Canon Pixma Ip2850 User Guide

1700Cause
The ink absorber is almost full.
Action Press the printer's  ON/RESUME button to continue printing. Contact the service center.301
 

1701Cause
The ink absorber is almost full.
Action Press the printer's  ON/RESUME button to continue printing. Contact the service center.302
 

1890Cause
The protective material for the FINE cartridge holder or the tape may remain attached to the holder.
Action Make sure that the protective material or the tape does not remain attached to the FINE cartridge holder.
If you find the protective material or the tape remains attached, retract the output tray extension and the
paper output tray to remove the protective material or the tape.
Pull down the tape to remove the protective material.
Close the cover after removing the protective material.
If...

4100Cause
The specified data cannot be printed.
Action When you print the contents on CREATIVE PARK PREMIUM, confirm the message on the computer
screen, make sure that genuine Canon FINE cartridges are all installed properly, then start printing again.304
 

4102Cause
The media type and paper size are not set correctly.
Action Press the printer's  ON/RESUME button to cancel printing, change the media type or paper size setting,
then print again.•
When the media type is set to  Photo Paper Plus Glossy II:
Set the paper size to  4"x6" 10x15cm (Windows)/4 x 6 (Mac), or  5"x7" 13x18cm  (Windows)/5 x 7
(Mac).
•
When the media type is set to  Glossy Photo Paper:
Set the paper size to  4"x6" 10x15cm (Windows)/4 x 6 (Mac).
•
When the...

5100Cause
Printer error has occurred.
Action Cancel printing, turn off the printer. Then clear the jammed paper or protective material that is preventing
the FINE cartridge holder from moving, and turn on the printer again.
If the problem is not resolved, contact the service center.
Important
•
When you clear the jammed paper or protective material that is preventing the FINE cartridge holder
from moving, be careful not to touch the components inside the printer. The printer may not print out properly if...

5200Cause
Printer error has occurred.
Action Turn off the printer, and unplug the power cord of the printer from the power supply.
Plug the printer back in and turn the printer back on.
If the problem is not resolved, contact the service center.307
 

5400Cause
Printer error has occurred.
Action Turn off the printer, and unplug the power cord of the printer from the power supply.
Plug the printer back in and turn the printer back on.
If the problem is not resolved, contact the service center.308
 

5B00CausePrinter error has occurred.
Action Contact the service center.309
 

5B01CausePrinter error has occurred.
Action Contact the service center.310