Canon Lbp 3300 User Guide

3-16Installing the CAPT Software
Setting Up the Printing Environment
3
3Connect the B-type (square) end of the USB cable to the USB 
connector on the printer, then close the expansion slot cover.
4Connect the A-type (flat) end of the USB cable to the USB port 
on the computer.
 

3-17Installing the CAPT Software
Setting Up the Printing Environment
3
5Press   of the power switch to turn the printer ON.
6Turn the computer on and start up Windows 98/Me.
The [Add New Hardware Wizard] dialog box appears.
For Windows  Me
If the following dialog box appears, proceed to Step 7.
If the following dialog box appears, proceed to Step 14.
 

3-18Installing the CAPT Software
Setting Up the Printing Environment
3
For Windows  98
If the following dialog box appears, click [Next], then proceed to Step 7.
If the following dialog box appears, click [Next], then proceed to Step 14.
7Select [Specify the location of the driver (Advanced)], then 
click [Next].
For Windows 98: Select [Search for the best driver for your device. 
(Recommended).], then click [Next].
 

3-19Installing the CAPT Software
Setting Up the Printing Environment
3
8Insert the supplied LBP3300 User Software CD-ROM into 
the CD-ROM drive.
If CD-ROM Setup appears, click [Exit].
9Select [Search for the best driver for your device. 
(Recommended).], clear the [Removable Media (Floppy, CD-
ROM...)] check box, and then select the [Specify a location] 
check box.
For Windows 98: Clear the [Floppy disk drives] check box and the [CD-ROM 
drives] check box, and then select the [Specify a location] check...

3-20Installing the CAPT Software
Setting Up the Printing Environment
3
11Make sure that the folder to be browsed is displayed for 
[Specify a location], and then click [Next].
12Click [Next].
Installation of the USB class driver starts.
13Click [Finish].
The printer is detected automatically. Please wait a moment.
 

3-21Installing the CAPT Software
Setting Up the Printing Environment
3
The [Add New Hardware Wizard] dialog box appears. For Windows 98, click 
[Next].
14Select [Specify the location of the driver (Advanced)], then 
click [Next].
For Windows 98: Select [Search for the best driver for your device. 
(Recommended).], then click [Next].
15If the supplied LBP3300 User Software CD-ROM is not in the 
CD-ROM drive, insert the LBP3300 User Software CD-ROM 
into the CD-ROM drive.
If CD-ROM Setup appears, click...

3-22Installing the CAPT Software
Setting Up the Printing Environment
3
16Select [Search for the best driver for your device. 
(Recommended).], clear the [Removable Media (Floppy, CD-
ROM...)] check box, and then select the [Specify a location] 
check box.
For Windows 98: Clear the [Floppy disk drives] check box and the [CD-ROM 
drives] check box, then select the [Specify a location] check box.
17Click [Browse], then select the folder.
Select [D:\English\Win98_Me], then click [OK].
The CD-ROM drive name...

3-23Installing the CAPT Software
Setting Up the Printing Environment
3
18Make sure that the folder to be browsed is displayed for 
[Specify a location], and then click [Next].
19Click [Next].
20Enter a new name in [Printer name] if you want to change the 
printer name.
NOTE
If another printer driver has already been installed in the computer, the message 
 appears. In this case, select [Yes] or [No].
 

3-24Installing the CAPT Software
Setting Up the Printing Environment
3
21Click [Finish].
Copying files is started.
22When the dialog box for completing the installation appears, 
click [OK].
23Click [Finish].
The installation of the USB class driver and the printer driver is completed.
 

3-25Installing the CAPT Software
Setting Up the Printing Environment
3
For Windows 2000
1Make sure that the printer and computer are OFF.
2Open the expansion slot cover.