Canon Ir 2200 User Guide

Feeder (DADF-H1)7-33
7-337-33 7-33
7
77 7
Handling Options
3
33 3Push the new stamp car tr idge in until it clicks, using tweezers.
Push the new stamp car tr idge in until it clicks, using tweezers.Push the new stamp car tr idge in until it clicks, using tweezers. Push the new stamp car tr idge in until it clicks, using tweezers.
IMPORTANT

 Make sure that the stamp cartridge is not protruding from the surface.

 Set the stamp cartridge properly, or it may cause paper jams.
4
44 4Gently close the...

Finisher-J17-34
7-347-34 7-34
Handling Options
7
77 7
Finisher-J1
Finisher-J1Finisher-J1 Finisher-J1
The Finisher-J1 is equipped with the following functions: Collate, Group, Offset, and Staple 
modes. (See ‘Finishing Functions,’ on p. 7-35.)
IMPORTANT

 When the machine is operating in the Transparency Interleaving mode, the Collate, Group, or Staple 
mode cannot be set .
NOTE

 When feeding large-size paper, such as A3, or A4R, pull out the auxiliary tray.
Par ts and Their Functions
Par ts and...

Finisher-J17-35
7-357-35 7-35
7
77 7
Handling Options
Finishing Functions
Finishing FunctionsFinishing Functions Finishing Functions
The Finisher-J1 is equipped with the following functions:
nCollate Mode
Collate ModeCollate Mode Collate Mode
This function automatically collates print sets into page order before they are delivered.
n
Group Mode
Group ModeGroup Mode Group Mode
This function outputs all prints of the same page in one set, and slightly shifts the output 
position of print sets to make them...

Finisher-J17-36
7-367-36 7-36
7
77 7
Handling Options
IMPORTANT

 The output tray moves down when each set of paper is delivered. When the delivered paper reaches 
the stacking limit of the tray, or after 30 sets of prints have been delivered, printing stops temporarily. 
Remove all the paper from the output tray, and the remaining printing and stapling will restart.

 You cannot staple heavyweight paper, envelopes, transparencies, labels, tracing paper, or 
letterheads.

 The following paper...

Finisher-J17-37
7-377-37 7-37
7
77 7
Handling Options
Clearing Paper Jams in the Finisher-J1
Clearing Paper Jams in the Finisher-J1Clearing Paper Jams in the Finisher-J1 Clearing Paper Jams in the Finisher-J1
If a paper jam occurs when using the finisher, a screen similar to the one shown below appears 
on the touch panel display. Check where the jam occurred, and follow the procedure described 
below and the procedure that appears on the touch panel display, to remove the jammed paper.
CAUTION...

Finisher-J17-38
7-387-38 7-38
7
77 7
Handling Options
2
22 2Remove any jammed paper.
Remove any jammed paper.Remove any jammed paper. Remove any jammed paper.
3
33 3Lift the inner guide, and remove any jammed paper.
Lift the inner guide, and remove any jammed paper.Lift the inner guide, and remove any jammed paper. Lift the inner guide, and remove any jammed paper.
4
44 4Close the upper left cover of the finisher.
Close the upper left cover of the finisher.Close the upper left cover of the finisher....

Finisher-J17-39
7-397-39 7-39
7
77 7
Handling Options
5
55 5Open the front cover of the finisher.
Open the front cover of the finisher.Open the front cover of the finisher. Open the front cover of the finisher.
6
66 6Remove any jammed paper.
Remove any jammed paper.Remove any jammed paper. Remove any jammed paper.
7
77 7Close the front cover of the finisher.
Close the front cover of the finisher.Close the front cover of the finisher. Close the front cover of the finisher.
CAUTION
CAUTIONCAUTION CAUTION...

Finisher-J17-40
7-407-40 7-40
7
77 7
Handling Options
8
88 8Follow the instructions in the touch panel display.
Follow the instructions in the touch panel display.Follow the instructions in the touch panel display. Follow the instructions in the touch panel display.
NOTE

 For details of the screen indicating how to remove the paper jam, see ‘Screen Shown When There Is 
a Paper Jam,’ on p. 6-2.
Replacing the Staple Case in the Stapler Unit
Replacing the Staple Case in the Stapler UnitReplacing the...

Finisher-J17-41
7-417-41 7-41
7
77 7
Handling Options
2
22 2Pull out the staple car tridge, holding it by its left and right sides.
Pull out the staple car tridge, holding it by its left and right sides.Pull out the staple car tridge, holding it by its left and right sides. Pull out the staple car tridge, holding it by its left and right sides.
3
33 3Pull out the empty staple case, holding it by its left and right sides.
Pull out the empty staple case, holding it by its left and right sides.Pull out the...

Finisher-J17-42
7-427-42 7-42
7
77 7
Handling Options
NOTE

 Only one staple case can be inserted at a time.
5
55 5Remove the seal fixing the staples by pulling it straight out.
Remove the seal fixing the staples by pulling it straight out.Remove the seal fixing the staples by pulling it straight out. Remove the seal fixing the staples by pulling it straight out.
6
66 6Gently push the staple car tridge back into the finisher. 
Gently push the staple car tridge back into the finisher. Gently push the...