Canon network camera VBC50FSi User Manual

4-49
VB Administration Tools
Setting Up Night Mode
○○○○○○To Make Settings...
1. With the Schedule Setting Tool, open the Night Mode Setting Tool.
In the Service tab of the Schedule Setting screen for a Normal or Specia\
l Schedule, check
Night Mode, select a setting number and click the “Detail” button \
( → P.4-33), or click the
“Night mode setting tool” button on the toolbar.
If you have opened the Night Mode Tool from the toolbar, select a settin\
g number from the
setting number selection box in the...

4-50
External Device Input Setting Tool
Below is a description of the External Device Input function which perfo\
rms video recording when
a signal from an external device connected to the Multi-Terminal Module \
(→ P.1-11) such as a
sensor is sent to the VB-C50FSi/VB-C50Fi.
External Device Input Setting Tool Display Screen
q “Load Settings” button
Loads the External Device Input settings currently set in the VB-C50FSi/\
VB-C50Fi.
w “Save Settings” button
Saves the External Device Input settings edited...

4-51
VB Administration Tools
o Pre-event Recording Time (sec.) and Interval
Enter the required number of seconds, within a range of 0-10 seconds for\
 picture recording before an ON
and/or OFF event.  Also enter an interval for performing picture recordi\
ng, within a range of 0.1-1.0 seconds.
! 0Post-event Recording Time (sec.) and Interval
Enter the required number of seconds, within a range of 0-10 seconds for\
 picture recording following an ON
and/or OFF event. Also enter an interval for performing...

4-52
Schedule Setting Tool
Tip
See “Relationship between ON and OFF events and picture/audio recording*” (→
P.4-55) for the relationship between ON and OFF events in the picture a\
nd 
audio
recording* settings.
*
 Only available with a particular model of the VB-C50FSi ( → P.iii)
3. Specify the Audio Playback operation settings.
Check “Playback at ON event” or “Playback at OFF event” and \
select the playback sound clip
name and volume.
Tip
For registering and deleting audio files, see “Audio Playback...

4-53
VB Administration Tools
External Device Output Setting Tool
The section below describes the output settings to an external device co\
nnected to the Multi-
Terminal Module ( → P.1-11).
External Device Output Settings Tool Display Screen
q “Load Settings” button
Loads the External Device Output settings currently set in the VB-C50FSi\
/VB-C50Fi.
w “Save Settings” button
Saves the External Device Output settings edited using this Tool.
After setting the External Device Output function, be sure to...

4-54
Setting Up External Device Output
○○○○○○To Make Settings...
1. With the Schedule Setting Tool, open the External Device Output Setting \
Tool.
In the Service tab of the Schedule Setting screen for a Normal or Specia\
l Schedule, check
Output1-3 in External Device Output, select a setting number and click t\
he “Detail” button
(→  P.4-33), or click the “External device output setting tool” butt\
on on the toolbar.
If you have opened the External Device Output Tool from the toolbar, sel\
ect an...

4-55
VB Administration Tools
Schedule Setting Tool
Tip
Relationship between ON and OFF events and picture/audio
recording*
* Only available with a particular model of the VB-C50FSi ( → P.iii)
ONOFFONOFF
ON
OFF
Picture Recording
A udio recordingAB CD
ONOFF
The figures below show the methods (A-D) of picture and audio recording that use 
motion detection and external device input based on the timing of ON and OFF events. 
● For A and C, recording is controlled to the pre-event recording time, and for B...

4-56
Tip
E-mail Notification Settings dialog box
When pictures have been recorded, you can send the recorded picture and \
data in
an e-mail. Settings for sending mail messages are performed in the E-mai\
l Notification
Settings dialog box.
Select E-mail Notifications Settings from Tools in the menu bar in the M\
otion Detection
Setting screen or External Device Input Setting screen and the dialog bo\
x appears.
qType of Notification
Select a notification setting from “Text only” or “Text and rec\
orded...

4-57
VB Administration Tools
Tip
Audio Playback Settings dialog box (VB-C50FSi only)
To play back audio, you have to register the audio file you want to play\
 back. Settings for
registering or deleting audio files are performed in the Audio Playback \
Setting dialog box.
Select “Audio Playback Settings” from Tools in the menu bar  in th\
e Timer Settings screen,
Motion Detection Setting screen or External Device Input Setting screen \
and the dialog box
appears.
1. From the “Sound  Clip List” in the...

4-58
The Log Viewer is a tool for downloading log files, and viewing and mana\
ging the operating status
of the device. The Log Viewer provides monitoring of illegal access and \
a way of dealing with
errors etc.
Downloading Log Files
○○○○○○To Download...
1.When Log Viewer is started up from the
VBAdmin Startup Panel, it automatically
retrieves the most recent log file and displays
it.
To retrieve a list of log files, choose Download from
the File menu bar.
When the list is retrieved, a list of log...