Canon network camera VBH651V User Manual

Before Use
1
21
RM-64/RM-25/RM-9
This software allows network cameras to be used for mu ltipoint surveillance, and for displaying, recording and 
playing back videos from the camera.
The number of cameras that can be registered with RM-64/RM-25/RM-9 varies: 64, 25, or 9 cameras respectively can 
be registered. By using multiple Storage Servers, you  can construct a surveillance system supporting up to 512 
cameras.
Note
Licenses for upgrading from  RM-9 to RM-25 or RM-64, and from RM-25 to RM-64 are...

22
For the latest information on this product (firmware and included software, user manual, operating environment, etc.), 
please refer to the Canon website.
The Viewer and Setting Page
Operating Environment
CPU (Recommended) Intel Core i7-2600 or higher
Graphics Board 
(Recommended)Not specified
Memory (Recommended)
2 GB or higher
Viewer Display 
(Recommended)1920 x 1080 or higher
OSWindows Vista Ultimate/Business/Ente
rprise/Home Premium SP2 32/64-bit
Windows 7 Ultimate/Professional/Ent erprise/Home...

Before Use
1
23
Verified Mobile Devices (Settings Page, Viewer)
– As of February 2016
Note
 For details on the operating environment of the Camera Management Tool, please refer to “Camera Management Tool User Manual”.
 For information on the operating environment of the Recorded Vi deo Utility, please refer to “Recorded Video Utility User Manual”.
Surface 3OS:
Windows 8.1 Professional/Windows 8.1 Enterprise 64-bit*
Windows 10 Pro/Windows 10 Enterprise/Windo
ws 10 Education/Windows 10 Home 64-bit
* Can...

24
Step 1 Preparing to Install the camera
Make preparations to use the camera via a network.
Install the necessary software “Installing Software” (P. 28)
Check/configure the computer and web browser security settings
 “Checking/Configuring Security Settings” (P. 31)
Use the Camera Management Tool to  configure initial camera settings.
  “Configuring Initial Camera Settings” (P. 36)
Step 2 Checking the Camera Connection
Access the camera with a computer to ens ure preparations have been properly...

Before Use
1
25
Step 5 Using the Camera Viewers
Operate the camera while viewing the video in the Viewer. “Camera Viewer” (P. 49)
Step 6 Adjusting Advanced Settings According to its Use
Advanced settings can be made in the Setting Menu, such as for 
camera control and security, according to how the camera will 
be used.
 “Setting Page” (P. 85)
Troubleshooting
Please refer to “Appendix” (P. 213), in  case of error messages or problems.
Camera Viewer
Setting Page 

26 

Chapter
 
Camera Setup
To prepare the camera for use, install the necessary software on the computer, and configuring the initial 
settings for web browser security and the camera.
When initial settings are complete, access the camera and check if video can be viewed. 

28
Use the setup CD-ROM included with the camera to install the necessary software.
Necessary Software
You will need the following software:
 Camera Management Tool (P. 36)
 Recorded Video Utility
 .NET Framework 3.5 SP1/.NET Framework 4.5 (u nnecessary if already installed on computer)
Note
If .NET Framework 3.5 SP1/.NET Framework 4.5 is not installed on the computer, the installer will automatically install the version 
appropriate for the version of Inte rnet Explorer used on the computer.
Software...

Camera Setup
2
29
If you select [Easy Installation], confirm the software that will be installed and click [Next].
If you select [Custom Installation], select the  software to be installed and click [Next].
The User License Agreement screen is displayed.
4Select the installation method.
5Confirm or select the software that will be installed. 

30
Installation starts.
The Camera Management Tool icon and Recorded Video Utility icon will be displayed on the desktop.
6Read through the user license agreement and click [Yes] if you accept it.
7Click [Exit] or [Reboot].