Canon network camera VBH651V User Manual
Here you can view all the pages of manual Canon network camera VBH651V User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 31
Camera Setup 2 31 Camera configuration and operation may be blocked, depending on the security functions of the operating system and web browser. Change or check security settings beforehand. Checking Firewall Settings To use the Camera Management Tool on computers where Windows Firewall is enabled, you may need to add the Camera Management Tool as an application a llowed to communicate via the firewall. Note Even if you do not perform the following steps, you can still ad d the Camera Management Tool...
Page 32
![Page 32
32
Adding the Camera IP Address as a Trusted Site
When the security level for internet sites and intranet sites is se t to [High], it is necessary to add the IP address of the
camera to the list of trusted sites.
Note
Set the camera IP address with the Camera Management Tool (P. 38).
3Click [Change settings] > [Allow another app].
4Select [Camera Management Tool] and click [Add].
1Click [Network and Internet] > [Int ernet Options] in [Control Panel].
2Click the [Security] tab.](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-31.png "Page 32
32
Adding the Camera IP Address as a Trusted Site
When the security level for internet sites and intranet sites is se t to [High], it is necessary to add the IP address of the
camera to the list of trusted sites.
Note
Set the camera IP address with the Camera Management Tool (P. 38).
3Click [Change settings] > [Allow another app].
4Select [Camera Management Tool] and click [Add].
1Click [Network and Internet] > [Int ernet Options] in [Control Panel].
2Click the [Security] tab.")
32 Adding the Camera IP Address as a Trusted Site When the security level for internet sites and intranet sites is se t to [High], it is necessary to add the IP address of the camera to the list of trusted sites. Note Set the camera IP address with the Camera Management Tool (P. 38). 3Click [Change settings] > [Allow another app]. 4Select [Camera Management Tool] and click [Add]. 1Click [Network and Internet] > [Int ernet Options] in [Control Panel]. 2Click the [Security] tab.
Page 33
![Page 33
Camera Setup
2
33
The [Trusted sites] dialog box is displayed.
Note
Clear the [Require server verification (https:) for all sites in this zone] checkbox if it is selected.
The camera’s IP address will be added to the [Websites] list.
You can add IP addresses for multiple cameras by using a wildcard (*) when entering the IP address.
For example, if you enter “192.160.1.*”, all cameras that share the “192.160.1” portion of the address will be added as trusted
sites.
Settings When Using Windows...](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-32.png "Page 33
Camera Setup
2
33
The [Trusted sites] dialog box is displayed.
Note
Clear the [Require server verification (https:) for all sites in this zone] checkbox if it is selected.
The camera’s IP address will be added to the [Websites] list.
You can add IP addresses for multiple cameras by using a wildcard (*) when entering the IP address.
For example, if you enter “192.160.1.*”, all cameras that share the “192.160.1” portion of the address will be added as trusted
sites.
Settings When Using Windows...")
Camera Setup 2 33 The [Trusted sites] dialog box is displayed. Note Clear the [Require server verification (https:) for all sites in this zone] checkbox if it is selected. The camera’s IP address will be added to the [Websites] list. You can add IP addresses for multiple cameras by using a wildcard (*) when entering the IP address. For example, if you enter “192.160.1.*”, all cameras that share the “192.160.1” portion of the address will be added as trusted sites. Settings When Using Windows...
Page 34
34 Security Settings When Using an SSL/TLS Connection When an SSL/TLS connection to the camera is made from a web browser (Internet Explorer 9/10/11) in Windows Server 2008/Windows Server 2012, the fo llowing operations may cause the blocked content dialog box to display, and prevent further operation. The launching of the Viewer and the Setting Page Audio reception from the Viewer This occurs when Internet Explorer Enhanc ed Security Configuration (IE ESC) is enabled in Internet Explorer 9/10/11....
Page 35
![Page 35
Camera Setup
2
35
The [Audio Service Not Running] dialog box is displayed.
The [Sound] dialog box is displayed.
If no audio device is installed, refer to your computer manual.
2Click [Sound].
3Click [Yes].
4Click the [Playback] tab to confirm that an audio device has been installed.](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-34.png "Page 35
Camera Setup
2
35
The [Audio Service Not Running] dialog box is displayed.
The [Sound] dialog box is displayed.
If no audio device is installed, refer to your computer manual.
2Click [Sound].
3Click [Yes].
4Click the [Playback] tab to confirm that an audio device has been installed.")
Camera Setup 2 35 The [Audio Service Not Running] dialog box is displayed. The [Sound] dialog box is displayed. If no audio device is installed, refer to your computer manual. 2Click [Sound]. 3Click [Yes]. 4Click the [Playback] tab to confirm that an audio device has been installed.
Page 36
36 To use a camera, it is necessary to first set the administrator account for the camera, then configure the network settings, and then connect the camera and computer via the network. Use the Camera Management Tool to configure these settings. This section describes the procedure for configuring the initial settings for a camera with the factory default settings, such as the administrator account and the network settings using the Camera Management Tool. Note For details on using the Camera...
Page 37
![Page 37
Camera Setup
2
37
The [Search Cameras] dialog box is displayed.
Detected cameras will be displayed in the camera list.
When a dialog indicating that a camera requiring an administrator to be registered has been found, click [OK].
