Canon network camera VBM40 User Manual
Here you can view all the pages of manual Canon network camera VBM40 User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
Intelligent Function Setting Tool
5-27
5
Admin Tools
Setting Intelligent Function Detection
Settings
„Setting Detection Criteria ([Detection
Criteria] tab)
Set detection criteria while operating the camera and
checking the image in the image display area.
1[Detection Setting Name]
You can use up to 64 characters in a detection setting
name. Be sure to enter a single-byte alphanumeric
detection setting name.
In a [Detection Setting Name], ASCII characters
(spaces or printable characters) can be...](http://img.usermanuals.tech/thumb/14/1386/w300_network-camera-vbm40-1478296322_d-90.png "Page 91
Intelligent Function Setting Tool
5-27
5
Admin Tools
Setting Intelligent Function Detection
Settings
„Setting Detection Criteria ([Detection
Criteria] tab)
Set detection criteria while operating the camera and
checking the image in the image display area.
1[Detection Setting Name]
You can use up to 64 characters in a detection setting
name. Be sure to enter a single-byte alphanumeric
detection setting name.
In a [Detection Setting Name], ASCII characters
(spaces or printable characters) can be...")
Intelligent Function Setting Tool 5-27 5 Admin Tools Setting Intelligent Function Detection Settings „Setting Detection Criteria ([Detection Criteria] tab) Set detection criteria while operating the camera and checking the image in the image display area. 1[Detection Setting Name] You can use up to 64 characters in a detection setting name. Be sure to enter a single-byte alphanumeric detection setting name. In a [Detection Setting Name], ASCII characters (spaces or printable characters) can be...
Page 92
![Page 92
5-28
[Upload] checkbox
When selected, upload is performed at the timing set in
1. General upload must be set in advance under
[Upload] in the Setting page (P. 4-15).
3Specify the audio playback timing.
[Audio Playback at ON Event] checkbox
When selected, the sound set in 4 [Sound Clip Name]
is played at the moment detected mode is triggered to
ON.
[Audio Playback at OFF Event] checkbox
When selected, the sound set in 4 [Sound Clip Name]
is played at the moment detected mode is turned OFF.
4Set the...](http://img.usermanuals.tech/thumb/14/1386/w300_network-camera-vbm40-1478296322_d-91.png "Page 92
5-28
[Upload] checkbox
When selected, upload is performed at the timing set in
1. General upload must be set in advance under
[Upload] in the Setting page (P. 4-15).
3Specify the audio playback timing.
[Audio Playback at ON Event] checkbox
When selected, the sound set in 4 [Sound Clip Name]
is played at the moment detected mode is triggered to
ON.
[Audio Playback at OFF Event] checkbox
When selected, the sound set in 4 [Sound Clip Name]
is played at the moment detected mode is turned OFF.
4Set the...")
5-28 [Upload] checkbox When selected, upload is performed at the timing set in 1. General upload must be set in advance under [Upload] in the Setting page (P. 4-15). 3Specify the audio playback timing. [Audio Playback at ON Event] checkbox When selected, the sound set in 4 [Sound Clip Name] is played at the moment detected mode is triggered to ON. [Audio Playback at OFF Event] checkbox When selected, the sound set in 4 [Sound Clip Name] is played at the moment detected mode is turned OFF. 4Set the...
Page 93
![Page 93
Intelligent Function Setting Tool
5-29
5
Admin Tools
Detect criteria for [Abandoned Object Detection]
Set areas where you want to detect abandoned objects as
detection areas.
[Object size (%)]
Enter a value or move the slider to set the ratio of the size
of an object that was left behind in the detection area to
the size of the detection area.
When [Object Size (%)] is changed, an indicator frame
showing the size of the object is displayed for 1 second in
the center of the image display area,...](http://img.usermanuals.tech/thumb/14/1386/w300_network-camera-vbm40-1478296322_d-92.png "Page 93
Intelligent Function Setting Tool
5-29
5
Admin Tools
Detect criteria for [Abandoned Object Detection]
Set areas where you want to detect abandoned objects as
detection areas.
[Object size (%)]
Enter a value or move the slider to set the ratio of the size
of an object that was left behind in the detection area to
the size of the detection area.
When [Object Size (%)] is changed, an indicator frame
showing the size of the object is displayed for 1 second in
the center of the image display area,...")
Intelligent Function Setting Tool 5-29 5 Admin Tools Detect criteria for [Abandoned Object Detection] Set areas where you want to detect abandoned objects as detection areas. [Object size (%)] Enter a value or move the slider to set the ratio of the size of an object that was left behind in the detection area to the size of the detection area. When [Object Size (%)] is changed, an indicator frame showing the size of the object is displayed for 1 second in the center of the image display area,...
Page 94
![Page 94
5-30
[Change Ratio (%)], contour lines take on the same color
as the detection area, indicating that “detected” mode
has been triggered to ON.
Note
Right-click on the Intelligent Function Setting Tool display screen
to display the menu. There, the following functions can be used.
[Copy detection area]
Copy the detection area of the detection setting selected.
[Paste detection area]
Paste the copied detection area to the detection setting
selected.
It cannot be copied to camera tampering...](http://img.usermanuals.tech/thumb/14/1386/w300_network-camera-vbm40-1478296322_d-93.png "Page 94
5-30
[Change Ratio (%)], contour lines take on the same color
as the detection area, indicating that “detected” mode
has been triggered to ON.
Note
Right-click on the Intelligent Function Setting Tool display screen
to display the menu. There, the following functions can be used.
[Copy detection area]
Copy the detection area of the detection setting selected.
