Canon network camera VBH651V User Manual
Here you can view all the pages of manual Canon network camera VBH651V User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
Camera Setup
2
41
The [Initial Settings] top page will be displayed.
After the camera restarts, the Setting Page is displayed and you can configure the settings.
1Launch the web browser.
2Enter 192.168.100.1, and press the Enter key.
3Enter the administrator name and administrator password, and click [Apply].](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-40.png "Page 41
Camera Setup
2
41
The [Initial Settings] top page will be displayed.
After the camera restarts, the Setting Page is displayed and you can configure the settings.
1Launch the web browser.
2Enter 192.168.100.1, and press the Enter key.
3Enter the administrator name and administrator password, and click [Apply].")
Camera Setup 2 41 The [Initial Settings] top page will be displayed. After the camera restarts, the Setting Page is displayed and you can configure the settings. 1Launch the web browser. 2Enter 192.168.100.1, and press the Enter key. 3Enter the administrator name and administrator password, and click [Apply].
Page 42
42
Page 43
![Page 43
Chapter
Setting the Camera Angle
After installing the camera, set the camera angle while checking the video displayed in [Camera] > [Camera
Angle] on the Setting Page.
H651](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-42.png "Page 43
Chapter
Setting the Camera Angle
After installing the camera, set the camera angle while checking the video displayed in [Camera] > [Camera
Angle] on the Setting Page.
H651")
Chapter Setting the Camera Angle After installing the camera, set the camera angle while checking the video displayed in [Camera] > [Camera Angle] on the Setting Page. H651
Page 44
![Page 44
44
Adjust the camera angle when installing the camera or after changing the installation location.
The camera angle settings are configured by accessing the Setting Page (P. 86).
Step 1 Configuring the Camera Before Setting the Camera Angle
Set the digital zoom, image stabilizer, and image flip, which affect the camera angle.
[Digital Zoom] (P. 105) and [Image Stabilizer] (P. 105) in [C amera] > [Camera] > [Camera Control] on the Setting Page.
[Image Flip] (P. 107) in [Camera] > [Camera] >...](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-43.png "Page 44
44
Adjust the camera angle when installing the camera or after changing the installation location.
The camera angle settings are configured by accessing the Setting Page (P. 86).
Step 1 Configuring the Camera Before Setting the Camera Angle
Set the digital zoom, image stabilizer, and image flip, which affect the camera angle.
[Digital Zoom] (P. 105) and [Image Stabilizer] (P. 105) in [C amera] > [Camera] > [Camera Control] on the Setting Page.
[Image Flip] (P. 107) in [Camera] > [Camera] >...")
44 Adjust the camera angle when installing the camera or after changing the installation location. The camera angle settings are configured by accessing the Setting Page (P. 86). Step 1 Configuring the Camera Before Setting the Camera Angle Set the digital zoom, image stabilizer, and image flip, which affect the camera angle. [Digital Zoom] (P. 105) and [Image Stabilizer] (P. 105) in [C amera] > [Camera] > [Camera Control] on the Setting Page. [Image Flip] (P. 107) in [Camera] > [Camera] >...
Page 45
![Page 45
Setting the Camera Angle
3
45
Select [Camera] > [Camera Angle] on the Setting Page to set pan, tilt, zoom, rotation and focus.
Note
[Camera Angle] can be also launched from the Camera Management Tool. For details, please refer to “Camera Management Tool User
Manual”.
Camera Angle Screen Composition
(1) Video Display Area
Camera video is displayed here.
(2) Control Assist Display Displays the available directions for the camera with dotted lines when performing pan/tilt operations.
(3) [Pan] Buttons...](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-44.png "Page 45
Setting the Camera Angle
3
45
Select [Camera] > [Camera Angle] on the Setting Page to set pan, tilt, zoom, rotation and focus.
Note
[Camera Angle] can be also launched from the Camera Management Tool. For details, please refer to “Camera Management Tool User
Manual”.
Camera Angle Screen Composition
(1) Video Display Area
Camera video is displayed here.
(2) Control Assist Display Displays the available directions for the camera with dotted lines when performing pan/tilt operations.
(3) [Pan] Buttons...")
Setting the Camera Angle 3 45 Select [Camera] > [Camera Angle] on the Setting Page to set pan, tilt, zoom, rotation and focus. Note [Camera Angle] can be also launched from the Camera Management Tool. For details, please refer to “Camera Management Tool User Manual”. Camera Angle Screen Composition (1) Video Display Area Camera video is displayed here. (2) Control Assist Display Displays the available directions for the camera with dotted lines when performing pan/tilt operations. (3) [Pan] Buttons...
