Canon network camera VBC60 User Manual

3-15
How to Operate VB-C60 Viewer
VB-C60 Viewer
„Changing the camera angle in the panorama display area 
Moving by clicking 
Clicking on the panorama window moves the pan/tilt positions until the clicked location 
becomes the center.
Moving by dragging 
Drag the inside of the yellow frame on the panorama window to move the frame, and the pan/
tilt positions will move so that the area inside the frame will be captured. 
Tip
zCamera controls based on clicking the VB-C60 Viewer screen are not precise.
z If...

3-16
How to Operate VB-C60 Viewer
„Changing the Camera Zoom Ratio
How to Operate
Move the knob on the scroll bar for zoom in/out.
The camera zoom ratio will change according to the knob position on the scroll bar. You can 
also move the knob by clicking a blank point on the scroll bar.
Click the setting bar for zoom.
The camera zoom ratio will change according to the relative vertical position of the clicked 
point. You can also operate the zoom by clicking the icons at the top and bottom of the zoom...

3-17
How to Operate VB-C60 Viewer
VB-C60 Viewer
„Changing the zoom ratio in the panorama display area 
Changing by dragging
Drag the yellow frame line on the panorama window to change the frame size, and the zoom 
ratio will change so that the area inside the new frame will be captured. 
„Using Presets 
You can control the camera using presets already registered in the camera (  P. 2-22).
How to Operate
1. Click the [Preset] selection box to display a preset list. 
2. Selecting a desired preset from the...

3-18
How to Operate VB-C60 Viewer
„Compensating Backlight
This control is effective when the image is dark due to backlight.
How to Operate
Clicking [Backlight Compensation] brightens  the image that was previously dark due to 
backlight.
Clicking the button again cancels backlight compensation.
Setting Video and Audio
You can change the video capture size, change the video display screen, show video in the full-
screen mode, pause video, reconnect the camera and set audio reception.
Admin ViewerVB...

3-19
How to Operate VB-C60 Viewer
VB-C60 Viewer
„Changing the Video Capture Size
You can set a desired resolution for video received from the camera. Select from [ 160x120], 
[320x240 ] and [640x480 ].
„Changing the Video Display Screen
You can change the video display screen. Select from [ 160x120], [320x240] and [ 640x480].
„Viewing Video in the Full-screen Mode (Admin Viewer Only)
You can show video over the entire display. Click this button, and a new window will open to show 
video in the...

3-20
How to Operate VB-C60 Viewer
„Saving the Paused Image
How to Operate
* Although the sample screen is that of Admin Viewer, you can also save the image in VB Viewer  using the same operation.
„ Reconnecting
This function is used to connect to the camera again.
To reconnect the camera, click this button.
Tip
When the control is paused, the display size setting, Pause/Resume button, Control for Admin 
button and all functions of Control for Admin excluding the following items are grayed out. 


These...

3-21
How to Operate VB-C60 Viewer
VB-C60 Viewer
„Receiving Audio 
You can receive audio through the microphone attached to the camera.
Click this button to receive audio.
Displaying Information
Viewer information, warning messages, etc., are shown.
„Information Messages
An information message is indicated by a blue icon.
An information message appears when a camera operation has been successful.
Help messages on various buttons, pull-down lists, etc., and pan, tilt and zoom information, 
frame rate...

3-22
How to Operate VB-C60 Viewer
„Warning Messages
A warning message is indicated by a yellow icon.
If an unsupported web browser is used or audio reception stops, a message will be 
displayed to alert the user.
„Error Messages
An error message is indicated by an orange icon.
An error message will be displayed if the viewer generates an error.
Note
If the Image Stabilizer  is turned on, the actual viewing angle of image display becomes 
smaller than the viewing angle displayed in the information...

3-23
VB-C60 Viewer
Performing Operations and Settings as the 
Administrator
The operations and settings that can only be performed in the Admin Viewer are explained.
Opening Control for Admin
How to Operate
1. Click Obtain/release Camera Control to obtain the control privileges.
2. Click [Control for Admin].
3. The Control for Admin appears.
* Control for Admin can be opened even when camera control privileges have not been acquired. However, all items in the Control for Admin operation area are grayed...

3-24
Performing Operations and Settings as the Administrator
Operating the External Device Output 
You can operate the external device output and display the current output status using an icon. 
The [ON]/[OFF ] status can be switched by clicking this icon.
Example:
Top: Output OFF
Bottom: Output ON
Displaying the External Device Input Status
You can check the status of external device input and display it using an icon. When the external 
device receives a contact input signal, the input will turn ON...