Canon Lbp 3300 User Guide

6-6
Optional Accessories
6
Paper Feeder
Installation Space
The dimensions of each part, foot positions, and the space required for using the 
printer with the paper feeder installed are indicated in the following figures:
• Required Peripheral Space
• Foot Positions of the Paper Feeder
• Dimensions of the Printer
The front feet are 7.8 mm high and their top surface is 12 mm square.
The rear feet are 7.8 mm high, the left top surface has a rectangular shape of 
21.7 mm x 40 mm, and the right top surface is...

6-7
Optional Accessories
6
Paper Feeder
 
Removing the Packing Materials
The paper feeder is provided with tape and a packing material to be protected from 
excessive vibrations and shocks during delivery. Remove the tape and packing 
material before installing the paper feeder on the printer.
IMPORTANT
•If there is any packing material remaining inside the paper feeder, this may result in 
misfeeds or damage to the printer when operating the printer. Be sure to remove all the 
packing materials...

6-8
Optional Accessories
6
Paper Feeder
IMPORTANT
Do not touch the black rubber pad (A) in the paper cassette. This may result in 
misfeeds.
2Remove the tape that is securing the packing material in the 
paper cassette (2 locations).
(A)
 

6-9
Optional Accessories
6
Paper Feeder
3Remove the packing material in the paper cassette.
IMPORTANT
The paper cassette is provided with a packing material. Be sure to take out the 
paper cassette to remove the packing material.
4Set the paper cassette in the paper feeder.
Push the paper cassette into the paper feeder firmly until the front side of the 
paper cassette is flush with the front surface of the paper feeder.
 

6-10
Optional Accessories
6
Paper Feeder
 
Moving the Printer
When installing the paper feeder in the printer after installing the printer, move the 
printer to an appropriate location temporarily using the following procedure.
WARNING
Be sure to turn the printer and computer OFF, unplug the power plug, and then 
disconnect all the interface cables from the printer before moving the printer. 
Otherwise, the power cord or interface cables may be damaged, resulting in a 
fire or electrical shock.
CAUTION
Do...

 
6-11 
Optional Accessories
 
6 
Paper Feeder 
2
 
Turn the printer and computer OFF  
a 
, remove the USB cable  
b 
, and then disconnect the power plug from the AC power 
outlet  
c 
. 
3
 
Remove all the interface cables and the power cord from the 
printer. 
4
 
Close the expansion slot cover.
a
a
c
b
 

6-12
Optional Accessories
6
Paper Feeder
5Pull out the paper cassette.
6Move the printer unit from the installation site.
From the front side, securely hold the printer by the lift handles located on the 
lower portion of the printer with both hands.
 

6-13
Optional Accessories
6
Paper Feeder
CAUTION
•This printer weighs approximately 10.8 kg without the paper cassette 
installed. Please be careful not to hurt your back or other portions of your 
body when carrying the printer.
•Be sure not to hold the printer by the front panel, delivery slots, or any 
portions other than the lift handles. If you do so, you may drop the printer, 
resulting in personal injury.
 

6-14
Optional Accessories
6
Paper Feeder•
The back portion (A) of the printer is relatively heavy. Be careful not to get 
off-balanced when lifting the printer. If you do so, you may drop the printer, 
resulting in personal injury.
IMPORTANT
Make sure that the front cover and manual feed slot cover are closed before 
carrying the printer.
 
Installing the Paper Feeder
The paper feeder is to be installed at the bottom of the printer unit.
CAUTION
•Put the printer or paper feeder down slowly and carefully....

6-15
Optional Accessories
6
Paper Feeder
2Place the paper feeder at the installation site.
When carrying the paper feeder, hold the lift handles on both sides with both 
hands as shown in the figure.
IMPORTANT
•Do not touch the connector (A) in the paper feeder. This may result in damage to 
the printer or misfeeds.
•Do not install the paper feeder on a platform that may warp from the weight of the 
printer and optional accessories, or where the printer is liable to sink (such as a 
carpet or mat)....