[Paste detection area]
Paste the copied detection area to the detection setting
selected.
It cannot be copied to camera tampering...")
5-30 [Change Ratio (%)], contour lines take on the same color as the detection area, indicating that “detected” mode has been triggered to ON. Note Right-click on the Intelligent Function Setting Tool display screen to display the menu. There, the following functions can be used. [Copy detection area] Copy the detection area of the detection setting selected. [Paste detection area] Paste the copied detection area to the detection setting selected. It cannot be copied to camera tampering...
Page 95
![Page 95
5-31
5
Admin Tools
This tool lets you view the operating condition log of the camera.
„Display Screens of Log Viewer
1[Download]
Download log files from this camera or SD memory
cards.
2[Reload]
Reload the displayed log file and show the latest logs.
3[Previous File]
If there are multiple log files in the cameras internal
memory or SD memory card, load and display the file
before the currently shown log list.
4[Next File]
If there are multiple log files in the internal memory or
SD memory card,...](http://img.usermanuals.tech/thumb/14/1386/w300_network-camera-vbm40-1478296322_d-94.png "Page 95
5-31
5
Admin Tools
This tool lets you view the operating condition log of the camera.
„Display Screens of Log Viewer
1[Download]
Download log files from this camera or SD memory
cards.
2[Reload]
Reload the displayed log file and show the latest logs.
3[Previous File]
If there are multiple log files in the cameras internal
memory or SD memory card, load and display the file
before the currently shown log list.
4[Next File]
If there are multiple log files in the internal memory or
SD memory card,...")
5-31 5 Admin Tools This tool lets you view the operating condition log of the camera. „Display Screens of Log Viewer 1[Download] Download log files from this camera or SD memory cards. 2[Reload] Reload the displayed log file and show the latest logs. 3[Previous File] If there are multiple log files in the cameras internal memory or SD memory card, load and display the file before the currently shown log list. 4[Next File] If there are multiple log files in the internal memory or SD memory card,...
Page 96
![Page 96
5-32
A d[Date & Time]
Set the date and time of the log you want to show using
the filter function.
Select the [Specify start date & time] or [Specify end
date & time] checkbox to set the date and time.
A f[Apply filter]
Show the filtered logs in the log display area.
A g[Search for]
Enter the character string for which you want to search.
A h[Match case] checkbox
Specify whether or not to enable case sensitivity in
search commands. When selected, character strings
perfectly matching the case in...](http://img.usermanuals.tech/thumb/14/1386/w300_network-camera-vbm40-1478296322_d-95.png "Page 96
5-32
A d[Date & Time]
Set the date and time of the log you want to show using
the filter function.
Select the [Specify start date & time] or [Specify end
date & time] checkbox to set the date and time.
A f[Apply filter]
Show the filtered logs in the log display area.
A g[Search for]
Enter the character string for which you want to search.
A h[Match case] checkbox
Specify whether or not to enable case sensitivity in
search commands. When selected, character strings
perfectly matching the case in...")
5-32 A d[Date & Time] Set the date and time of the log you want to show using the filter function. Select the [Specify start date & time] or [Specify end date & time] checkbox to set the date and time. A f[Apply filter] Show the filtered logs in the log display area. A g[Search for] Enter the character string for which you want to search. A h[Match case] checkbox Specify whether or not to enable case sensitivity in search commands. When selected, character strings perfectly matching the case in...
Page 97
![Page 97
Log Viewer
5-33
5
Admin Tools
„Showing All Logs
Select the [Show all logs] checkbox.
When selected, even logs without a log code are shown if
[Not specified] is selected for the log type [Filter].
„Showing Filtered Logs
You can filter logs by type, code and date & time to show
only the necessary information.
Set the following conditions and click [Apply filter] to show
only the logs matching the specified conditions.
[Log Type]
Select the [Specify type] or [Specify code] checkbox to
filter logs by...](http://img.usermanuals.tech/thumb/14/1386/w300_network-camera-vbm40-1478296322_d-96.png "Page 97
Log Viewer
5-33
5
Admin Tools
„Showing All Logs
Select the [Show all logs] checkbox.
When selected, even logs without a log code are shown if
[Not specified] is selected for the log type [Filter].
„Showing Filtered Logs
You can filter logs by type, code and date & time to show
only the necessary information.
Set the following conditions and click [Apply filter] to show
only the logs matching the specified conditions.
[Log Type]
Select the [Specify type] or [Specify code] checkbox to
filter logs by...")
Log Viewer 5-33 5 Admin Tools „Showing All Logs Select the [Show all logs] checkbox. When selected, even logs without a log code are shown if [Not specified] is selected for the log type [Filter]. „Showing Filtered Logs You can filter logs by type, code and date & time to show only the necessary information. Set the following conditions and click [Apply filter] to show only the logs matching the specified conditions. [Log Type] Select the [Specify type] or [Specify code] checkbox to filter logs by...
Page 98
5-34
Page 99
Chapter 6 Admin Viewer/VB Viewer ❏Differences between the Admin Viewer and the VB Viewer ❏User Authorities and Camera Control Privileges ❏Viewer Startup and Operation ❏Camera Control and Obtaining Camera Control Privileges ❏Admin Viewer Operation and Settings
Page 100
6-2 The camera comes loaded with a viewer. Accessing this viewer via a web browser allows you to display images and operate the camera via pan, tilt and zoom controls, etc. Two types of viewer are available, the Admin Viewer and the VB Viewer. Major Differences Between the Admin Viewer and the VB Viewer The operable ranges differ between the viewers. Admin Viewer: In addition to displaying images from the camera, you can use the basic camera controls such as pan, tilt and zoom operations as well...