Canon Ir 2200 User Guide

Paper Deck-L17-13
7-137-13 7-13
7
77 7
Handling Options
2
22 2Open a package of paper, and remove the paper stack. 
Open a package of paper, and remove the paper stack. Open a package of paper, and remove the paper stack.  Open a package of paper, and remove the paper stack. 
CAUTION
CAUTIONCAUTION CAUTION

 When loading paper, take care not to cut your hands on the edges of the paper.
When loading paper, take care not to cut your hands on the edges of the paper.When loading paper, take care not to...

Paper Deck-L17-14
7-147-14 7-14
7
77 7
Handling Options
IMPORTANT

 If the paper is curled, curl it down before placing it in the paper drawer.

 Make sure that the height of the paper stack does not exceed the limit mark ( ) at the back of the 
paper drawer.

 Rewrap any remaining paper in its original package, and store it in a dry place, away from direct 
sunlight.

 Do not load the following types of paper in the paper drawer. Doing so may cause a paper jam.
- Severely curled or...

Envelope Feeder Attachment-B17-15
7-157-15 7-15
Handling Options
7
77 7
Envelope Feeder Attachment-B1
Envelope Feeder Attachment-B1Envelope Feeder Attachment-B1 Envelope Feeder Attachment-B1
Par ts and Their Functions
Par ts and Their FunctionsPar ts and Their Functions Par ts and Their Functions
When the Envelope Feeder Attachment is attached to Paper Drawer 1:
C AB
E D
A
AA ALeft guide
Left guideLeft guide Left guide
Align to the length of envelopes being loaded.
B
BB BEnvelope receptacle
Envelope...

Envelope Feeder Attachment-B17-16
7-167-16 7-16
7
77 7
Handling Options
How to Use the Envelope Feeder Attachment
How to Use the Envelope Feeder AttachmentHow to Use the Envelope Feeder Attachment How to Use the Envelope Feeder Attachment
The following six types of envelopes can be loaded into the Envelope Feeder Attachment: 
COM10, Monarch, DL, ISO-B5, ISO-C5 and Yougata 4. The main unit and the Envelope Feeder 
Attachment are set so that COM10 envelopes can be loaded without any adjustment.
When using...

Envelope Feeder Attachment-B17-17
7-177-17 7-17
7
77 7
Handling Options

  The main unit and the Envelope Feeder Attachment are set so that COM10 envelopes can be 
loaded without any adjustment.  The guide sizes can be changed so that the following envelopes 
can be loaded. Using envelopes other than these can result in paper jams, dirty prints, and the 
inside of the machine becoming dirty.
- COM10: Mailwell No.553
- Monarch: Mailwell No.582
- DL: Mailwell/Schneidersöne No.11345
- Yougata 4: Uzumaki...

Envelope Feeder Attachment-B17-18
7-187-18 7-18
7
77 7
Handling Options
2
22 2Place the envelopes on a clean, level surface and spread them out by hand 
Place the envelopes on a clean, level surface and spread them out by hand Place the envelopes on a clean, level surface and spread them out by hand  Place the envelopes on a clean, level surface and spread them out by hand 
in the directions of the arrows.
in the directions of the arrows.in the directions of the arrows. in the directions of the arrows....

Envelope Feeder Attachment-B17-19
7-197-19 7-19
7
77 7
Handling Options
IMPORTANT

 Do not print on the underside of the envelopes (the side with the flap).

 If the envelopes become filled with air, flatten them by hand before loading them in the envelope 
feeder attachment.
Loading Envelopes
Loading EnvelopesLoading Envelopes Loading Envelopes
This section explains how to load envelopes in the drawer.
1
11 1Press and release the button of the paper drawer in which you want to load 
Press and...

Envelope Feeder Attachment-B17-20
7-207-20 7-20
7
77 7
Handling Options
2
22 2Grip the handle and pull out the paper drawer until it stops.
Grip the handle and pull out the paper drawer until it stops.Grip the handle and pull out the paper drawer until it stops. Grip the handle and pull out the paper drawer until it stops.
3
33 3Squeeze the lever on the left guide, as shown below, and pull out the left 
Squeeze the lever on the left guide, as shown below, and pull out the left Squeeze the lever on the...

Envelope Feeder Attachment-B17-21
7-217-21 7-21
7
77 7
Handling Options
Load the envelopes in the direction shown below.
Align the leading edges of the envelopes, and make sure that they are held in place under the claw.
IMPORTANT

 If any envelopes are curled, flatten them out before placing them in the envelope cassette.

 When the Saddle Finisher-G1 is attached, print by setting the Image Orientation Priority to “Off” in 
the Additional Functions screen.

 Do not allow the number of...

Envelope Feeder Attachment-B17-22
7-227-22 7-22
7
77 7
Handling Options
5
55 5Squeeze the lever on the left guide, and set the left guide at the trailing edge 
Squeeze the lever on the left guide, and set the left guide at the trailing edge Squeeze the lever on the left guide, and set the left guide at the trailing edge  Squeeze the lever on the left guide, and set the left guide at the trailing edge 
of the envelopes.
of the envelopes.of the envelopes. of the envelopes.
6
66 6Gently slide the paper...