Canon Lbp 3300 User Guide

2-sided Printing2-56
Loading and Outputting Paper
2
2Select [Print] from the [File] menu in the application. Select 
the name of this printer for [Name] or [Printer Name], and then 
click [Properties].
3Display the [Page Setup] sheet, then from [Page Size], select 
the size of a document that you have created with the 
application.
 

2-57
Loading and Outputting Paper
2
2-sided Printing
4From [Output Size], select the size of the loaded paper as 
needed.
Leave the setting at [Match Page Size] when the page size and the size of the 
paper loaded in the manual feed slot are the same, since there is no need to 
change the setting.
IMPORTANT
The print will be automatically reduced or enlarged to fit on the page when the 
settings for [Page Size] and [Output Size] are different.
5Display the [Paper Source] sheet and set [Paper Source] to...

2-sided Printing2-58
Loading and Outputting Paper
2
6Select the paper type specified in [Paper Type].
NOTE
Load paper based on the following [Paper Type] criteria:
*1 If you want to improve the toner fixation when printed with [Heavy Paper 2] selected, select [Heavy
Paper H].
*2 When printing Index Card, the printer automatically applies the appropriate print mode to Index Card
type by specifying [Output Size] in the [Page Setup] sheet.
Paper TypePrinter Driver Setting
Plain paper60 - 74 g/m
2[Plain Paper...

2-59
Loading and Outputting Paper
2
2-sided Printing
7Click [OK] to close the Properties dialog box.
8Click [OK] to start printing.
 

2-sided Printing2-60
Loading and Outputting Paper
2
 

CHAPTER
3-1
3Setting Up the Printing Environment
This chapter describes the procedure for installing the printer driver in a computer and 
specifying the settings for printing from a network computer by sharing the printer on the 
network.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
After Installing the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

3-2Introduction
Setting Up the Printing Environment
3
Introduction
After Installing the Printer
The following shows the tasks that should be performed after installing the printer:
Installing the printer driver
The printer driver is software required for printing from an application you use. Specify the 
print settings in the printer driver. The procedure for installing the printer driver varies 
depending on the system environment.
•When printing with the printer and computer connected with the USB...

3-3Introduction
Setting Up the Printing Environment
3
System Requirements
The following system environment is required to use the printer driver:
Operating system software
•Microsoft Windows 98
•Microsoft Windows Me
•Microsoft Windows 2000 Server/Professional
•Microsoft Windows XP Professional/Home Edition*
•Microsoft Windows Server 2003*
* 32-bit processor version only
- System Requirements (minimum required)
(PC/AT Compatibles)
*1 As the amount of available memory varies depending on the system...

3-4Introduction
Setting Up the Printing Environment
3
Interface
When connecting with USB
•Windows 98/Me: USB Full-Speed (USB1.1 equivalent)
•Windows 2000/XP/Server 2003: USB 2.0 Hi-Speed/USB Full-Speed (USB1.1 
equivalent)
When connecting to a network (Requires the optional network board.)
•Connector: 10BASE-T or 100BASE-TX
•Protocol: TCP/IP
NOTE
•When using Sound, a PC synthesizer (and the driver for PCM synthesizer) must be 
installed in your computer. Do not use a PC Speaker driver (speaker.drv...

3-5Installing the CAPT Software
Setting Up the Printing Environment
3
Installing the CAPT Software
This section describes the procedure for installing the CAPT software when 
connecting this printer to your computer with a USB cable.
There are the following methods for installing the printer driver:
*1 If you want to install the manuals only, see Installing the Manuals, on p. 4-78.
*2 When installing the CAPT software from [Add Printer Wizard], the USB port for connecting this printer has to have...