Canon Ir 2200 User Guide

Finisher-J17-43
7-437-43 7-43
7
77 7
Handling Options
CAUTION
CAUTIONCAUTION CAUTION

 When closing the cover, be careful not to get your fingers caught, as this may result in 
When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in  When closing the cover, be careful not to get your fingers caught, as this may result in 
personal injur y.
personal injur y.personal injur y....

Finisher-J17-44
7-447-44 7-44
7
77 7
Handling Options
2
22 2Pull out the protruding staple car tridge, holding it by its left and right sides.
Pull out the protruding staple car tridge, holding it by its left and right sides.Pull out the protruding staple car tridge, holding it by its left and right sides. Pull out the protruding staple car tridge, holding it by its left and right sides.
3
33 3Lower the knob of the staple car tridge.
Lower the knob of the staple car tridge.Lower the knob of the staple...

Finisher-J17-45
7-457-45 7-45
7
77 7
Handling Options
5
55 5Return the knob of the staple car tridge to its original position.
Return the knob of the staple car tridge to its original position.Return the knob of the staple car tridge to its original position. Return the knob of the staple car tridge to its original position.
6
66 6Push the staple car tridge back firmly into the finisher.
Push the staple car tridge back firmly into the finisher.Push the staple car tridge back firmly into the finisher....

Finisher-J17-46
7-467-46 7-46
7
77 7
Handling Options
NOTE

 When you close the cover, the stapler unit automatically performs a “dry” stapling operation several 
times to reposition the staples.
Consumables
ConsumablesConsumables Consumables
Use only the staple cases recommended for use in this machine. 
NOTE

 We recommend that you order staple cases from your service representative before the machine 
runs out of them.
 

Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-47
7-477-47 7-47
Handling Options
7
77 7
Saddle Finisher-G1/Puncher Unit-J1/
Saddle Finisher-G1/Puncher Unit-J1/Saddle Finisher-G1/Puncher Unit-J1/ Saddle Finisher-G1/Puncher Unit-J1/
Puncher Unit-G1 
Puncher Unit-G1 Puncher Unit-G1  Puncher Unit-G1 
The Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G1 is equipped with the following 
functions: Collate, Group, Offset, Staple, Saddle Stitch, and Hole Punch modes. (See ‘Finishing 
Functions,’ on p....

Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-48
7-487-48 7-48
7
77 7
Handling Options
Finishing Functions
Finishing FunctionsFinishing Functions Finishing Functions
The Saddle Finisher-G1, Puncher Unit-J1 and Puncher Unit-G1 are equipped with the following 
functions:
nCollate Mode
Collate ModeCollate Mode Collate Mode
This function automatically collates print sets into page order before they are delivered.
nGroup Mode
Group ModeGroup Mode Group Mode
This function outputs all prints of the same...

Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-49
7-497-49 7-49
7
77 7
Handling Options
NOTE

 Copies are stapled in the following places:
- When an original is placed on the platen glass:
- When originals are placed in the feeder:

 If the number of sheets in one set exceeds 25 (for A3 size) or 50 (for A4 and A4R size), stapling will 
not be performed. Only Collating will be performed.

 If the machine stops during stapling and  is displayed, it means that almost all of the 
staples...

Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-50
7-507-50 7-50
7
77 7
Handling Options
nSaddle Stitching Mode
Saddle Stitching ModeSaddle Stitching Mode Saddle Stitching Mode
This function enables you to make booklets, consisting of pages folded and stapled at the 
centre.
IMPORTANT

 The maximum number of sheets that can be saddle stitched is 10 (40 pages).

 The paper sizes that can be saddle stitched are A3 and A4R.

 To perform Saddle Stitching A3, pull out the auxiliary tray of the...

Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-51
7-517-51 7-51
7
77 7
Handling Options
NOTE

 The hole punched area is shown below.

 The distance between the punch holes is shown in the illustration below.
Feeder
FeederFeeder Feeder
Hole punched 
area
Hole punched 
areaHole punched 
area Hole punched 
area
Platen glass
Platen glassPlaten glass Platen glass
When the Puncher Unit-G1 is 
When the Puncher Unit-G1 is When the Puncher Unit-G1 is  When the Puncher Unit-G1 is 
attached....

Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G17-52
7-527-52 7-52
7
77 7
Handling Options
Clearing Paper Jams in the Saddle Finisher-G1
Clearing Paper Jams in the Saddle Finisher-G1Clearing Paper Jams in the Saddle Finisher-G1 Clearing Paper Jams in the Saddle Finisher-G1
If a paper jam occurs when using the finisher, a screen similar to the one shown below appears 
on the touch panel display. Check where the jam occurred, and follow the procedure described 
below and the procedure that appears on the...