Canon Ir 2200 User Guide

Setting Specifications That Are Common to Each Function (Common Settings)3-11
3-113-11 3-11
3
33 3
Selecting and Storing Settings to Suit your Needs
Setting Entr y Tone, Error Tone, and Job Done Tone
Setting Entr y Tone, Error Tone, and Job Done ToneSetting Entr y Tone, Error Tone, and Job Done Tone Setting Entr y Tone, Error Tone, and Job Done Tone
You can select whether or not to sound audible tones. The following tones sound at the following 
times:
• Entry Tone: When pressing keys on the control...

Setting Specifications That Are Common to Each Function (Common Settings)3-12
3-123-12 3-12
3
33 3
Selecting and Storing Settings to Suit your Needs
Setting Inch Input
Setting Inch InputSetting Inch Input Setting Inch Input
You can display the key for entering values in inches in the numeric entry screens.
NOTE
•
•• •The default setting is “Off.”
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as...

Setting Specifications That Are Common to Each Function (Common Settings)3-13
3-133-13 3-13
3
33 3
Selecting and Storing Settings to Suit your Needs
Setting a Paper Drawer for Auto Paper Selection/
Setting a Paper Drawer for Auto Paper Selection/Setting a Paper Drawer for Auto Paper Selection/ Setting a Paper Drawer for Auto Paper Selection/
Auto Drawer Switching
Auto Drawer SwitchingAuto Drawer Switching Auto Drawer Switching
You can set the paper drawers to be used for Automatic Paper Selection and...

Setting Specifications That Are Common to Each Function (Common Settings)3-14
3-143-14 3-14
3
33 3
Selecting and Storing Settings to Suit your Needs
3
33 3Select “On” or “Off ” for the stack bypass and each paper drawer, and press 
Select “On” or “Off ” for the stack bypass and each paper drawer, and press Select “On” or “Off ” for the stack bypass and each paper drawer, and press  Select “On” or “Off ” for the stack bypass and each paper drawer, and press 
“OK.”
“OK.”“OK.” “OK.”
To make the paper drawer...

Setting Specifications That Are Common to Each Function (Common Settings)3-15
3-153-15 3-15
3
33 3
Selecting and Storing Settings to Suit your Needs
NOTE
•
•• •When you select “Copy,” you can specify whether or not to set priority to paper type.
- When you set “Consider Paper Type” to “On,” paper will not be fed even when paper runs out during 
printing, unless other loaded paper matches the size and type. For details of stored paper types, see 
‘Identifying the Type of Paper in a Paper Drawer,’ on p....

Setting Specifications That Are Common to Each Function (Common Settings)3-16
3-163-16 3-16
3
33 3
Selecting and Storing Settings to Suit your Needs
3
33 3Select the paper type loaded in the paper drawer, and press “OK.”
Select the paper type loaded in the paper drawer, and press “OK.”Select the paper type loaded in the paper drawer, and press “OK.” Select the paper type loaded in the paper drawer, and press “OK.”
Load the same type of paper as set in each paper drawer.
NOTE
•
•• •For details of paper...

Setting Specifications That Are Common to Each Function (Common Settings)3-17
3-173-17 3-17
3
33 3
Selecting and Storing Settings to Suit your Needs
4
44 4Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
NOTE
•
•• •The paper types stored here are displayed when selecting paper in each mode, as shown below.
;ownloadedyfromyXanuals'rinterScomyXanuals 

Setting Specifications That Are Common to Each Function (Common Settings)3-18
3-183-18 3-18
3
33 3
Selecting and Storing Settings to Suit your Needs
Setting the Functions Keys as Keys to Reactivate 
Setting the Functions Keys as Keys to Reactivate Setting the Functions Keys as Keys to Reactivate  Setting the Functions Keys as Keys to Reactivate 
the Machine
the Machinethe Machine the Machine
Yo u   c a n   s e t ( C o p y) , (Fax), (Mail Box), and (System) as the keys to 
reactivate the machine from the...

Setting Specifications That Are Common to Each Function (Common Settings)3-19
3-193-19 3-19
3
33 3
Selecting and Storing Settings to Suit your Needs
Setting the Energy Consumption in the Sleep Mode
Setting the Energy Consumption in the Sleep ModeSetting the Energy Consumption in the Sleep Mode Setting the Energy Consumption in the Sleep Mode
You can set the amount of energy consumed when the machine is in the Sleep mode.
NOTE
•
•• •In the following cases, the energy consumption when the machine enters...

Setting Specifications That Are Common to Each Function (Common Settings)3-20
3-203-20 3-20
3
33 3
Selecting and Storing Settings to Suit your Needs
Distinguishing LTRR-size and STMT-size Originals
Distinguishing LTRR-size and STMT-size OriginalsDistinguishing LTRR-size and STMT-size Originals Distinguishing LTRR-size and STMT-size Originals
You can designate the way the machine handles LTRR-size or STMT-size originals placed on the 
platen glass.
NOTE
•
•• •The default setting is “Use LTRR Format.”
1
11...