Canon Lbp 3460 User Guide
Here you can view all the pages of manual Canon Lbp 3460 User Guide. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 81
3-34Printing from the Paper Cassette Loading and Outputting Paper 3 5Hold down the paper as shown in the figures, make sure that the paper stack does not exceed the load limit marks (A), and then set it under the hooks (B) on the paper guides. Make sure that there is sufficient space between the hooks of the paper guides and the paper stack. If there is no sufficient space, slightly reduce the amount of paper. Cassette 1 Cassette 2 (A) (B) (B) (B) (A) (B) (B)
Page 82
3-35Printing from the Paper Cassette Loading and Outputting Paper 3 6Set the paper cassette in the printer. Push the paper cassette into the printer firmly until the front side of the paper cassette is flush with the front surface of the printer. This printers paper cassette cannot automatically detect the paper size. Therefore, you need to register the size of the paper loaded in the paper cassette. See Specifying the Size of the Paper in the Paper Cassette (p. 3-35) to register the paper size....
Page 83
3-36Printing from the Paper Cassette Loading and Outputting Paper 3 •When you change the paper loaded in the paper cassette frequently, it is convenient if you set CASSETTE1 SIZE and/or CASSETTE2 SIZE to MIXED SIZES. When CASSETTE1 SIZE and/or CASSETTE2 SIZE is set to MIXED SIZES, you do not need to specify the settings for CASSETTE1 SIZE and/or CASSETTE2 SIZE each time the different size paper is loaded. However, observe the following when specifying MIXED SIZES. - Make sure that the size of the...
Page 84
3-37Printing from the Paper Cassette Loading and Outputting Paper 3 4Select the paper size using [ ] and [ ], then press [OK]. = is displayed on the left of the paper size, and the paper size for the paper cassette is specified. When printing from the printer driver on Windows or Macintosh, configure the printer driver. (See Help of the printer driver) When printing from DOS or UNIX, specify the settings for STD PAPER SIZE (See p. 5-19) and STD PAPER TYPE (See p. 5-21) using the control panel. =B5...
Page 85
3-38Printing from the Multi-purpose Tray Loading and Outputting Paper 3 Printing from the Multi-purpose Tray The multi-purpose tray can be loaded with plain paper (64 g/m2) at sizes of A4, B5, A5, Legal, Letter, Executive, and paper at the following custom sizes. •Custom Size Paper When loading paper in portrait orientation: Width 76.2 to 215.9 mm; Length 127.0 to 355.6 mm When loading paper in landscape orientation: Width 127.0 to 215.9 mm; Length 127.0 to 215.9 mm P aper that cannot be loaded in a...
Page 86
3-39Printing from the Multi-purpose Tray Loading and Outputting Paper 3 ■Specifying the Paper Settings in the Printer Driver (See Help of the printer driver) When printing from the printer driver, specify the following settings. For more details on using the printer driver, see Help of the printer driver. [Page Setup] Sheet [Output Size] = the size of the loaded paper [Paper Source] Sheet [Paper Source] = [Multi-purpose Tray] [Paper Type] = [Plain Paper L]: Specify when the paper curls...
Page 87
3-40Printing from the Multi-purpose Tray Loading and Outputting Paper 3 Loading Plain Paper, Heavy Paper, Transparencies, or Labels in the Multi-purpose Tray Perform the following procedure to load plain paper, heavy paper, transparencies, or labels in the multi-purpose tray. 1Open the multi-purpose tray. Holding the opening at the center of the printer, open the multi-purpose tray. 2Pull out the auxiliary tray. IMPORTANT Be sure to pull out the auxiliary tray when loading paper in the multi-purpose...
Page 88
3-41Printing from the Multi-purpose Tray Loading and Outputting Paper 3 3When loading long-size paper such as A4, open the extension tray. 4Spread the paper guides a little wider than the actual paper width.
Page 89
3-42Printing from the Multi-purpose Tray Loading and Outputting Paper 3 5Before loading transparencies or labels, fan them in small batches and align the edges. CAUTION When loading paper, take care not to cut your hands with the edges of the paper. IMPORTANT •Be sure to fan the transparencies or labels thoroughly before loading them. If they are not fanned enough, multiple sheets of paper may be fed at once, causing paper jams. •When fanning or aligning the transparencies, try to hold the edges to...
Page 90
3-43Printing from the Multi-purpose Tray Loading and Outputting Paper 3 CAUTION When loading paper, take care not to cut your hands with the edges of the paper. IMPORTANT •The multi-purpose tray can be loaded with up to the number of sheets listed below. -Plain paper (Ex. 64 g/m2): Approx. 100 sheets - Heavy paper (Ex. 90 g/m2): Approx. 80 sheets - Heavy paper (Ex. 128 g/m2): Approx. 50 sheets - Heavy paper (Ex. 199 g/m2): 30 sheets -T ransparency : 50 sheets - Label : Approx. 40 sheets •Make sure...