Home > Canon > Printer > Canon Ir Advance C5035i User Guide

Canon Ir Advance C5035i User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Ir Advance C5035i User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							1
    Basic Copy Settings2-59
    2
    Making Copies in the Voice Navigation Mode
    Enlargement
    The available preset copy ratios for 
    enlarging originals are:
    •Maximum (400%)
    *1
    •STMT   11 x 17 (200%)
    • LTR   11 x 17 (129%)
    • LGL   11 x 17 (121%)
    • A5   A3 (200%)
    • A4   A3, B5   B4 (141%)
    • A4   B4, A5   B5 (122%)
    • B4   A3, B5   A4 (115%)
    *1 Only when the original is placed on the  platen glass, depending on the model of 
    the machine you are using.
    1Place your originals.
    NOTE
    For instructions on placing originals, see 
    Placing Originals, on p. 2-20.
     
    						
    							Making Copies in the Voice Navigation Mode
    1
    2
    Basic Copy Settings
    2-60
    2Press   (Back) or   (Next) to 
    move the focus to [Copy Ratio]   
    press  (Select).
    The voice guide announces that the 
    Copy Ratio setting screen is displayed.
    IMPORTANT
    Make sure that you select a paper size 
    [Auto] in the Select Paper setting screen.
     
    						
    							1
    Basic Copy Settings2-61
    2
    Making Copies in the Voice Navigation Mode
    3Press   (Back) or   (Next) to 
    move the focus over the desired 
    preset copy ratio  press 
     (Select).
    4Press  (Con firm).
    The display returns to the Regular Copy 
    Basic Features screen.
     
    						
    							Making Copies in the Voice Navigation Mode
    1
    2
    Basic Copy Settings
    2-62
    5Press  (Start).
    Copying starts.
    NOTE
    •To return the copy ratio to 100%, move 
    the focus to [Direct(100%)]/[1:1(100%)] 
     press   (Select).
    •To cancel all settings and return the 
    machine to the Standard mode, press 
     (Reset).
    Zoom by Percentage
    You can reduce or enlarge originals by any 
    copy ratio in 1% increments. The available 
    copy ratios are from 25% to 400%. The same 
    copy ratio is used for the horizontal (X) and 
    vertical (Y) axes.
    Set the zoom ratio in 1% increments with the 
    following procedure.
    1Place your originals.
    NOTE
    For instructions on placing originals, see 
    Placing Originals, on p. 2-20.
     
    						
    							1
    Basic Copy Settings2-63
    2
    Making Copies in the Voice Navigation Mode
    2Press   (Back) or   (Next) to 
    move the focus to [Copy Ratio]   
    press  (Select).
    The voice guide announces that the 
    Copy Ratio setting screen is displayed.
    3Press   (Back) or   (Next) to 
    move the focus over the custom copy 
    ratio   press   (Select).
    The voice guide announces that the 
    machine has entered the mode for 
    entering numeric values.
    4Enter the desired zoom ratio 
    percentage using   -    (numeric  
    keys)   press   (Con firm).
    The voice guide announces that the ratio 
    you have entered.
     
    						
    							Making Copies in the Voice Navigation Mode
    1
    2
    Basic Copy Settings
    2-64
    5Press  (Con firm) until you return 
    to the Copy Basic Features screen.
    NOTE
    If you enter a value outside the setting 
    range, you will hear a voice message 
    prompting you to enter an appropriate 
    value.
    6Press  (Start).
    Copying starts.
    NOTE
    •To return the copy ratio to 100%, move 
    the focus to [Direct(100%)]/[1:1(100%)] 
     press  (Select).
    •To cancel all settings and return the 
    machine to the Standard mode, press   (Reset).
     
    						
    							1
    Basic Copy Settings2-65
    2
    Making Copies in the Voice Navigation Mode
    Auto Zoom
    You can set the machine to automatically 
    select the appropriate copy ratio based on the 
    size of the original and the selected copy 
    paper. The same copy ratio is used for the 
    horizontal (X) and vertical (Y) axes. The 
    available copy ratios are from 25% to 400%.
    IMPORTANT
    •You cannot copy highly transparent 
    originals, such as transparencies, using the 
    Auto setting on the Copy Ratio screen. Use 
    the Preset Zoom or Zoom by Percentage 
    mode instead.
    •To use the Auto setting on the Copy Ratio 
    screen, your originals must conform to one 
    of the standard paper sizes: 11 x 17, LGL, 
    LTR, LTRR, STMT, or STMTR/A3, B4, A4, 
    A4R, B5, B5R, A5, A5R, or B6, or B6R
    (You can place B6 only on the platen glass. 
    You can place the B6R and A5R only into 
    the feeder.)
     
    						
    							Making Copies in the Voice Navigation Mode
    1
    2
    Basic Copy Settings
    2-66
    1Place your originals.
    NOTE
    For instructions on placing originals, see 
    Placing Originals, on p. 2-20.
    2Press   (Back) or   (Next) to 
    move the focus to [Copy Ratio]   
    press  (Select).
    If necessary, see the screen shot in step 
    2 of Preset Zoom, on p. 2-57.
    The voice guide announces that the 
    Copy Ratio setting screen is displayed.
    IMPORTANT
    Make sure that you select a paper size 
    other than [Auto]. If you do not select a 
    paper size, the copy ratio is automatically 
    set to match the size of the paper loaded 
    in Paper Drawer 1.
     
    						
    							1
    Basic Copy Settings2-67
    2
    Making Copies in the Voice Navigation Mode
    3Press   (Back) or   (Next) to 
    move the focus to [Auto]   press 
     (Select).
    4Press  (Con firm). 
    The display returns to the Regular Copy 
    Basic Features screen.
    5Press  (Start).
    Copying starts.
     
    						
    							Making Copies in the Voice Navigation Mode
    1
    2
    Basic Copy Settings
    2-68
    NOTE
    •If the original is placed on the platen 
    glass, the copy ratio automatically 
    appears when the feeder is closed, 
    provided that the original size can be 
    detected.
    •If the original is placed in the feeder, the 
    copy ratio appears when   (Start) is 
    pressed.
    •To return the copy ratio to 100%, move 
    the focus to [Direct(100%)]/[1:1(100%)] 
     press   (Select).
    •To cancel all settings and return the 
    machine to the Standard mode, press 
     (Reset).
    Collating Copies
    The Finishing modes can be selected to 
    collate the copies in various ways, either by 
    pages or copy sets.
    There are three Finishing modes that are 
    supported by the Voice Navigation mode: 
    Collate, Group, and Staple.
     
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Ir Advance C5035i User Guide