Canon network camera VBC60 User Manual

5-7
Appendix
List of Log Messages
Log Messages on the VB-C60
Log messages are classified into the following six types.
„Application (camera) messages
A030 Startup and shutdown of WebView Livescope Client [info]
A031 Transmitted video data size [info]
A040 Cause of rebooting [info]
CategoryLevelCodeFault level
alert Error 5xx Hardware-level failure (System operations will stop) crit Error 4xx Software-level failure (Task operations will stop)
err  Error 3xx Operational error (Operations will continue)...

5-8
List of Log MessagesA101 Invalid user name [notice]
A102 Invalid password [notice]
A111 Invalid host [notice]
A160 Recovery of pan/tilt subsystem [notice]
A201 Registered panorama image error [warning]
A250 Control error during camera initialization [warning]
A260 Slipped pan/tilt position [warning] Description user  not found (A101)
Meaning The camera was accessed by an unauthorized user.
Description user  password mismatch (A102) Meaning The password is invalid.
Description host  access denied...

5-9
List of Log Messages
Appendix
A330 Video input error [err]
 A350 Camera control system [err]
A450 Camera initialization failed [crit]
A460 Stopping of pan/tilt subsystem function [crit] 
„Application (uploader) messages
A004 Starting and stopping of uploader [info]Description video input timeout - resetting (A330)
Meaning The video input has been reset because video input stopped.
CountermeasureIf the error occurs repeatedly, the camera is damaged. Contact our 
Customer Service Center.
Description...

5-10
List of Log MessagesA120 Resolution of upload destination name failed [notice]
A121 Connection to upload destination failed [notice]
A122 Connection to upload destination failed [notice]
A130 Stream recording buffer recovered [notice]
A134 Invalid upload setting (FTP/HTTP mode) [notice]
A135 Invalid upload setting (FTP PORT/PASV mode) [notice]
A136 Invalid upload setting (HTTP notification only/image mode) [notice]Description uploader cannot resolve the server name (A120)
Meaning The name of the...

5-11
List of Log Messages
Appendix
A137 Invalid upload setting (E-mail notification) [notice]
A138 Invalid upload setting (E-mail notification authentication mode) [notice]
A220 Video input warning detected [warning]
A230 Video input warning detected [warning]
A270 Upload image buffer overflowed [warning]
A271 E-mail communication buffer overflowed [warning]Description mode invalid. uploader set  forcibly (A137)
Meaning The e-mail notification setting is invalid. E-mail notification was forcibly...

5-12
List of Log MessagesA272 Upload communication buffer overflowed [warning]
A321 Video control command failed [err]
A420 Video input initialization failed [crit]
A421 Video control command failed [crit]
A422 Video input frozen [crit]
A423 Video input error detected [crit]Description ftp/http queue is full (A272)
Meaning Upload data overflowed from the communication buffer.
CountermeasureMake adjustments to reduce the number of event occurrences. Also adjust 
the upload quality, image size and frame...

5-13
List of Log Messages
Appendix
A470 Uploader initialization failed [crit]
„Application (audio server) messages
B001 Starting and shutdown of audio server [info]
B011 Audio client connected [info]
B012 Audio client closed [info]
B101 Error request received [notice]Description uploader initialization failure - %1 (A470)
%1 Error number
Meaning The uploader could not be initialized.
CountermeasureIf the problem persists after rebooting the camera, the camera is faulty.
Description %1 wvaudio (B001) %1...

5-14
List of Log MessagesB102 Client connection denied [notice]
B103 Client forcibly disconnected [notice]
B301 Audio sending device error [err]
B401 Audio device initialization failed [crit]Description %1 request denied[%2] (B102)
%1 Client host IP address
%2 Denial type (41 | 43 | ...)
Meaning Client connection was denied due to an authentication error (41), 
insufficient resource (43), specification of unsupported codec (45), 
specification of unsupported stream (46), host access restriction (48), too...

5-15
List of Log Messages
Appendix
B402 Audio server initialization failed [crit]
B403 Settings change failed [crit]
„HTTP Server Messages
H143 User name specification error [notice]
H144 Password specification error [notice]
H145 Connection denied due to host access limitation [notice]Description wvaudio initialization error[%1] (B402)
%1 Error number
Meaning The audio server could not be initialized. The audio server stops.
CountermeasureIf the problem persists after rebooting, the camera is faulty....

5-16
List of Log Messages
„ System Messages
S004 Starting and stopping of system [info]
S005 System settings changed [info]
S240 Camera error [warning]
S306 Error on saving settings [err]
S307 Error on saving settings [err]Description %1 webview (S004)
%1 Starting or stopping.
Meaning The video server (webview) has started or stopped.
Description (vbadmin.c.XXX) System settings updated (S005) Meaning Settings not requiring rebooting were changed.
Description serviceman call (S240) Meaning The camera...