Canon Maxify Ib4020 User Guide

LAN settings•
Change LAN
Enables either wireless LAN, wired LAN, or access point mode. You can also disable all.
•
Wireless LAN setup
Selects the setup method for wireless LAN connection.
Note
•
You can also enter this setting menu by selecting  Wireless LAN setup from the Setup menu
screen.
When this menu is selected, the printer starts searching for a WPS-compatible access point. If the
printer detects the access point, follow the on-screen instructions to set up wireless LAN. If an access
point is not...

Note•
When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows
8.1, Windows 8, Windows 7, and Windows Vista.
Timeout setting Specifies the timeout length.
◦
Bonjour settings
Setting items for LAN using Bonjour for Mac OS.
Enab./disab. Bonjour Selecting  Active allows you to use Bonjour to perform the network settings.
◦
LPR setting
Activates/deactivates the LPR setting.
◦
DRX setting
Enables discontinuous reception when using wireless or wired LAN. It allows you to...

Dev. user settings•
Language selection
Changes the language for LCD messages and menus.
Japanese / English / German / French / Italian / Spanish / Dutch / Portuguese / Norwegian / Swedish /
Danish / Finnish / Russian / Ukrainian / Polish / Czech / Slovak / Hungarian / Slovene / Croatian /
Romanian / Bulgarian / Turkish / Greek / Estonian / Latvian / Lithuanian / Simplified Chinese / Traditional
Chinese / Korean / Indonesian
•
Key repeat
Enables/Disables continuous input by pressing and holding down the...

Firmware updateYou can update the firmware of the printer, check the firmware version, or perform settings of a notification
screen.
Note
•
Only  Current version  is available when  LAN inactive is selected for  Change LAN in LAN settings .
•
Install update
Performs the firmware update of the printer.
Important
•
When you use this function, make sure that the printer is connected to the Internet.
Note
•
If the firmware update is not complete, check the following and take an appropriate action.
•
When...

Cassette settingsBy registering the paper size and the media type loaded in the cassette, you can prevent the printer from
misprinting by displaying the message before printing starts when the paper size or the media type of the
loaded paper differs from the print settings. In addition, you can allow the printer to switch the paper source
automatically when a cassette runs out of paper.•
Register paper info
Registers the paper size and the media type you load in the cassette.
Note
•
For details on the...

Reset settingReverts all settings you made to the printer back to the default. However, some data may not be changed,
depending on the current usage state of your printer.•
Web service setup
Reverts the Web service settings back to the default.
•
LAN settings
Reverts the LAN settings other than the administrator password specified by IJ Network Tool back to the
default.
•
Setting data
Reverts the settings such as the paper size or media type back to the default.
•
Device info sending
Reverts only the...

About Quiet settingEnables this function on the printer if you want to reduce the operating noise, such as when printing at night.
Follow the procedure below to perform setting.1.
Make sure that the printer is turned on.
2.
Press the  Setup button.
The  Setup menu  screen is displayed.
3.
Use the  button to select  Quiet setting, then press the  OK button.
4.
Use the  button to select  ON, then press the  OK button.
The LCD returns to the  Setup menu screen.
You can reduce the operating noise while...

Turning on/off the Printer AutomaticallyYou can enable the printer to turn on/off automatically considering the environment
Turning on the Printer Automatically
Turning off the Printer Automatically
Turning on the Printer Automatically
You can enable the printer to turn on automatically when printing data is sent to the printer.
1.
Make sure that the printer is turned on.
2.
Press the  Setup button.
The  Setup menu  screen is displayed.
3.
Use the  button to select  ECO (power on/off) , then press the OK...

Using the Printer with the Access Point ModeBy using the printer as an access point in an environment that does not have wireless LAN router or access
point, or by using the printer as an access point temporarily in an environment that has wireless LAN router
or access point, you can connect the printer to an external device such as a computer or a smartphone and
print from them.
This section describes how to enable the access point mode, the access point name of the printer, and the
security setting....

Note•
If you select SSID or Security protocol  using the  button and press the  OK button, you
can confirm the current access point name (SSID) and the current security setting.
Printing with the Access Point Mode
Print with the access point mode following the procedure below.
1.
Connect an external device such as a computer or a smartphone to the printer via
wireless LAN.
Perform wireless LAN settings with your external device, then assign the access point name specified
for the printer as a...