Canon Ir2025 User Guide

Installation Location and Handling1-7
Before You Start Using This Machine
1
■When carrying the machine, be sure to hold the handles, as indicated below. 
Failure to do so may cause the machine to be dropped, and result in personal 
injury.
Pull out and 
hold these 
handles.Hold these
recessed 
handles..
 

Installation Location and Handling1-8
Before You Start Using This Machine
1
Handling Precautions
■Some parts inside the machine are subject to high-voltages and 
temperatures. Take adequate precautions when inspecting the inside of the 
machine. Do not carry out any inspections not described in this manual.
■Do not attempt to disassemble or modify the 
machine.
■Be careful not to spill liquid or drop any foreign 
objects, such as paper clips or staples inside the 
machine. If a foreign object comes into...

Installation Location and Handling1-9
Before You Start Using This Machine
1
■If there is smoke, or unusual noise, immediately 
turn the main power switch OFF, disconnect the 
power cord from the outlet, and call your local 
authorized Canon dealer. Using the machine in 
this state may cause a fire or electrical shock. 
Also, avoid placing objects around the power 
plug so that the machine can be disconnected 
whenever necessary.
■Do not turn the main power switch OFF or open the front covers while the...

Installation Location and Handling1-10
Before You Start Using This Machine
1
■This machine generates a slight amount of ozone during normal use. 
Although sensitivity to ozone may vary, this amount is not harmful. Ozone 
may be more noticeable during extended use or long production runs, 
especially in poorly ventilated rooms. It is recommended that the room be 
appropriately ventilated, sufficient to maintain a comfortable working 
environment, in areas of machine operation.
■For safety reasons, turn...

What This Machine Can Do1-11
Before You Start Using This Machine
1
What This Machine Can Do
All the elements you will ever need in a digital multitasking 
machine.
The iR2030/iR2025/iR2022i/iR2018i incorporates a rich array 
range of input and output features that can greatly enhance your 
efficiency.
Equipped with features that meet the needs of document work in a 
digitized office, the iR2030/iR2025/iR2022i/iR2018i represents the 
ultimate in digital multitasking machines.
CopyingSee the Copying Guide...

What This Machine Can Do1-12
Before You Start Using This Machine
1
Faxing*See the Sending and Facsimile Guide
This machine’s Super G3 fax function is compatible with most Super G3 fax 
machines used in office environments. If the optional Super G3 FAX Board 
and Fax Driver are installed, you can send facsimiles from your computer.
* The optional Super G3 FAX Board is required.
Printing See the PCL/UFR II Printer Guide or UFR II Printer Guide
This machine uses UFRII LT (Ultra Fast Rendering II LT)...

What This Machine Can Do1-13
Before You Start Using This Machine
1
Using the Remote UISee the Remote UI Guide
You can control functions, such as confirming the status of the 
machine, job operations, and printing instructions, all from your PC’s 
Web browser.
Network ScanningSee the Color Network ScanGear User’s Guide
The Network Scan function enables you to use the iR2030/iR2025/
iR2022i/iR2018i as a conventional scanner. You can scan a 
document using the machine, and read the data in an application...

System Configuration and Parts1-14
Before You Start Using This Machine
1
System Configuration and Parts
Optional Equipment
NOTE
•The Duplex Unit-B1 is standard equipment for the iR2030/iR2025.
•The optional Inner 2 Way Tray-E2 cannot be used with the optional Finisher-U2.
aPlaten Cover Type J
bInner 2 Way Tray-E2
cCassette Feeding Module-P1
(For the iR2018i only)
dCassette Feeding Module-Q1
eDuplex Unit-B1fFeeder (DADF-P2)
gDocument Tray-J1
hCard Reader-E1
iAdditional Finisher Tray-C1
jFinisher-U2
 

System Configuration and Parts1-15
Before You Start Using This Machine
1
External View and Internal View
The iR2022i with the optional Inner 
2 Way Tray-E2 and Cassette Feeding 
Module-Q1 attachedThe iR2022i with the optional Finisher-U2, 
Additional Finisher Tray-C1 and 
Cassette Feeding Module-Q1 attached
aStack Bypass
bMain Control Panel
cFeeder (DADF-P2)dMain Power Switch
ePaper Drawer 1
fPaper Drawer 2 
(Optional equipment for the iR2018i)
aPlaten Glass
bToner Cartridge
cFront Cover
dDrum Unit...

System Configuration and Parts1-16
Before You Start Using This Machine
1
Control Panel Parts and Functions
NOTE
The SEND key is available only if the optional Color Send Kit (standard for the iR2022i/iR2018i) is 
activated and/or the optional Super G3 FAX Board is installed.
abcdef
g
h
i
j k l m n o p q
aCOPY key
Press to use the Copy function. The Copy Basic Features 
screen appears on the touch panel display.
bSEND key
Press to use the Send/Fax function. The Send Basic 
Features screen appears on the...