Canon network camera VBH651V User Manual

Camera Viewer
4
71
Setting the Clear IR Mode
If you click the [Clear IR Mode] button to enable it (mak e it purple), the video becomes black and white, which 
reduces shade and heat shimmer in far backgrounds.
 Switching Day/Night
Set the shooting mode according to the brightness  of the installation environment of the camera.
For details on this function, see [D ay/Night] on “Setting Page” (P. 114).
Using Backlight Compensation
Click [BLC] to brighten video that is dark due to backlight.
The back...

72
Using Presets or the Home Position
It is possible to control the camera using a preset or home position registered to the camera in advance.
When you click the preset selection menu and select a preset from the list that is displayed, the camera will move to the 
camera angle of the selected preset.
Clicking the [Home Position] button will move the camera angle to the home position.
Note
Register preset/home positions in advance in [Camera] > [P reset] > [Preset Registration] (P. 126) on the Setting...

Camera Viewer
4
73
Viewer PTZ and Digital PTZ are both functions which allow easy panning, tilting and zooming using the digital zoom.
Magnifying and Display Part of Video (Viewer PTZ)
You can use the Viewer PTZ to magnify part of a video (using digital zoom) without moving the camera.
This feature does not use the came ra’s pan, tilt, or zoom features, making it useful fo r situations like the use of the intelligent 
function, where you do not want  to change the camera position.
Note
 You cannot record...

74
Move or Resize by Dragging
Press the mouse button inside the frame and drag it to move the preview frame.
If you press the mouse button and drag outside the frame, a new preview frame will be drawn.
You can resize the preview frame by  dragging an edge of the frame.
Move by Clicking
If you click outside the frame, the preview frame will move and center on that point.
Move Using the Sliders 
You can use the pan, tilt and zoom sliders in th e video display area to move the preview frame.
Note
The Viewer...

Camera Viewer
4
75
Cropping Video With Digital PTZ Panel
The [Digital PTZ] button changes active (purple), and the Digital PTZ panel is shown in the control display area.
The preview frame operatio ns are the same as with the Viewer PTZ (P. 73).
The preview frame size can be set to any of 5 sizes. The  screen sizes according to the setting in [Basic Settings] 
> [Video Settings] > [All Videos] > [Video  Size Set] (P. 101) on the Setting Page.
 When the aspect ratio 16:9 is selected: 640  x 360, 512 x...

76
Note
The Digital PTZ uses digital zoom, so the higher the digital zoom ratio, the lower the video quality.
Using Presets or the Home Position 
You can use a registered preset or home posi tion to specify the range for Digital PTZ.
If you select a preset, the preview frame on the Digital PTZ  panel moves to the preset position, and the video inside 
the frame is displayed in the video display area.
Note
Register presets in advance in [Camera] > [Preset]  > [Preset Registration] on the Setting Page (P....

Camera Viewer
4
77
You can take snapshots while checking the video in the video display area.
The snapshot panel is opened in the control display area and the still image from the  instant that the button was 
clicked is displayed.
If you click the [Snapshot] button  again, the image displayed in the Snapshot panel will be updated.
Note
 The snapshot is saved as a JPEG file.
 The saved snapshots are the same size as the reception video size.
Saving Snapshots
1
Click the [Snapshot] button  at the moment...

78
Manually record video being displayed in the video display area to a memory card inserted in the camera.
Note
 You can manually record video if the following conditions have been met.
– The memory card inserted in the camera is mounted.
– [Operation Settings] is set to [Save Logs  and Videos] in [Video Record] > [Memory Card ] > [Memory Card Operations] (P. 204) in the 
Setting Page.
 The format and size of the video recorded to a memory card depends on the settings configured on the Setting Page. –...

Camera Viewer
4
79
Confirming Recorded Video
Use the Recorded Video Utility to confirm and play back the video manually recorded to a memory card.
For details, please refer to “Recorded Video Utility User Manual”. 

80
Open the [Video and Audio] menu to set the audio reception from the camera and the audio transmission from the Viewer 
and the corresponding volumes.
Receiving Audio
Receive audio from the microphone connected to the camera and play it back in the Viewer.
Audio reception starts.
The [Audio Reception] button icon will change  to active (purple) while receiving audio.
Note
 To receive audio, you must connect the microphone to the camera  and set [Server] > [Audio Server] > [Audio Transmission from 
the...