Canon Lbp 3300 User Guide

 
Output Tray 
2-16 
Loading and Outputting Paper
 
2 
•
 
The face-up output slot and its surroundings become hot during or immediately after 
using the printer. Do not touch the face-up output slot and its surroundings when 
removing the jammed paper or performing the related operation.
 
Paper Capacity of the Output Trays 
*Actual paper capacity varies depending on the installation environment, paper type, or paper size. 
Paper Type
Output Trays*
Face-down Output TrayFace-up Output Slot  
Plain paper...

2-17
Loading and Outputting Paper
2
Output Tray
Selecting an Output Tray
Switching to the Face-up Output Slot
When switching an output tray to the face-up output slot, open the output selection 
cover as shown in the figure.
Switching to the Face-down Output Tray
When switching an output tray to the face-down output tray, close the output 
selection cover as shown in the figure.
 

2-18
Loading and Outputting Paper
2
Loading Paper in the Paper Cassette
Loading Paper in the Paper Cassette
The paper cassette can be loaded with plain paper and heavy paper (91 - 120 g/
m2) at sizes of A4, B5, A5, Legal, Letter, and Executive. When the paper source 
has run out of paper, a message indicating there is no paper appears in the Printer 
Status Window, and the < > (Load Paper) indicator (orange) comes on or blinks. 
In this case, refill paper.
Load paper in the paper cassette using the...

2-19
Loading and Outputting Paper
2
Loading Paper in the Paper Cassette
1Pull out the paper cassette.
CAUTION
Be sure to take the paper cassette out of the printer before loading paper. If paper 
is loaded while the paper cassette is partially pulled out, the paper cassette may 
drop or the printer may become damaged resulting in personal injury.
2When changing the size of the paper to be loaded, change the 
positions of the paper guides.
While holding the lock release lever of the side paper guides,...

Loading Paper in the Paper Cassette2-20
Loading and Outputting Paper
2
NOTE
If you are using B5 size paper (182 mm x 257 mm), set the paper guide to JIS B5.
While holding the lock release lever of the rear paper guide, slide the 
guide to the size mark for the paper to be loaded.
Align the position of (A) with the mark for the size of the paper to be loaded.
IMPORTANT
Do not use the 8.5 x 13 position.
3Load the paper stack so that the rear edge is aligned with the 
paper guide.
(A)
 

2-21
Loading and Outputting Paper
2
Loading Paper in the Paper Cassette
CAUTION
When loading paper, take care not to cut your hands with the edges of the 
paper.
IMPORTANT
•Be sure to check if the paper guide is at the position of the size of the loaded paper. 
If the paper guide is set at a wrong position, this may result in misfeeds.
•If you use paper that has been poorly cut, multiple sheets of paper may be fed at 
once. In this case, fan the paper thoroughly, and then align the edges of the stack 
on...

Loading Paper in the Paper Cassette2-22
Loading and Outputting Paper
2
4Hold down the paper as shown in the figure, make sure that 
the paper stack does not exceed the load limit marks (A), and 
then set it under the hooks (B) on the paper guides.
Make sure that there is sufficient space between the hooks of the paper guides and 
the paper stack. If there is no sufficient space, slightly reduce the amount of paper.
IMPORTANT
The following shows the paper capacity of the paper cassette. Be sure that the...

2-23
Loading and Outputting Paper
2
Loading Paper in the Paper Cassette
6Register the size of the loaded paper using the following 
procedure.
This printers paper cassette cannot automatically detect the paper size. 
Therefore, you need to register the size of the loaded paper.
7Display the Printer Status Window.
For details on methods for displaying the Printer Status Window, see Displaying 
the Printer Status Window, on p. 4-83.
8From the [Options] menu, select [Device Settings]  [Register 
Paper Size...

Loading Paper in the Paper Cassette2-24
Loading and Outputting Paper
2
When you do not perform 2-sided printing, simply click [OK].
NOTE
For details on the procedure for setting the paper size switch lever, see Automatic 
2-sided Printing, on p. 2-46.
Next, configure the printer driver (See p. 2-40).
 

2-25
Loading and Outputting Paper
2
Loading Paper in the Manual Feed Slot
Loading Paper in the Manual Feed Slot
The manual feed slot can be loaded with only a sheet of paper that is 76.2 to 215.9 
mm wide and 127.0 to 355.6 mm long. When printing only a sheet of paper that is 
different in size or type from the one loaded in the paper cassette, load the paper in 
the manual feed slot. Paper that cannot be loaded in a paper cassette such as 
transparency, Index Card, label, and envelope can be loaded in...