Canon network camera VBC50FSi User Manual

4-19
VB Administration Tools
Preset Tour
A Preset Tour can tour and monitor two or more specified Presets.
You can also set Preset Tour with “Presetting Best Shot” in Chapte\
r 3, “Basic Settings” ( → P.3-12).
Preset Tour Settings Area Display Screen
qwy
i
o! 0
q Tour Schedule list
Displays a list of the presets which have Preset Tour settings.
w “Add” button
Adds a preset to the Tour Schedule List.
e “Up” and “Down” button
Select a Preset from the list, and click the “Up” or “Down” \
button to change...

4-20
Tip
Preset Tour does not operate when the camera is being controlled with th\
e Viewer
for PC, or the Admin Viewer and so on.
Preset Setting Tool
oSpeed (Z)
Sets the speed at which the camera moves when zooming, within a range of\
 1-8. By moving
the slide bar from left to right, the numeric value becomes larger and t\
he speed increases.
! 0Pause (sec)
Sets the time for which the camera pauses in the preset position, within\
 a range of 0-120
seconds in units of five seconds.
C
O
P
Y  

4-21
VB Administration Tools
2. Select the preset number you want to add to
the Tour Schedule from the Preset setting
area and click the “Add” button.
The preset is registered in the Tour Schedule list. You
can register a maximum of 10 presets.
Setting Preset Tour
○○○○○○Setting up
1. Select an option from Auto Preset Tour.
Select either “For Viewers” or “Always”.
TipYou cannot add a home position to the Tour Schedule list.
Preset Setting Tool
3. Select a preset in the Tour Schedule list andwith the...

4-22
Schedule Setting Tool
With the Schedule Setting Tool, you can set up Timer, Motion Detection, \
Night Mode, External
Device Input and External Device Output services to perform automaticall\
y on a specified day of
the week or time of the day. You can set the start and end time and the \
content of the service on
the calendar in the Schedules Setting screen.
2. Enter settings for the Services (→ P.4-33).
● Timer:  Records pictures and audio* into the VB-C50FSi/VB-C50Fi and performs Aud\
io...

4-23
VB Administration Tools
Schedule Setting Tool Display Screen (Toolbar)
There are two kinds of Schedule settings, Normal Schedule and Special Sc\
hedule. The buttons in
the toolbar below can be used for both Normal and Special Schedules.
With these buttons, you can load and save setting information, stop comm\
unication, select Normal
schedule ( → P.4-24) and Special schedule ( → P.4-28) as well as open each service setting screen
( →  P.4-34, 4-37, 4-48, 4-50, 4-53).
q “Load Settings” button
Loads...

4-24
Normal Schedule
With Normal Schedule, you can set up a schedule of one week from Sunday \
to Saturday. For
example, during the weekend when there is nobody in the office from 6:00\
pm on Friday to 9:00am
on Monday, the Motion Detection service will operate each week during th\
e period of time you
have specified and automatically monitor the office.
Normal Schedule Display Screen
qw
e
r
t
q Schedule selection checkbox
Check to select the number of the schedule you want to set up. Up to 16 \
types...

4-25
VB Administration Tools
Setting Up a Normal Schedule
○○○○○○To Make Settings...
1. With the Normal Schedule displayed, select
an optional schedule number.
The schedule track for the number you have selected
is displayed in the weekly calendar. At this stage, the
correct start and end time and services are not set up
in the schedule track.
Schedule Setting Tool
2. Double-click the schedule track.
The Normal Schedule Settings dialog box appears.
Enter settings for the schedule.
3. Enter the name of...

4-26
Schedule Setting Tool
Tip
●On Weekly setting, if you specify the same time and the same day in star\
t and end
time, end time will be the same time in the following week, and the sche\
dule is
applied to all time periods.
● On Weekly on setting, if you specify the same start and end time, the en\
d time will
be on the following day at the same time.
● If you enter “24:00” as the start or end time, the time will be re\
gistered as “23:59”.
To set “24:00”, enter “00:00” on the following day.
5....

4-27
VB Administration Tools
Tip
● You can register different settings for each setting number. The number \
of setting
numbers that can be registered differs depending upon the service.
● An icon for the service you have set up appears in the schedule track in\
 the calendar.
However, where the schedule track is short, it may be that not all of ic\
ons are
displayed.
The icons displayed for each service are as follows:
 “Timer” “Motion Detection” “Night Mode”
 “External Device Input” “External Device...

4-28
Special Schedule
With Special Schedule, you can set up a schedule on one specific day of \
the week. For example,
on a public holiday when there is nobody in the office, set up a service\
 to automatically monitor
the office.
Special Schedule Display Screen
qSet Special Day selection box
Select the special day you want to register from special days A-D or sel\
ect “Erase Special
Day”.
w “Special Day List” button
Click to display the Special Day List dialog box. The dates of all regis\
tered Special...