Canon Lbp 3300 User Guide

1-6
Before You  Start
1
Parts and Their Functions
jj j j
Face-up Output Slot
Outputs paper with the printed side facing up. 
(See p. 2-15)
Inner View
The following are the parts inside the printer and their functions.
aa a a
Toner Cartridge Guide
When setting the toner cartridge, push it while 
aligning the projections on each side of the toner 
cartridge with this guide. 
(See p. 5-6)
bb b b
Transport Guide
Lift the guide when removing paper jammed inside 
the front cover. (See p. 7-9)
cc c c
Rating...

 
1-7 
Before You  Start
 
1 
Parts and Their Functions 
  
Control Panel
NOTE
 
You can confirm information about the printer status using the Printer Status Window 
from the computer you are using. For details on the Printer Status Window, see Printer 
Status Window (See p. 4-81).
 
* Unlike in the above illustration, the names of the indicators or key are indicated on the control panel 
depending on the country or region.
Also, the panel sheet on which the names of the indicators or key on the control...

1-8
Before You  Start
1
Connecting the Power Cord
Connecting the Power Cord
This section describes the procedure for connecting the power cord. When 
connecting the power cord, see Important Safety Instructions, on p. xvi.
Connecting the Power Cord
IMPORTANT
•Do not plug the power plug into the auxiliary outlet on a computer.
•One AC power outlet should be used exclusively for the printer.
•Do not connect this printer to an uninterruptible power source. This may cause printer 
malfunction or breakdown at...

1-9
Before You  Start
1
Connecting the Power Cord
2Plug the supplied power cord into the power socket.
3Plug the power plug into the AC power outlet.
 

1-10
Before You  Start
1
Turning the Printer ON/OFF
Turning the Printer ON/OFF
The power switch to turn the printer ON or OFF is located on the right side of the 
printer. Be sure to observe the following instructions in order to prevent unexpected 
problems.
Turning the Printer ON
In order to use this printer, you should press   of the power switch to turn the 
printer ON. After running a self-diagnostic test on the printer unit and optional 
accessories, the printer will be ready to print.
IMPORTANT...

1-11
Before You  Start
1
Turning the Printer ON/OFF
All the indicators blink, and the printer initiates a self-diagnostic test on the printer 
unit and optional accessories.
If no abnormality is found during the self-diagnostic test, the   (Ready) indicator 
(green) comes on, and the printer is ready to print.
Turning the Printer OFF
Turn the printer OFF using the following procedure.
IMPORTANT
•If the printer is used on a network, make sure that it is not printing data from another 
computer before...

1-12
Before You  Start
1
Turning the Printer ON/OFF
IMPORTANT
Even if the power switch is turned OFF, power is consumed only slightly while the power 
plug is inserted into the AC power outlet. To cut the power consumption completely, 
unplug the power plug from the AC power outlet.
 

1-13
Before You  Start
1
Connecting to a Computer
Connecting to a Computer
This section describes how to connect the printer to a computer.
As this printer is equipped with a USB connector, you can use a USB cable to 
connect to a computer. By installing the optional network board, the printer can be 
connected directly to the network using a LAN cable.
Using a USB Cable
Connect the printer to a computer equipped with a USB port using a USB cable.
WARNING
When plugging or unplugging the USB cable when...

1-14
Before You  Start
1
Connecting to a Computer
1Make sure that the printer and computer are OFF.
2Open the expansion slot cover.
 

1-15
Before You  Start
1
Connecting to a Computer
3Connect the B-type (square) end of the USB cable to the USB 
connector on the rear side of the printer, then close the 
expansion slot cover.
4Connect the A-type (flat) end of the USB cable to the USB port 
on the computer.