Canon Maxify Mb5320 User Guide

Setting the Telephone Line TypeBefore using your machine, make sure you set the correct telephone line type for your telephone line. If you
are unsure of your telephone line type, contact your telephone company. For xDSL or ISDN connections,
contact the telephone company or service provider to confirm your line type.
Important
•
For users in China:
After plugging the power cord and turning on the machine, the telephone line type is selected automatically. However, if the machine is connected to the...

Rotary pulseSelect when your telephone line type is pulse dialing.
Touch tone Select when your telephone line type is tone dialing.
Setting the Telephone Line Type Manually in China
This section describes the procedure to set the telephone line type manually in China.
1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   Setup .
Using the Operation Panel
3.
Tap  Device settings .
4.
Tap FAX settings .
5.
Tap FAX user settings .
6.
Tap Telephone line auto selection .
The current...

Rotary pulseSelect when your telephone line type is pulse dialing.
Touch tone Select when your telephone line type is tone dialing.
793
 

Setting the Receive ModeSet the receiving operation (receiving mode).
For details on how to set the receive mode:
Setting the Receive Mode
You can select the appropriate mode.
For details on the selectable receive mode:
About the Receive Mode
For details on the advanced settings of the receive mode:
Advanced Settings of Receive Mode
Note
•
The receiving operation procedure varies depending on the selected receive mode. For details on receiving method depending on each receive mode:
Receiving Faxes
•
If...

•DRPD is available only in the US and Canada.•
Network switch  may not be available depending on the country or region of purchase.
•
Refer to Receiving Faxes  for information on receiving faxes or the procedure for each receive
mode.
About the Receive Mode You can select the receive mode suitable for your fax use conditions: whether you use a dedicated line for
fax, etc.
Receive
modeYour fax use conditionReceiving operationTEL priority
modeWhen mainly receiving voice
calls (with a telephone or
answering...

◦RX start time
You can specify the length of time until automatic reception is started when  Manual/auto switch:
ON  is selected. Specify the length of time and tap  OK.◦
User-friendly RX: ON /User-friendly RX: OFF
If you select  User-friendly RX: ON , the machine automatically switches from telephone calling to
fax reception by detecting the fax signal (CNG signal) when you lift the handset of the telephone
or the answering machine answers. When you have an answering machine connected to the
machine,...

Specify the number of time and tap OK.
Setting the DRPD Ring Pattern (US and Canada only) If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your telephonecompany, your telephone company will assign two or more telephone numbers with distinctive ring
patterns to your single telephone line, allowing you to have different numbers for fax calls and voice calls
using only one telephone line. Your machine will automatically monitor the ring pattern, and will...

Setting the Sender InformationYou can set the sender information such as date/time, unit name, and unit fax/telephone number.
About the Sender Information
Setting the Date and Time
Setting Daylight Saving Time (Summer Time)
Registering User Information
About the Sender InformationIf the unit name and unit fax/telephone number are registered, they are printed with date and time as
sender information on the recipient's fax.
A.
Date and time of transmission
B.
Unit fax/telephone number
C.
Unit name
D....

1.Make sure that the machine is turned on.2.
Flick the HOME screen, then tap  Setup .
Using the Operation Panel
3.
Tap  Device settings .
4.
Tap Device user settings .
5.
Tap Date/time setting .
6.
Set the date.
1.
Tap a setting item to change.
2.
Tap the number to enter.
Enter only the last two digits of the year.
3.
Tap OK.
4.
Tap  OK again when all settings are completed.
7.
Set the time.
1.
Tap a setting item to change.
799
 

2.
Tap the number to enter.
Enter the date and time in 24-hour format.
3.
Tap OK.
4.
Tap  OK again when all settings are completed.
8.
Press the  HOME button to return to the HOME screen.
Setting Daylight Saving Time (Summer Time) Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at
certain periods of the year.
You can set your machine to automatically change the time by registering the date and time that daylight
saving time (summer time) begins and...