Canon network camera VBC50FSi User Manual

4-9
VB Administration Tools
View Restriction Tool
t Camera Selection box
Another camera cannot be selected with the VB-C50FSi/VB-C50Fi.
y “Apply the view restriction”
View restriction settings are applied when this item is selected.
u View Restriction Value Input boxes and “Get Value” button
The view restriction settings can be edited by entering values in the Vi\
ew Restriction Value
Input boxes. When the “Get Value” button is clicked, the current a\
ngle of the camera can be
retrieved and reflected in...

4-10
Setting View Restrictions
You can set up a view restriction by either entering a value in the view\
 restriction setting input box
or by using the following 2 methods. Select the way which suits your env\
ironment or according to
your preference.
■ Changing Settings from the View Restriction Preview Frame
The View Restriction Preview frame can be used to set view restrictions.\
○○○○○○To Make Settings...
1. Select “Apply the view restriction”.
View Restriction Tool
2. Set the view restrictions by...

4-11
VB Administration Tools
View Restriction Tool
Retrieving Values from the Camera Zoom Position of the Admin
Viewer and Changing Settings
Admin Viewer can be used to set the view restriction while confirming ca\
mera images.
○○○○○○To Make Settings...
1. Select “Apply the view restriction”.
2.Click the “Admin Viewer” button to start it up.
3. In Admin Viewer, click the “Start Control”
button to obtain control rights for the camera.
4. Move the camera angle to the position you want to set with the...

4-12
Note
After the view restrictions have been set, please check to be sure that \
the view
restrictions are correctly reflected in the Viewer. When checking from t\
he Admin
Viewer, choose “View Restriction” - “ON” from the “Privil\
ege” menu bar (→ P.4-64).
View Restriction Tool
Tip
● When you want to clear the view restriction settings, clear the “Appl\
y the view
restriction” check box, click the “Apply” button and then the “\
Save Settings” button.
● Even if the “Apply the view restriction” is...

4-13
VB Administration Tools
Preset Setting Tool
The Preset Setting Tool enables you more visually and easily to set Pres\
ets and home position.
Presets are set by operating the mouse. You can also enter settings for \
a Preset Tour with which
you can tour and monitor two or more Presets within a specified start an\
d end time.
After setting presets, set the preset tour.
Reflecting preset settings in the viewer Executing a
preset tour
C
O
P
Y  

4-14
Preset Setting Tool
Preset Setting Tool Display Screen
The display screen for the Preset Setting Tool is divided into the “P\
reset Settings Area” and the
“Preset Tour Settings Area”. A maximum of 10 Presets and home posi\
tions can be set. In the
“Preset Tour Settings Area”, you can enter settings for a Preset T\
our with which you can tour and
monitor two or more presets within a specified start and end time. Below\
 is a description of the
“Preset Setting Area” screen.
See page 4-19 for...

4-15
VB Administration Tools
Preset Setting Tool
t Preset Selection box
Select the preset to set or “Home”. “Home” is the setting fo\
r home position.
y “For picture recording only”
When this is checked, presets are used for picture recording only; when \
it is not checked,
presets can be used not only for picture recording but for the viewer as\
 well. If you selected
“Home” in the Preset Selection box, this setting will be grayed ou\
t (setting not possible).
u Preset Name
A name can be assigned to...

4-16
Preset Setting Tool
Setting Presets
You can set up Presets by either entering a value in the camera paramete\
rs or by using the
following 2 methods. Select the way which suits your environment or acco\
rding to your preference.
Changing Settings from the Preset Preview Frame
The Preset Preview frame can be used to set presets.
○○○○○○To Make Settings...
1.From the Preset Selection box, select the
preset to be set and enter a name in “Preset
Name”.
2.Set the preset by dragging the Preset Preview...

4-17
VB Administration Tools
Retrieving Values from the Camera Zoom Position of the Admin
Viewer and Changing Settings
Start up Admin Viewer and set the camera zoom position as a preset.
○○○○○○To Make Settings...
1. From the Preset Selection box, select the
preset to be set, and enter the “Preset Name”.
Preset Setting Tool
2.Click the “Admin Viewer” button to start it up.
3. Click the “Start Control” button in the Admin
Viewer to obtain camera control rights for the
camera.
4. Move the camera zoom...

4-18
Tip
●You can set a maximum of 10 presets.
● Changes in the preset settings are not reflected to the viewer while it \
is connected.
● After the presets have been set, please check to be sure that the preset\
s are
correctly reflected in the Viewer.
● Once presets have been set, they cannot be deleted. If you do not want t\
o these
presets to be used, select “For picture recording only” ( → P.4-15) so that the presets
cannot be used in the Viewer for PC.
Preset Setting Tool
C
O
P
Y