Canon network camera VBC60 User Manual

1-5
Accessing the Setting Menu
1
1Detailed Settings
Items Common to All Setting Pages
„
Application of Setting Changes
When any setting is changed on each setting page, the grayed-out [ Apply] button shown on 
the top right of the setting page turns blue.
To make the new setting effective, click the [ Apply] button.
To restore the original setting, click the [ Clear] button.
„Setting Changes Requiring Rebooting
The items whose setting will become effective only after the camera is rebooted are...

1-6
Accessing the Setting Menu
„Returning to the Setting Menu
To return to the Setting Menu from each setting page, click the [ Settings menu] button on the 
top right of the setting page.
Note
z Be sure to change the settings of each camera within one setting page.
z Do not move between setting pages using the [ Back] and [For ward ] buttons of the browser. 
The new settings may return to the original settings or unwanted setting changes may 
occur.
Tip
Click  [ Help] at the beginning of any item on a...

1-7
1
1Detailed Settings
Setting the Administrator Password, LAN, IPv6, 
DNS, etc. (Network)
Administrator Password
(1) [Password]
Set the Administrator password. You can use up to eight (single-byte) ASCII characters 
(space or printable characters). The factory settin g is VB-C60. If Admin Viewer or VBAdmin 
Tools is connected, change the password after terminating the connection. 
(2) [Confirm Password] Enter the same password for confirmation.You can set the following items.
z
Administrator Password...

1-8
Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
LAN
(1) [IP Address Setting]Select [ Auto (DHCP) ] or [Manual ] as the address setting mode. If [Auto (DHCP) ] is selected, 
the values automatically acquired from  the DHCP server will be entered in [IP Address], 
[Subnet Mask ] and [Default Gateway Address ]. If [Manual ] is selected, directly enter the 
values appropriate for the environment in which the camera is used.
(2) [IP Address] If [Manual ] was selected in (1), enter a...

1-9
Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
1
1Detailed Settings
IPv6
(1) [IPv6]
Select [ Disable] or [Enable ] regarding the use of IPv6.
(2) [IPv6 Address] If [Enable ] is selected for IPv6, an automatically acquired address will be shown.
Note
zFor [ IP Address ], [Subnet Mask ] and [Default Gateway Address ], contact your network 
administrator.
z If any of the [ IP Address], [Subnet Mask ] and [Default Gateway Address ] settings is wrong, 
network access may be disabled....

1-10
Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
DNS
(1) [Name Server Address 1], [Name Server Address 2]Enter each name server address you want to register. If only one address is registered, keep 
the [ Name Server Address 2 ] field blank.
(2) [Host Name Registration with DDNS] Select [ Enable] and enter the host name. The host name can be registered in the name 
server.
You can use up to 63 (single-byte) characters including A to Z, a to z, 0 to 9, - (hyphen), _ 
(underscore)...

1-11
Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
1
1Detailed Settings
SNMP
(1) [SNMP]
Select whether to use SNMP from [ Disable] or [Enable ]. When [Enable] is selected, the SNMP 
Manager can reference information set in the camera.
(2) [Community Name] Set a community name for SNMP. It is recommended that you change the default community 
name to ensure security of the system.
(3) [Administrator Contact Information] Set contact information (e-mail address, etc.) for the...

1-12
Setting the Date and Time (Date and Time)
Current Date and Time
[Date], [Time]The date and time currently  set in the camera is shown.
Setting
(1) [Setting Method]
Select [ Set manually ], [Synchronize with NTP server ], [Synchronize with NTP broadcast ] or 
[Synchronize with computer time ].
(2) [Date], [Time] Set the following items according to the selection for [ Setting Method] made in (1).
[Set manually]
You can set a desired date and time. Enter the date in the order of  and 
time in the...

1-13
Setting the Date and Time (Date and Time)
1
1Detailed Settings
[Synchronize with NTP server]
The camera will synchronize with that time of the NTP server. Enter the IP address of the 
NTP server.
[Synchronize with NTP broadcast]
The camera will synchronize with the NTP broadcast time.
[Synchronize with computer time]
The camera will synchronize with the date and time of the computer currently accessing 
the camera. The time zone will also be selected automatically.
(3) [Time Zone]  Select from the...

1-14
Setting the Camera Control and External Device 
Name (Camera)
General
[Camera Name]Be sure to enter the camera name into [ Camera Name (alphanumeric characters) ].
Up to 15 ASCII characters (spaces or printable characters) can be used for the [ Camera 
Name (alphanumeric characters)]. You can set the following items.
z
Camera Name
Enter the name of the camera. The camera name is required if the RM-series software 
is used with the camera.
z Initial Camera Settings 
Set the AE mode, slow shutter,...