Page 46
![Page 46
46
(9) Control Assist CorrectionIf you click [Exec] when the control assistance display does not match the actual camera angle, an operation is
performed which confirms the actual camera angle, and the position of the control assistance display is
automatically corrected.
Correction takes approximately one minute.
(10) [Camera Settings] Operate the focus (P. 109).
(11) Digital Zoom Range Displayed when [Digital Zoom] is set to [Enable] in [Camera] > [Camera] > [Camera Control] on the Setting
Page....](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-45.png "Page 46
46
(9) Control Assist CorrectionIf you click [Exec] when the control assistance display does not match the actual camera angle, an operation is
performed which confirms the actual camera angle, and the position of the control assistance display is
automatically corrected.
Correction takes approximately one minute.
(10) [Camera Settings] Operate the focus (P. 109).
(11) Digital Zoom Range Displayed when [Digital Zoom] is set to [Enable] in [Camera] > [Camera] > [Camera Control] on the Setting
Page....")
46 (9) Control Assist CorrectionIf you click [Exec] when the control assistance display does not match the actual camera angle, an operation is performed which confirms the actual camera angle, and the position of the control assistance display is automatically corrected. Correction takes approximately one minute. (10) [Camera Settings] Operate the focus (P. 109). (11) Digital Zoom Range Displayed when [Digital Zoom] is set to [Enable] in [Camera] > [Camera] > [Camera Control] on the Setting Page....
Page 47
![Page 47
Setting the Camera Angle
3
47
To operate the camera angle using the [Rotation] slider, click the slider or drag the tab to adjust the camera to an
angle where the subject in the video is horizontal.
Setting Camera Angle by Clicking Video
If you click anywhere in the video display area, the camera angle will change to center on that location.
If you click outside the pan or tilt r ange, however, the camera angle will only change for the one which is within its
range.
Note
If the camera moves...](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-46.png "Page 47
Setting the Camera Angle
3
47
To operate the camera angle using the [Rotation] slider, click the slider or drag the tab to adjust the camera to an
angle where the subject in the video is horizontal.
Setting Camera Angle by Clicking Video
If you click anywhere in the video display area, the camera angle will change to center on that location.
If you click outside the pan or tilt r ange, however, the camera angle will only change for the one which is within its
range.
Note
If the camera moves...")
Setting the Camera Angle 3 47 To operate the camera angle using the [Rotation] slider, click the slider or drag the tab to adjust the camera to an angle where the subject in the video is horizontal. Setting Camera Angle by Clicking Video If you click anywhere in the video display area, the camera angle will change to center on that location. If you click outside the pan or tilt r ange, however, the camera angle will only change for the one which is within its range. Note If the camera moves...
Page 48
![Page 48
48
[Focus]
Selects the focus.[Auto]
Automatically adjusts the focus.
[Manual]
You can click and hold the [Near] and [Far] buttons in [Adjust Focus] to adjust the focus in the near and far directions.
When you click [Exec] in [One-shot AF], the camera wi ll focus once using autofocus and then switch to manual mode.
[Fixed at infinity]
Fixes the focus at infinity, where camera focus adjustment is not required.
Note
If you click [Apply] to apply changed camera angle settings, the zoom and focus...](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-47.png "Page 48
48
[Focus]
Selects the focus.[Auto]
Automatically adjusts the focus.
[Manual]
You can click and hold the [Near] and [Far] buttons in [Adjust Focus] to adjust the focus in the near and far directions.
When you click [Exec] in [One-shot AF], the camera wi ll focus once using autofocus and then switch to manual mode.
[Fixed at infinity]
Fixes the focus at infinity, where camera focus adjustment is not required.
Note
If you click [Apply] to apply changed camera angle settings, the zoom and focus...")
48 [Focus] Selects the focus.[Auto] Automatically adjusts the focus. [Manual] You can click and hold the [Near] and [Far] buttons in [Adjust Focus] to adjust the focus in the near and far directions. When you click [Exec] in [One-shot AF], the camera wi ll focus once using autofocus and then switch to manual mode. [Fixed at infinity] Fixes the focus at infinity, where camera focus adjustment is not required. Note If you click [Apply] to apply changed camera angle settings, the zoom and focus...
Page 49
Chapter Camera Viewer Use the web browser to access the Viewer in the camera to perform camera operations, view live video, and check the status of events.
Page 50
50 You can start the Camera Viewer to switch users and check/configure the status of the camera as well as the video display. Note If you open another window or tab to access the camera while an aut henticated web page is displayed, the authentication information of the displayed web page may be discarded. In this case, enter the authentication information again. Launching the Camera Viewer You can enter the IP address set with the Camera Managemen t Tool (P. 38) directly into a web browser to display...