Canon network camera VBC60 User Manual

2-15
View Restriction Setting Tool
VBAdmin Tools
Display Screens of View Restriction Setting Tool
(1) [Load view restriction settings] buttonLoad the current view restriction settings of the camera. 
(2) [Save view restriction settings] button Save the view restriction settings set/applied using this tool, in the camera. 
If view restrictions have been set, be sure to save the settings in the camera using the [
Save 
view restriction settings] button. 
(3) Panorama Preview The panorama images registered...

2-16
View Restriction Setting Tool
(4) [Model]The model of the connected camera is displayed.
(5) [Apply the view restriction] To use view restrictions, select this check box.
(6) View restriction setting entry boxes and [Get value] button  You can enter a value in each view restriction setting entry box to change the applicable 
setting. 
You can load the current camera angle into each setting by clicking the [ Get value] button. 
● View restriction settings
[Upper limit ] ...Top limit of the view...

2-17
View Restriction Setting Tool
VBAdmin Tools
Setting View Restrictions 
You can set view restrictions by entering values in the view restriction setting entry boxes, or by 
changing the current settings in the view restriction preview frame or from the camera angle in 
Admin Viewer. Select appropriate settings according to the environment in which the camera is 
operated or based on your preference. 
„Changing Settings from View Restriction Preview Frame 
Use the preview frame on the panorama image...

2-18
View Restriction Setting Tool
3. Click [Apply].Confirm on the status list that the settings have been applied correctly, and then click the 
[Save view restriction settings ] button to save the settings in the camera. 
„Changing Settings from Camera Angle in Admin Viewer 
Launch Admin Viewer and set each view restriction while checking the position on the image. 
How to Set
1. Select the [Apply the view restriction] check box. 
2. Click the [Admin Viewer] button to launch Admin Viewer.
User...

2-19
View Restriction Setting Tool
VBAdmin Tools
4. Operate the camera to adjust the top edge, bottom edge, left edge, right edge, telescopic or wide angle to desired positions, and then click each [Get value] button.
The loaded view restriction can be checked in the view restriction setting entry box or view 
restriction preview frame. 
5. Click [Apply]. Check the status list to make sure the settings have been applied correctly, and then click the 
[Save view restriction settings ] button to save the...

2-20
View Restriction Setting Tool
Tip
zEven when view restrictions are set, an area ou tside the view restriction may still appear 
momentarily when the camera is  controlled near the boundary of the view restriction. 
z To cancel the view restrictions, clear the [ Apply the view restriction] check box and then 
click the [Apply ] button, followed by the [ Save view restriction settings ] button.
z If the setting fields are cleared while the [ Apply the view restriction] check box is selected, 
the...

2-21
View Restriction Setting Tool
VBAdmin Tools
zThe pan and tilt ranges vary depending on the zoom ratio (view angle).
z If the view restriction will be exceeded as a result of controlling the zoom toward the wide-
angle side, the camera will first pan and tilt  to a position where the maximum wide-angle 
zoom will be within the viewing restriction area. Wide-angle zoom control will then be 
enabled within the view restriction area.
z Reducing the view restriction may also reduce the zoom range. 
When...

2-22
Preset Setting Tool
A tool that lets you set presets and the home position in a more visual, easy manner. You can 
specify a desired setting with the mouse by referring to the preview in the panorama mode. You 
can also set [Preset Tour] whereby the camera goes around and monitors multiple presets. 
Set preset tour after the presets 
have been set.  Preset Setting Tool
Reflecting in VB-C60 Viewer
Executing preset tour  

2-23
Preset Setting Tool
VBAdmin Tools
Display Screens of Preset Setting Tool
The display screens of Preset Setting Tool are divided into Preset Setting Area and Preset Tour 
Setting Area. In the Preset Setting Area, up to 20 presets and the home position are set while 
referring to the panorama preview. In the Preset Tour Setting Area, Preset Tour is set whereby 
the camera goes around and monitors multiple presets. 
The following explains the display screen Preset Setting Area.
For the Preset Tour...

2-24
Preset Setting Tool
(3) Panorama Preview The panorama images registered in the camera. are displayed. Also, the preset preview 
frame (yellow) recreating the preset settings is displayed, where you can drag to resize/move 
the frame and reflect the new frame in the preset settings. 
(4) [Preset] Select the preset or home position you want to set. 
(5) [Not shown in viewers] If presets are used from VB-C60 Viewer, clear this check box. If [ Home position] was selected 
in [ Preset ], this setting is...