Canon network camera VBM40 User Manual

Preset Setting Tool
5-17
5
Admin Tools
Display Screens of Preset Setting Tool
Preset Setting Tool has two display screens, the [Preset] tab and the [Preset Tour] tab.
With the [Preset] tab, up to 20 presets and the home position are set while referring to the panorama screen. 
With the [Preset Tour] tab, “Preset Tour” is set whereby the camera tours and monitors multiple presets.
The following explains the [Preset] tab display screen.
For the [Preset Tour] tab, see “Preset Tour” (P. 5-20).
„[Preset] Tab...

5-18
8[Preset] tab, [Preset Tour] tab
Switch between the preset setting tab and preset tour 
setting tab.
9[Preset/Home Position] selection box
Select the preset (from 1 to 20) or [home position] you 
want to set.
A q[Quick Registration] 
Load the current camera position and the other 
detailed settings of A
s, and register them as preset 
settings.
A a[Preset Name]
You can enter a preset name of up to 64 characters. 
You can set a name in alphanumeric characters. Be 
sure to enter a single-byte...

Preset Setting Tool
5-19
5
Admin Tools
Setting the Preset
A preset can be set in one of the following two ways. 
„Setting from Camera Angle in the Image 
Display Area
„Use the preview frame of the panorama 
screen to set presets.
Use the preview frame of the panorama screen to set 
presets. 
Be sure to enter the preset name. If you click on the panorama image, the preview frame 
will move to center on the clicked point.
The settings are reflected in the preview frame on the 
panorama screen and the image...

5-20
Note
 Up to 20 presets can be set. 
 Changes to preset settings are not reflected in already 
connected viewers.
 You can disable presets in the viewer by clearing the [Show in 
viewers] checkbox under [Detailed settings]. 
 Preset positions cannot be set in the digital zoom area. 
Preset Tour
Set a preset tour whereby the camera tours and monitors 
the multiple presets currently set. 
„[Preset Tour] Tab Display Screen
1[Preset Tour] selection box. 
Select when you want to perform a preset tour from...

Preset Setting Tool
5-21
5
Admin Tools
8[Speed (Z)] 
Select [Slow] or [Fast] for the camera speed during 
zoom. 
9[Pause (sec)] 
Set the time at which the camera stops at the preset 
position between 0 and 120 seconds in 5-second units. 
A q[Add] 
Add the preset to the tour schedule list. 
A a[Change] 
Change the speed or pause time between presets 
selected from the tour schedule list.
Note
 Preset tour is not performed while the camera is being 
controlled with viewers, Admin Tools, etc.
 Preset tour...

5-22
This tool is used to set intelligent function that perform uploads, notify the viewer, audio playback, etc., if a change has 
occurred in the captured image due to movement of a subject. 
The intelligent functions can perform the following 5 types of detection. Use detection types that best serve your needs.
Intelligent Function Setting Tool
Admin Viewer
RM Viewer Camera
E-mail notification
Network
Video recording on storage serverUpload to FTP 
server/HTTP server Volume
Moving 
object
Camera...

Intelligent Function Setting Tool
5-23
5
Admin Tools
Caution
Notes on Use of This Camera
The intelligent functions are not suitable for applications where high reliability is required. If utmost and constant 
reliability is required for surveillance, it is not recommended that you use this function. Canon shall assume no 
liability for any accident, loss or other undesirable outcomes resulting from intelligent function operations. 
Removed Object Detection
Detect objects that are being removed. This...

5-24
Display Screen of Intelligent Function Setting Tool
1Image Display Area
The image currently captured by the camera is shown. 
Detection areas are shown in translucently colored 
frames (rectangle or polygonal). Drag to resize the 
frames. Also, subjects for which movement has been 
detected are shown with a contour line. 
Pan, tilt, and zoom operations are the same as in the 
VB-M40 Viewer. For details, see “How to Operate the 
Viewer” (P. 6-5).
However, when the 9 [Lock camera position] 
checkbox...

Intelligent Function Setting Tool
5-25
5
Admin Tools
7[Display Options] 
Select the [Detection Area] or [Detection Results] you 
want to show in the image display area from the 
following items.
Selected Detection Settings Only] 
Show only the detection areas or detection results 
for detection settings selected in the detection 
setting list.
 [All Detection Settings] 
Show the detection areas or detection results for all 
detection settings in the detection setting list.
Settings of the Same Type]...

5-26
Flow of Intelligent Function Setting
The intelligent functions are set according to the 
procedure below. For details on the setting method, see 
each setting page. 
For details on the preset setting method, see “Preset 
Setting Tool” (P. 5-16).
Obtain camera control privileges and select [Lock 
camera position] before selecting a preset.
Set presets in advance using Preset Setting Tool 
(P. 5-16).
When you click [Add] in the [Detection Setting List], 
the [New Detection Settings] dialog box is...