Canon Ir2025 User Guide

ix
Additional Information
When servicing or adjusting the optical system of the product, be careful not to place 
screwdrivers or other shiny objects in the path of the laser beam. Also, accessories such as 
watches and rings should be removed before working on the product. The reflected beam, even 
though visible or invisible, can permanently damage your eyes.
The labels shown below are attached to the laser scanner unit inside the machine and next to 
the toner cartridge, behind the front cover.
This...

x
International Energy Star-Program
EMC Directive
This equipment conforms with the essential requirements of EC Directive 89/336/EEC.
We declare that this product conforms with the EMC requirements of EC Directive 89/336/EEC 
at nominal mains input 230V, 50Hz although the rated input of the product is 220V-240V, 50/
60Hz.
Use of shielded cable is necessary to comply with the technical requirements of EMC Directive.
WEEE Directive
As an ENERGY STA R Partner, Canon Inc. has determined that 
this product...

xi
IPv6 Ready Logo
Abbreviations Used in This Manual
In this manual, product names and model names are abbreviated as follows:
Microsoft® Windows® 98 operating system: Windows 98
Microsoft
® Windows® Millennium Edition operating system: Windows Me
Microsoft
® Windows® 2000 operating system: Windows 2000
Microsoft
® Windows® XP operating system: Windows XP
Microsoft
® Windows Server® 2003 operating system: Windows Server 2003
Microsoft
® Windows Vista™ operating system: Windows Vista
Microsoft
® Windows®...

xii
 
Copyright
Copyright 2007 by Canon Inc. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means, 
electronic or mechanical, including photocopying and recording, or by any information storage 
or retrieval system without the prior written permission of Canon Inc.
 
Disclaimers
The information in this document is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, 
EITHER EXPRESS OR IMPLIED,...

xiii
Important Safety Instructions
Please read these “Important Safety Instructions” thoroughly before operating the machine. As 
these instructions are intended to prevent injury to the user or other persons or destruction of 
property, always pay attention to these instructions. Also, since it may result in unexpected 
accidents or injuries, do not perform any operation unless otherwise specified in the manual. 
Improper operation or use of this machine could result in personal injury and/or damage...

xiv
 
Power Supply
WARNING
•Do not damage or modify the power cord. Also, do not place heavy objects on the power 
cord, or pull on or excessively bend it, as this could cause electrical damage and result in a 
fire or electrical shock.
•Keep the power cord away from a heat source; failure to do this may cause the power cord 
coating to melt, resulting in a fire or electrical shock.
•Do not connect or disconnect the power cord with wet hands, as this may result in electrical 
shock.
•Do not connect the...

xv
 
Handling
WARNING
•Do not attempt to disassemble or modify the machine. There are high-temperature and 
high-voltage components inside the machine which may result in a fire or electrical shock.
•If the machine makes strange noises, or gives off smoke, heat, or strange smells, 
immediately turn OFF the main power switch, and disconnect the power cord from the power 
outlet. Then, contact your local authorized Canon dealer. Continued use of the machine in 
this condition may result in a fire or...

xvi
•The laser beam can be harmful to human bodies. Since radiation emitted inside the product is 
completely confined within protective housings and external covers, the laser beam cannot 
escape from the machine during any phase of user operation. Read the following remarks and 
instructions for safety.
•If the laser beam escapes from the machine, exposure may cause serious damage to your 
eyes.
•Never open covers other than those instructed in this manual.
•Do not remove the caution labels attached to...

xvii
CAUTION
•The fixing unit, the duplex unit, and their surroundings inside the machine may become hot 
during use. When removing jammed paper or when inspecting the inside of the machine, do 
not touch the fixing unit, the duplex unit, and their surroundings, as doing so may result in 
burns.
•When removing jammed paper or replacing the toner cartridge, take care not to allow the toner 
to come into contact with your hands or clothing, as this will dirty your hands or clothing. If 
they become dirty,...

xviii
 
Consumables
WARNING
•Do not burn or throw used toner cartridges into open flames, as this may cause the toner 
remaining inside the toner cartridges to ignite, resulting in burns or a fire.
•Do not store toner cartridges or copy paper in places exposed to open flames, as this may 
cause the toner or paper to ignite, resulting in burns or a fire.
•When discarding used toner cartridges, put the toner cartridges in a bag to prevent the toner 
remaining inside the toner cartridges from scattering,...