2
 Is the FINE cartridge installed properly?
If the FINE cartridge is not installed securely, ink may not be ejected correctly.
Retract the output tray extension and the paper output tray, open the cover, then remove the FINE cartridges. Then install the FINE cartridges again. Push the FINE cartridge until it clicks into place.
After confirming that the FINE cartridge is installed properly, close the cover....

Problems with the Printer
The Printer Cannot Be Powered On
The Printer Turns Off Unintentionally
Cannot Connect to Computer Properly
FINE Cartridge Holder Does Not Move to the Position for Replacing
Printer Status Monitor Is Not Displayed
263
 

The Printer Cannot Be Powered On
Check1 Press the  ON/RESUME  button.
Check2
 Make sure that the power plug is securely plugged into the power cord
connector of the printer, then turn it back on.
Check3  Unplug the printer from the power supply, then plug the printer back in and turn
the printer back on after leaving it for at least 2 minutes.
If the problem is not resolved, contact the service center.
264
 

The Printer Turns Off Unintentionally
Check Deactivate the setting to turn the unit off automatically.
The printer turns off automatically according to the elapsed time you specified if you activate the setting to turn
the unit off automatically.
If you do not want the printer to turn off automatically, open the printer driver setup window and in  Auto Power
under the  Maintenance  sheet, select  Disable for Auto Power Off .
265
 

Cannot Connect to Computer ProperlyPrinting Speed Is Slow/Hi-Speed USB Connection Does Not Work/"This
device can perform faster" Message Is Displayed
If your system environment is not fully compatible with Hi-Speed USB, the printer will operate at a lower
speed provided under USB 1.1. In this case, the printer operates properly but printing speed may slow
down due to communication speed.
Check  Check the following to make sure that your system environment supports Hi-
Speed USB connection.
•
Does...

FINE Cartridge Holder Does Not Move to the Position for Replacing
Check1 Is the POWER  lamp off?
Check if the  POWER lamp is lit.
The FINE cartridge holder will not move unless the power is on. If the  POWER lamp is off, close the cover and
turn the printer on.
While the  POWER lamp is flashing, the printer is initializing. Wait until the  POWER lamp stops flashing and
remains lit, and then open the cover again.
Check2  Is the Alarm lamp flashing?
Close the cover, confirm the number of times the  Alarm...

Printer Status Monitor Is Not Displayed
Check Is the printer status monitor enabled?
Make sure that  Enable Status Monitor  is selected on the Option menu of the printer status monitor.
1.
Open the printer driver setup window.
How to Open the Printer Driver Setup Window
2.
On the  Maintenance  sheet, click View Printer Status .
3.
Select Enable Status Monitor  on the Option menu if it is not selected.
268
 

Problems with Installation/Downloading
Cannot Install the Printer Driver
Easy-WebPrint EX Does Not Start Up or Easy-WebPrint EX Menu Does Not
Appear
269
 

Cannot Install the Printer Driver•
If the installation does not start even after the Setup CD-ROM is inserted into your computer'sdisc drive:
Start the installation following the procedure below.
1.
Select items as shown below.
◦
In Windows 8, select the  Explorer icon in Taskbar  on Desktop , then select  Computer from
the list on the left.
◦
In Windows 7 or Windows Vista, click  Start then  Computer .
◦
In Windows XP, click  Start then  My Computer .
2.
Double-click the  CD-ROM  icon on the...