Canon network camera VBM40 User Manual

List of Log Messages
7-17
7
Appendix
S012 External device service started [info] 
S013 External device service shut down [info] 
S014 Timer service started [info] 
S015 Timer service shut down [info] 
S070 Change to SSL certificate [info] 
S220 PAN/TILT operation warning [warning] 
S240 Camera error [warning] 
S250 PAN/TILT error [warning] 
Description starting extio (S012) 
Meaning The external device input/output service was started.
Description shutdown extio (S013) 
Meaning The external device...

7-18
S306 Error on saving settings [err] 
S307 Error on saving settings [err] 
S310 Working error in event service [err] 
S311 Working error in external input/output service [err] 
S312 Working error in timer service [err] 
S320 PAN/TILT operation error [err] 
Description Cant update system settings (S306) 
Meaning An error generated while the system was saving setting. Setting could not be saved. 
CountermeasureProvide enough memory space by deleting unnecessary files in the user memory area, etc....

List of Log Messages
7-19
7
Appendix
S410 Event service initialization error [crit] 
S411 External input/output service initialization error [crit] 
S412 Timer service initialization error [crit] 
S413 Timer service runtime error [crit] 
Description event initialization error [%1] [%2] (S410) 
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the event service. 
CountermeasureIf the problem persists after rebooting, the camera is faulty. Arrange for servicing....

7-20
Messages displayed in the Information Field
Messages displayed in the information field of the viewer are classified into the following three types.
„Information Message
„Warning Message
List of Viewer Messages
IconCategoryExplanation
  Information Message Help messages on various buttons, pull-down lists, etc., as well as PTZ, frame rate and 
other information from the camera are shown. 
Warning Message A message will be displayed notifying the user when camera control privileges cannot 
be...

7-21
7
Appendix
Since this camera supports various functions, it is recommended that you write down the settings for respective functions. 
If you have forgotten the settings and want to set the camera from the beginning, restore the factory default settings first. 
*For factory default settings, see P. 7-23. 
Restoring the Initial Setting from the 
Maintenance Page in the Web Browser
To display the settings menu, you need to enter the IP 
address of the camera, user name and administrator 
password (P....

7-22
Important
If the reset switch is pushed, network-related settings will also 
be restored to factory default settings including the cameras IP 
address, subnet mask, default gateway address etc. 
Accordingly, you can no longer operate the camera from the 
PC you were using to connect to the camera before. When 
initializing the camera, use the “VB Initial Setting Tool v5.0.1” 
installed in your PC to set an IP address appropriate for the 
environment in which the camera is used (see “Performing...

7-23
7
Appendix
The factory default settings are shown. If you have changed the settings, be sure to write down the new settings. 
List of Factory Default Settings
ItemSettingSetting 1
 (year/month/day) Setting 2
 (year/month/day) 
  User Name (Administrator ID) 
  Administrator passwordroot
camera
  Path to setting pages admin

LAN Interface
Maximum Packet Size

IPv4 Address Setting Method
IPv4 Address 
Subnet Mask
IPv4 Default Gateway Address 

IPv6
Auto
IPv6 Address (Manual) 
Prefix Length
IPv6...

7-24
 Camera Name
Camera Name (alphanumeric characters) 
 Initial Camera Settings
AE Mode
Slow Shutter
Shutter Speed
Exposure Compensation
Metering Mode
Focus Mode
Smart Shade Control
White Balance
    R Gain 
    B Gain 
 Camera Control
Digital Zoom
Image Stabilizer
 Day/Night
Mode
    Switching Brightness
    Response (sec.) 
 Installation Conditions
Dome
LED Setting
Image Flip
 Camera Position Control
Restricted to Presets
Camera Position without Control
 External Input Device 1
Device Name...

List of Factory Default Settings
7-25
7
Appendix
 General Upload
Upload
 HTTP Upload
Notification
URI
User Name
Password
Proxy Server
Proxy Port
Proxy User Name
Proxy Password
Parameter (query string) 
 FTP Upload
Notification
FTP Server
User Name
Password
PASV Mode
File Upload Path
File Naming
    Subdirectory Name to Create
    File Name to Create
    Maximum Number of Loops
 E-mail Notification
Notification
Mail Server Name
Mail Server Port 
Sender (From) 
Recipient (To) 
Authentication
    User Name...

7-26
 Image Server
Maximum Number of Clients
Maximum Control Queue Length
Maximum Connection Time (sec.) 
Camera Control Time (sec.) 
 Audio Server
Audio Transmission from the Camera
    Input Volume
    Voice Activity Detection
Audio Reception from the Viewer
    Output Volume
    Echo Canceller
    Audio Input
 HTTP Server
Authentication Method
HTTP Port
HTTPS PortGlobal Address for the Web Page
IPv4 Address
(global address for the web page) 
Port Number
(global address for the web page) 30
30
0
20...