Canon network camera VBH651V User Manual

Camera Viewer
4
61
You can set the size and format of the video received from the camera and the size of the display screen on the computer.
Changing the Reception Video Size/ Format and Display Screen Size
Open the   [Video and Audio] menu and c onfigure the video received from the camera.
(1) Video Size Select the size and format of  video received from the camera.
The sizes that can be selected depend on the setting in  [Basic] > [Video] > [All Videos] > [Video Size Set] on the 
Setting Page (P....

62
* [1920 x 1080 / 960 x 540 / 480 x 270] cannot be set for [Video Size Set] (P. 101). 
(4) Max. Frame Rate (JPEG) You can select the maximum frame rate for JPEG video.
The setting is not selectable when displa ying H.264 video in the video display area.
Displaying in Full Screen Mode
You can display the video display area in full screen mode by  clicking the [Full Screen Mode] button in the upper right of 
the Viewer.
Menus
When the full screen view is used, the menu panels required for controlling t...

Camera Viewer
4
63
(1) Menu Area Display Switch ButtonSwitches between displaying and hiding the menu bar.
(2) [Reconnect] Button Reconnects to the camera. Can be operated when the Viewer is not connected to the camera.
(3) Full Screen Mode Switch Button Returns the video display area to the regular view.
(4) [Video and Audio] Menu Configures the video displa y size and audio transmission/reception of the Viewer.
(A) Video Size Sets the reception video size from the camera (P. 61).
(B) H.264 Selects...

64
Set a capture mode suited to the brightness of the camera installation environment (P. 71).
(J) Clear IR Mode Selects whether to enable/disable the clear IR mode that reduces shade and  heat shimmer in far 
backgrounds (P. 71).
(K) Switch Area Zoom/Drag to Move  Switch between Area Zoom and Drag to Move functio ns for dragging in the video display area (P. 67).
(L) Pan/Tilt/Zoom If you enable this button (make it purple), the pan/ti lt/zoom sliders are displayed on the screen to perform 
operations...

Camera Viewer
4
65
This section describes the operations and configuration required for using the came ra, such as obtaining camera control 
privileges, setting the angle and focus.
Obtaining Camera Control Privileges
To use the camera, you must obtain control privileges with the Viewer.
If you have not yet obtained camera co ntrol privileges, click the [Obtain/Release Camera Control Privileges] button.
You will obtain control privileges and be  able to use the buttons on the Viewer.
The center of the...

66
Using Pan/Tilt/Zoom
You can pan, tilt and zoom the camera to set the camera angle.
Note
 Camera operations using clicking and dragging,  do not offer a high precision control of the camera.
 The administrator can operate the camera regardless of view rest rictions. Authorized and guest users can only operate the came ra 
within the restricted view.
 Clicking on the Video Displa y Area or Use the Sliders
Moving by Clicking on the Video Display Area
If you click in the video display area, the camera...

Camera Viewer
4
67
Also, if you set [Camera] > [Camera] > [Camera Control] > [Enhanced Digital Zoom] to [Enable] on the Setting Page 
(P. 105), the enhanced digital zoom range (blue) is di splayed on the zoom slider and enhanced digital zoom 
becomes available.
Enhanced digital zoom performs digital zooming within a r ange where poor image quality is not apparent, according 
to the received video size.
Note
 The zoom magnification for enhanced digital zo om is limited to the video size set by the user...

68
out to.
When operating in Area Zoom mode, an icon (zoom in:  ; zoom out:  ) is displayed in the frame.
To stop Area Zoom, right-click with the left mouse button held down, and the frame is displayed.
When dragged left-to-right, the camera will zoom in  until the area in the frame fills the video display area.
When dragged right-to-left, the camera will zoom  out, centered around the area in the frame.
Using Drag to Move to Change the Camera Angle
The camera angle will move in the direction of the...

Camera Viewer
4
69
(1) [Pan/Tilt]The camera angle will move in the direction of each a rrow. Movement will continue while you hold the button 
down, and stop when you release it.
Click the center button to move the camera angle to the mi dpoint of the pan/tilt range of motion. However, if a 
view restriction is set (P. 123) and th e midpoint is outside the restrict view area, the camera angle moves to the 
edge of the restrict view area.
(2) Pan/Tilt Speed Set the operation speed by  the [Pan/Tilt]...

70
Move or Zoom by Dragging
Click inside the frame and drag it to pan and tilt the camera.
If you click and drag outside the frame, a new frame will be drawn. The camera  will pan/tilt/zoom to capture the 
area in the frame.
If you drag an edge of the frame to  change its size, the camera will zoom in  or out to capture the area in the 
frame.
Move by Clicking
If you click outside the frame, the frame will move and  center on that point, panning and tilting the camera.
Adjusting Video
Open   [Camera...