Canon network camera VBC60 User Manual

1-25
Setting HTTP/FTP Upload and E-mail Notification (Upload)
1
1Detailed Settings
HTTP Upload
(1) [Notification]
Select [ Notification Only with HTTP ] or [Image attached Notification with HTTP ] as the content 
of notification.
(2) [URI] Enter the URI to upload to (using up to 255 characters).
(3) [User Name], [Password] Enter the user name and password required for authentication.
(4) [Proxy Server] Enter the host name or IP address of the proxy server (using up to 63 characters).
z
Reduce the...

1-26
Setting HTTP/FTP Upload and E-mail Notification (Upload)
(5) [Proxy Port]Enter the port number of the proxy server (default = 80).
(6) [Proxy User Name], [Proxy Password] Enter the user name and password of the proxy server.
(7) [Parameter (query string)] Enter an appropriate parameter (using up to 127 characters). The parameter can be entered 
using % characters (  P. 5-2).
(8) [HTTP Upload Test] Clicking the [ Exec] button initiates an upload test based on the settings currently applied.
FTP...

1-27
Setting HTTP/FTP Upload and E-mail Notification (Upload)
1
1Detailed Settings
(6) [File Naming]
Set a desired file naming mode.[YYMMDDHHMMSSms]
Image is uploaded according to the file name format of 
{year}{month}{day}{hour}{minute}{s econd}{ms}.jpg. Example: 20080123112122000.jpg)
[YYMMDD Directory/HHMMSSms]
A sub directory named {year}{month}{day} is created first, and then the image is 
uploaded using the file name {hour}{minute}{second}{ms}.jpg. (Example: 20080123/
112122000.jpg)
[Loop]
Image is...

1-28
Setting HTTP/FTP Upload and E-mail Notification (Upload)
E-mail Notification
(1) [Notification]Select [ Text only] or [Text with image ] as the content of notification.
(2) [Mail Server Name] Enter the host name or IP address of the SMTP server (using up to 63 characters).
(3) [Mail Server Port] Enter the port number of the SMTP server (default = 25).
(4) [Sender (From)] Set the e-mail address of the sender (using up to 63 characters).
(5) [Recipient (To)] Set the e-mail address of the recipient...

1-29
Setting HTTP/FTP Upload and E-mail Notification (Upload)
1
1Detailed Settings
(6) [Authentication]
Select [ None], [ POP before SMTP ] or [SMTP-AUTH ] as the e-mail authentication mode.
Set an appropriate mode according to the authentication mode used by the SMTP server to 
send to. [User Name], [Password], [POP Server]
If [POP before SMTP ] is selected as the e-mail authentication mode, enter the user name, 
password, and host name or IP address of the POP server, required for authentication.
[User...

1-30
Setting the Image Server, Audio Server and HTTP 
Server (Server)
Image Server
(1) [Maximum Number of Clients]Set the maximum number of clients that can be connected to the camera at the same time. 
Up to 30 clients can be set. If 0 is set, connection is prohibited except for Admin Viewer.
(2) [Camera Control Queue Length] Set the maximum queue length of requests for the camera control privilege from clients. The 
maximum value is 30. Enter an integer between 0 and 30. If 0 is entered, camera control...

1-31
Setting the Image Server, Audio Server and HTTP Server (Server)
1
1Detailed Settings
Audio Server
(1) [Audio Transmission from the Camera]
When [ Enable] is selected, the audio input through the microphone attached to the camera 
can be transmitted to VB-C60 Viewer.
(2) [Input Volume] Set the audio input volume between 1 and 100. The greater the value, the larger the input 
volume. 
(3) [Voice Activity Detection] If [Enable ] is selected, the audio transmission size is reduced temporarily when no...

1-32
Setting the Image Server, Audio Server and HTTP Server (Server)
Note
Switch [Line In] and [Microphone In] on each setting page according to the 
specification of the microphone ( P. 1-31).
If a wrong input is used, the camera or microphone may be damaged. Be sure to 
set the correct input.
Note
z The volume, sound quality, etc., may change depending on the characteristics of the 
microphone used.
z To output audio from the audio output terminal of the camera, send audio from RM-Lite 
Viewer. Audio...

1-33
Setting the Image Server, Audio Server and HTTP Server (Server)
1
1Detailed Settings
HTTP Server
(1) [HTTP Por t] 
Set the HTTP port number in a range of 80 and 1024 to 65535.
Normally 80 (factory setting) should be used.
(2) [Global Address for the Web Page] If a fixed global address is assigned to t he camera using the NAT function of the router (  P.  
4-12), set the global address and port number here. If [ IP Address] is selected, enter the 
specified IP address in the [ IP Address] field. If...

1-34
Setting the Image Buffer, Motion Detection, Audio 
Playback and Interval Timer (Event)
Image Buffer
(1) [Frame Rate]Set the frame rate that applies when image is  temporarily saved in the image buffer when an 
event occurs.
(2) [Pre-event Buffer (number of image frames)] Set the number of images to be buffered before the event.
(3) [Post-event Buffer (number of image frames)] Set the number of images to be buffered after the event.You can set the following items.
z
Image Buffer
Set the items...