Registering the Administrator Account
Register the administrator account for cameras with [Admin Required] displayed for [Connection Status].
The [Register Administrator Account] dialog box is displayed.
1Click the [Search Camera] icon.
2Click [Search].
1Select a camera in the...](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-36.png "Page 37
Camera Setup
2
37
The [Search Cameras] dialog box is displayed.
Detected cameras will be displayed in the camera list.
When a dialog indicating that a camera requiring an administrator to be registered has been found, click [OK].
Registering the Administrator Account
Register the administrator account for cameras with [Admin Required] displayed for [Connection Status].
The [Register Administrator Account] dialog box is displayed.
1Click the [Search Camera] icon.
2Click [Search].
1Select a camera in the...")
Camera Setup 2 37 The [Search Cameras] dialog box is displayed. Detected cameras will be displayed in the camera list. When a dialog indicating that a camera requiring an administrator to be registered has been found, click [OK]. Registering the Administrator Account Register the administrator account for cameras with [Admin Required] displayed for [Connection Status]. The [Register Administrator Account] dialog box is displayed. 1Click the [Search Camera] icon. 2Click [Search]. 1Select a camera in the...
Page 38
![Page 38
38
(1) [Administrator Name]Enter the administrator name using only alphanu meric characters, hyphens, and underscores.
(2) [Administrator Password] Enter the Admini strator Password.
(3) [Confirm Administrator Password] Enter the administrator pass word again for confirmation.
A dialog confirming whether you want to restart the camera is displayed.
Click [OK] to restart the camera.
[Connection Status] will change to [Conne ctable] after the camera is restarted.
Setting up Networks
Configure the network...](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-37.png "Page 38
38
(1) [Administrator Name]Enter the administrator name using only alphanu meric characters, hyphens, and underscores.
(2) [Administrator Password] Enter the Admini strator Password.
(3) [Confirm Administrator Password] Enter the administrator pass word again for confirmation.
A dialog confirming whether you want to restart the camera is displayed.
Click [OK] to restart the camera.
[Connection Status] will change to [Conne ctable] after the camera is restarted.
Setting up Networks
Configure the network...")
38 (1) [Administrator Name]Enter the administrator name using only alphanu meric characters, hyphens, and underscores. (2) [Administrator Password] Enter the Admini strator Password. (3) [Confirm Administrator Password] Enter the administrator pass word again for confirmation. A dialog confirming whether you want to restart the camera is displayed. Click [OK] to restart the camera. [Connection Status] will change to [Conne ctable] after the camera is restarted. Setting up Networks Configure the network...
Page 39
![Page 39
Camera Setup
2
39
Adding the Camera’s IP Address to Trusted Sites
When the security level for internet sites and intranet sites is set to [High] in Internet Explorer, it is necessary to add the IP
address of the camera to the list of trusted sites.
A confirmation message is displayed.
The camera will be added as a trus ted site for Internet Explorer.
Note
The added information will be loaded when Internet Explorer is re started. Close and restart Internet Explorer if it is running.
Checking the Video...](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-38.png "Page 39
Camera Setup
2
39
Adding the Camera’s IP Address to Trusted Sites
When the security level for internet sites and intranet sites is set to [High] in Internet Explorer, it is necessary to add the IP
address of the camera to the list of trusted sites.
A confirmation message is displayed.
The camera will be added as a trus ted site for Internet Explorer.
Note
The added information will be loaded when Internet Explorer is re started. Close and restart Internet Explorer if it is running.
Checking the Video...")
Camera Setup 2 39 Adding the Camera’s IP Address to Trusted Sites When the security level for internet sites and intranet sites is set to [High] in Internet Explorer, it is necessary to add the IP address of the camera to the list of trusted sites. A confirmation message is displayed. The camera will be added as a trus ted site for Internet Explorer. Note The added information will be loaded when Internet Explorer is re started. Close and restart Internet Explorer if it is running. Checking the Video...
Page 40
![Page 40
40
The authentication screen for the Viewer is displayed (P. 51).
The web browser starts and the Camera Viewer is displayed.
Note
The web browser only starts when [Connectable] or [Connectable (error)] is displayed for [Connection Status].
Accessing the Camera from Web Browser
Cameras with the factory default settings are configured to obtain an IP address from the DHCP server. However, you can
access a camera connected to a network env ironment without a response from the DHCP server by entering a...](http://img.usermanuals.tech/thumb/14/1383/w300_network-camera-vbh651v-1478296141_d-39.png "Page 40
40
The authentication screen for the Viewer is displayed (P. 51).
The web browser starts and the Camera Viewer is displayed.
Note
The web browser only starts when [Connectable] or [Connectable (error)] is displayed for [Connection Status].
Accessing the Camera from Web Browser
Cameras with the factory default settings are configured to obtain an IP address from the DHCP server. However, you can
access a camera connected to a network env ironment without a response from the DHCP server by entering a...")
40 The authentication screen for the Viewer is displayed (P. 51). The web browser starts and the Camera Viewer is displayed. Note The web browser only starts when [Connectable] or [Connectable (error)] is displayed for [Connection Status]. Accessing the Camera from Web Browser Cameras with the factory default settings are configured to obtain an IP address from the DHCP server. However, you can access a camera connected to a network env ironment without a response from the DHCP server by entering a...