Canon Maxify Mb5320 User Guide

Setting for Scanning from the Operation Panel
You can make the setting for scanning from the operation panel.
Important
•
Set IJ Scan Utility to use your scanner or printer via a network connection beforehand.
Setting for Scanning with IJ Scan Utility
1.
Check that IJ Network Scanner Selector EX is running.
If IJ Network Scanner Selector EX is running, 
 (IJ Network Scanner Selector EX) appears in the
notification area on the desktop. Click 
 to check the hidden icons as well.
Note
•
If the icon is not...

•MP Drivers is installed•
Network settings of your scanner or printer is completed after installing the MP Drivers
•
Network communication between your scanner or printer and computer is enabled
If your scanner or printer still does not appear, refer to "Problems with Network Communication" for
your model from Home of the  Online Manual.
782
 

Selecting a Response to Commands from the Operation Panel
Using IJ Scan Utility
IJ Scan Utility allows you to specify how to respond when scanning from the operation panel.
Note
•
The screens for scanning photos from the operation panel are used as examples in the followingdescriptions.
1.
Start IJ Scan Utility.
2.
Click  Settings... .
The Settings dialog box appears.
3.
Select a scan mode on the  (Scanning from the Operation Panel) tab.
783
 

Note•
Refer to the following for details.
Settings (Save to PC (Photo)) Dialog Box
Settings (Save to PC (Document)) Dialog Box
Settings (Attach to E-mail (Photo)) Dialog Box
Settings (Attach to E-mail (Document)) Dialog Box
4.
Set Scan Options .
5.
Specify the file name and other settings in  Save Settings.
784
 

6.
Select the application you want to start after scanning in Application Settings.
7.
Click OK.
The responses will be executed according to the specified settings when you start scanning from the operation panel.
785
 

Faxing
Preparing for Faxing
 
Sending Faxes Using the Operation Panel ofthe MachineRegistering Recipients
 
Receiving FaxesOther Useful Fax Functions
 
Sending Faxes from a Computer
786
 

Preparing for FaxingConnect the machine to the telephone line and set up the machine before using the faxing functions. Thenspecify the basic setting such as sender information, date/time, and daylight saving time.
Important
•
If the Power Disconnects Unexpectedly:
If there is a power failure or if you accidentally unplug the power cord, the date/time settings will be
reset.
•
The settings for user information and directory will be retained.
•
All faxes stored in the machine's memory, such as unsent...

Connecting the Telephone LineThe connection method differs depending on your telephone line.•
If you connect the machine to wall telephone line directly/If you connect the machine with the xDSLsplitter:
Basic Connection
•
If you connect the machine to another line such as an xDSL:
Connecting Various Lines
If the connection is incorrect, the machine cannot send/receive faxes. Connect the machine correctly.
Important
•
Do not connect fax machines and/or telephones in parallel (US and Canada only). If two...

Important•
Be sure to connect the telephone line before the machine is turned on.
If you connect the telephone line when the machine is turned on, turn the machine off and unplug the power cord. Wait for 1 minute then connect the telephone line and power plug.
Note
•
Refer to Rear View  for the position of the telephone line jack and the external device jack.
•
Before connecting a telephone or answering machine, remove the Telephone connector cap.
•
For users in the UK:
If the connector of the external...

Note•
When connecting to the xDSL line, select the same line type as you are subscribing to in
Telephone line type .
Setting the Telephone Line Type
•
Connecting to an xDSL
A.
Analog Subscriber Line
B.
xDSL modem (splitter may not be built-in to the modem)
C.
Computer
D.
Telephone or answering machine
Important
•
When the splitter is not built-in to the modem, do not branch the telephone line before the splitter
(wall side). And also, do not connect splitters in parallel. The machine may not be able to...