Canon Ir 2200 User Guide

Adjusting the Machine (Adjustment/Cleaning)3-41
3-413-41 3-41
3
33 3
Selecting and Storing Settings to Suit your Needs
3
33 3Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Changing the Saddle Stitch Position
Changing the Saddle Stitch PositionChanging the Saddle Stitch Position Changing the Saddle Stitch Position
When the Saddle Finisher-G1 is attached, slight position differences in the saddle...

Adjusting the Machine (Adjustment/Cleaning)3-42
3-423-42 3-42
3
33 3
Selecting and Storing Settings to Suit your Needs
3
33 3Use “
Use “Use “ Use “t” or “
” or “” or “ ” or “s” to adjust the saddle stitch position, and press “OK.”
” to adjust the saddle stitch position, and press “OK.”” to adjust the saddle stitch position, and press “OK.” ” to adjust the saddle stitch position, and press “OK.”
The setting range is from –2.0mm to +2.0mm, in 0.25mm increments.
4
44 4Press “Done.”
Press “Done.”Press...

Adjusting the Machine (Adjustment/Cleaning)3-43
3-433-43 3-43
3
33 3
Selecting and Storing Settings to Suit your Needs
2
22 2Press “Light” or “Dar k” to adjust the exposure, and press “OK.”
Press “Light” or “Dar k” to adjust the exposure, and press “OK.”Press “Light” or “Dar k” to adjust the exposure, and press “OK.” Press “Light” or “Dar k” to adjust the exposure, and press “OK.”
3
33 3Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display...

Adjusting the Machine (Adjustment/Cleaning)3-44
3-443-44 3-44
3
33 3
Selecting and Storing Settings to Suit your Needs
2
22 2Select “On” or “Off,”and press “OK.”
Select “On” or “Off,”and press “OK.”Select “On” or “Off,”and press “OK.” Select “On” or “Off,”and press “OK.”
To disable Staple/Offset, press “Off.”
To enable Staple/Offset, press “On.”
3
33 3Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features...

Printing Reports (Report Settings)3-45
3-453-45 3-45
Selecting and Storing Settings to Suit your Needs
3
33 3
Printing Repor ts 
Printing Repor ts Printing Repor ts  Printing Repor ts (Repor t Settings)
(Repor t Settings)(Repor t Settings) (Repor t Settings)
You can print the contents of the fax, network, and the printer settings. These reports are useful 
when you check the current settings.
NOTE
•
•• •“Report Settings” is displayed only when any of Network Interface Adapter, Printer Kit and FAX 
Board...

Printing Reports (Report Settings)3-46
3-463-46 3-46
3
33 3
Selecting and Storing Settings to Suit your Needs
3
33 3Press “Address Book List 1.”
Press “Address Book List 1.”Press “Address Book List 1.” Press “Address Book List 1.”
4
44 4Press “Yes.”
Press “Yes.”Press “Yes.” Press “Yes.”
If you do not want to print, press “No.”
The screen below appears, and printing starts.
When printing is completed,  appears.
To close the screen while printing, press “Done.”
NOTE
•
•• •To cancel printing, press...

Printing Reports (Report Settings)3-47
3-473-47 3-47
3
33 3
Selecting and Storing Settings to Suit your Needs
5
55 5Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Printing the User’s Data List in the Network Settings
Printing the User’s Data List in the Network SettingsPrinting the User’s Data List in the Network Settings Printing the User’s Data List in the Network Settings
You can print the...

Printing Reports (Report Settings)3-48
3-483-48 3-48
3
33 3
Selecting and Storing Settings to Suit your Needs
3
33 3Press “User’s Data List.”
Press “User’s Data List.”Press “User’s Data List.” Press “User’s Data List.”
4
44 4Press “Yes.”
Press “Yes.”Press “Yes.” Press “Yes.”
If you do not want to print, press “No.”
The screen below appears, and printing starts.
When printing is completed,  appears.
To close the screen while printing, press “Done.”
NOTE
•
•• •To cancel printing, press “Cancel.”...

Printing Reports (Report Settings)3-49
3-493-49 3-49
3
33 3
Selecting and Storing Settings to Suit your Needs
5
55 5Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Printing the Contents of the Printer Settings
Printing the Contents of the Printer SettingsPrinting the Contents of the Printer Settings Printing the Contents of the Printer Settings
When the Printer Kit is attached, you can print the...

Printing Reports (Report Settings)3-50
3-503-50 3-50
3
33 3
Selecting and Storing Settings to Suit your Needs
4
44 4Press “Yes.”
Press “Yes.”Press “Yes.” Press “Yes.”
If you do not want to print, press “No.”
When printing is completed, the screen returns to step 3.
5
55 5Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
;ownloadedyfromyXanuals'rinterScomyXanuals