Canon Maxify Ib4020 User Guide
Here you can view all the pages of manual Canon Maxify Ib4020 User Guide. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 211
Setting of the Access Point Mode The initial value of the access point mode is set as follows.SSID (access point name)XXXXXX-iB4000series * "XXXXXX" is the last six digits of MAC address of the printer.Security settingWPA2-PSK (AES)PasswordSerial number of the printer Note • To confirm the MAC address of the printer, print out the network setting information. Printing Out Network Setting Information • You can change the security setting and the password using IJ Network Tool. If you change the...
Page 213
Useful Information about Network Connection Default Values Set at Factory (Network) Connecting the Printer to the Computer Using a USB Cable When Detecting the Printers Have the Same Name during Setup Connecting to Other Computer with LAN/Changing the Connection Method from USB to LAN Printing Out Network Setting Information 213
Page 214
Default Values Set at Factory (Network)Default Values of the LAN ConnectionItemThe defaultChange LANLAN inactiveSSIDBJNPSETUPCommunication modeInfrastructureWireless LAN securityDisableIP address (IPv4 )Auto setupIP address (IPv6 )Auto setupTCP/IP settingsIPv4/IPv6Enable/disable IPv6ActiveEnable/disable WSDActiveTimeout setting1 minuteEnab./disab. BonjourActiveService name (Bonjour settings)Canon iB4000 seriesLPR settingActiveDRX setting (Wireless LAN )ActiveDRX setting (Wired LAN )Active Default...
Page 215
Connecting the Printer to the Computer Using a USB CableConnect the printer and the computer using a USB cable as the illustration below. The USB port is located on the rear of the printer.215
Page 216
When Detecting the Printers Have the Same Name during SetupWhen the printer is detected during setup, you may see multiple printers of the same name on the detectionresult screen. Select a printer with checking the MAC address or the serial number set to the printer against that on the detection result screen. Note • A serial number may not be displayed on the detection result screen. To check the MAC address of the printer, print out the network setting information. Printing Out Network Setting...
Page 217
Connecting to Other Computer with LAN/Changing the Connection Method from USB to LAN To add the computer connecting the printer with LAN or to change the connection method between the printer and the computer from USB to LAN, perform setup with the Setup CD-ROM or perform it according to the instructions on our website. Connecting to Other Computer with LANTo add the computer connecting the printer with LAN, perform setup with the Setup CD-ROM or perform it according to the instructions on our website....
Page 218
Printing Out Network Setting InformationYou can print out the current network settings of the printer. Important • This print out contains valuable information about your computer. Handle it with care. 1. Make sure that the printer is turned on. 2. Load a sheet of A4 or Letter-sized plain paper. 3. Press the Setup button. The Setup menu screen is displayed. 4. Use the button to select Device settings, then press the OK button. 5. Use the button to select LAN settings, then press the OK button....
Page 219
IPv4 Default GatewayDefault Gateway (IPv4)XXX.XXX.XXX.XXXSubnet MaskSubnet MaskXXX.XXX.XXX.XXXIPv6 IP Address *2Selected IP Address (IPv6)XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXXIPv6 Default Gateway *2Default Gateway (IPv6)XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXXSubnet Prefix Length *2Subnet Prefix LengthXXXIPsec *3IPsec settingActiveSecurity Protocol *3Method of the Security ProtocolESP/ESP & AH/AHWireless LAN DRXDiscontinuous reception (wireless LAN)Enable/DisableWired LANWired...
Page 220
Bonjour Service NameBonjour service nameBonjour service name (Up to 52 alphanumeric characters)DNS ServerGetting DNS Server automaticallyAuto/ManualPrimary ServerPrimary server addressXXX.XXX.XXX.XXXSecondary ServerSecondary server addressXXX.XXX.XXX.XXXProxy ServerProxy Server settingEnable/DisableProxy PortSpecifying Proxy Port1 to 65535Proxy AddressProxy AddressXXXXXXXXXXXXXXXXXXXX ("XX" represents alphanumeric characters.) *1 Depending on the country or region of purchase, one of the channels...