Canon network camera VBC50FSi User Manual

3-19
Basic Settings
Setting Up the HTTP, Camera and Audio Servers (Server)
Audio Reception
• Output Volume
• Echo Canceller
Note
●Use the Multi-Terminal Module ( → P.1-11) when connecting a microphone* or
speaker to the VB-C50FSi.
● Setting “Noise Canceller”, “Slope Filter”, and “Echo Canc\
eller” to “ON” may have
an effect on the audio volume and quality. Set “ON” or “OFF”\
 according to the
environment where you install and how you use the VB-C50FSi.*
● When sending or 
receiving audio*, please read...

3-20
Setting User Access Privileges (Access Control)
You can perform the following settings with Access Control.
●
Authorized User Account: Register users who may connect to the VB-C50FSi\
/VB-C50Fi.
● Authorized/Restricted Host Specification: Control whether a specific hos\
t is to have
access or not.
When you have made changes to the settings, click the “OK” button \
to return to the
Settings Title Page. If you do not make any changes, click the “Cance\
l” button.
Authorized User Account
1 “User...

3-21
Basic Settings
Authorized/Restricted Host Specification
Note
●If you do not make a Host List, access is permitted to any hosts.
● If the Host List provided prohibits access for all hosts, the Host Restr\
iction function
is disabled and access is permitted to all hosts.
● To prohibit access over HTTP connection via a proxy server, the address \
of the
proxy server should be set.
● When you set a host list which leads to prohibit yourself, restore the f\
actory default
settings.
Setting User Access...

3-22
Tip
The Host Restriction function applies to hosts running client applicatio\
ns such as
viewer. Access restrictions are imposed using a list made up of one or m\
ore entries
written using the format described below.
Listing Format
[!] addr [-addr2]
●“addr” is written in standard IP address format.
● Because the IP addresses in the “addr” and “addr2” parameter\
s define the range
of IP addresses, if an IP address A is higher than “addr” and lowe\
r than “addr2”, A
is included in the addr-addr2...

3-23
Basic Settings
Setting the Date and Time (Date and Time)
You can perform the following settings with Date and Time.
●Current Camera Time: Displays the time set up for the camera.
● New Camera Time: For setting up the time on the VB-C50FSi/VB-C50Fi.
● Time Zone: Select the appropriate time zone from the list.
When you have made changes to the settings, click the “OK” button \
to return to the
Settings Title Page. If you do not make any changes, click the “Cance\
l” button.
Current Camera Time
1
2
1...

3-24
New Camera Time
1
2 3
Time Zone
1
Tip
Even if you have selected “Synchronize with NTP server”, the date \
and time will not
change if the VB-C50FSi/VB-C50Fi cannot connect with the NTP server, for\
 example,
because the IP address for the NTP server is not correct.
Setting the Date and Time (Date and Time)
1 “Synchronize with computer time”
Set to the date and time of the PC currently accessing the VB-C50FSi/VB-\
C50Fi via a Web
browser.
2 “Set manually”
Select this item when the date and time are...

3-25
Basic Settings
You can perform the following settings with Miscellaneous.
●DNS: Register the Name Server Address and Host Name for registering host\
 names
such as Mail Server Host.
● Mail: For setting up the mail addresses which are to receive recorded pi\
ctures and
log messages.
● External Device Names: For setting up the names for the external devices\
 to be
used with VK-64 etc.
● LED: For setting the LED on the VB-C50FSi/VB-C50Fi to turn on or off.
When you have made changes to the settings,...

3-26
Mail
1
3
5
2
4
6
Setting Up Name Server Address and Mail etc. (Miscellaneous)
1“Mail Server Host”
Specify the SMTP server.
2 “Sender’s (From) Mail Address”
Specify the mail sender.
3 “Recipient (To) Mail Address”
Specify the mail recipient.
4 “POP before SMTP”
Select if the mail host server requires POP user authentication.
5 “User Name” and “Password”
Specify the settings in “User Name” and “Password” necessary\
 for authentication.
6 “POP Server”
Specify the POP server.
C
O
P
Y  

3-27
Basic Settings
External Device Names
1
2
LED
1
Setting Up Name Server Address and Mail etc. (Miscellaneous)
1“External Input Device 1-2”
“Device Name”
To distinguish between the different external devices connected to the M\
ulti-Terminal Module,
be sure to enter a device name. Enter a device name consisting of up to \
15 alphanumeric
characters.
2 “External Output Device 1-3”
“Device Name”
To distinguish between the different external devices connected to the M\
ulti-Terminal Module,
be sure to...

3-28
You can use the following items with the Administration Tools.
● On-board File System Information: Displays the status of VB-C50FSi/VB-C5\
0Fi’s
memory.
● Recorded Picture and 
Audio data* Information and Manipulation: Displays the status
of pictures and 
audio* recorded in the VB-C50FSi/VB-C50Fi and deletes recorded
pictures and 
audio*.
* Only available with a particular model of the VB-C50FSi ( → P.iii)
●Miscellaneous: Confirm settings for the VB-C50FSi/VB-C50Fi and initializ\
ation.
If you do...