Canon Imagerunner 2318 User Guide

CHAPTER
1-1
1
Before You Start Using This 
Machine
This chapter describes what you should know before using this machine, such as parts and 
their functions, and how to turn ON the main power.
Installation Location and Handling  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Installation Precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Handling Precautions . . . . . . . . . . . . . . ....

Installation Location and Handling1-2
Before You Start Using This Machine
1
Installation Location and Handling
This section describes precautions for installation location and handling. We 
recommend that you read this section prior to using this machine.
Installation Precautions
Avoid Installing the Machine in the Following Locations
■Avoid locations subject to temperature 
and humidity extremes, whether low or 
high.
For example, avoid installing the machine near 
water faucets, hot water heaters,...

Installation Location and Handling1-3
Before You Start Using This Machine
1
■Avoid poorly ventilated locations.
This machine generates a slight amount of ozone 
during normal use. Although sensitivity to ozone 
may vary, this amount is not harmful. Ozone may 
be more noticeable during extended use or long 
production runs, especially in poorly ventilated 
rooms. It is recommended that the room be 
appropriately ventilated, sufficient to maintain a 
comfortable working environment, in areas of 
machine...

Installation Location and Handling1-4
Before You Start Using This Machine
1
Select a Safe Power Supply
■Avoid locations where a considerable amount of dust accumulates.
■Avoid locations near volatile or flammable materials, such as alcohol or 
paint thinner.
■Avoid installing the machine near computers or other precision electronic 
equipment.
Electrical interference and vibrations generated by the machine during printing can 
adversely affect the operation of such equipment.
■Avoid installing the...

Installation Location and Handling1-5
Before You Start Using This Machine
1
Provide Adequate Installation Space
■Provide enough space on each side of the machine for unrestricted 
operation.
The optional Finisher-U2 and Document Tray-J1 are attached.
100 mm or more
1,198 mm
1,249 mm
1,247 mm *
* The width is 1,018 mm when no options are attached, or 1,247 mm when the optional Document Tray-J1 is attached.
 

Installation Location and Handling1-6
Before You Start Using This Machine
1
Moving the Machine
■If you intend to move the machine, even to a location on the same floor of 
your building, contact your local authorized Canon dealer beforehand.
■The machine is heavy, and requires two or more people to lift it. Therefore, 
do not attempt to move it by yourself. Doing so, may result in personal 
injury.
■When carrying the machine, be sure to hold the handles, as indicated 
below. Failure to do so, may cause...

Installation Location and Handling1-7
Before You Start Using This Machine
1
Handling Precautions
■Do not attempt to disassemble or modify 
the machine.
■Be careful not to spill liquids or drop any 
foreign objects, such as paper clips or 
staples inside the machine. If a foreign 
object comes into contact with electrical 
parts inside the machine, it may cause a 
short circuit and result in a fire or 
electrical shock.
■If there is smoke or unusual noise, 
immediately turn the main power 
switch OFF,...

Installation Location and Handling1-8
Before You Start Using This Machine
1
■Do not use flammable sprays, such as 
spray glue near the machine. There is a 
danger of ignition.
■For safety reasons, turn OFF the control 
panel power switch of the machine when 
it will not be used for a long period of 
time, such as overnight. As an added 
safety measure, turn OFF the main power 
switch, and disconnect the power cord 
when the machine will not be used for an 
extended period of time, such as during...

Parts and Their Functions1-9
Before You Start Using This Machine
1
Parts and Their Functions
This section provides you with the names and functions of all of the parts on the 
outside and inside of the main unit and control panel. Illustrations of the machine 
with some optional equipment attached to it are also provided. For more 
information on the optional equipment, parts and their functions, see Chapter 5, 
“Optional Equipment,” in the Reference Guide.
External View
The imageRUNNER 2320 with the...

Parts and Their Functions1-10
Before You Start Using This Machine
1
NOTE
For more information on the optional equipment that can be attached to the machine, see 
Chapter 5, “Optional Equipment,” in the Reference Guide.
aStack Bypass
Use the stack bypass to feed paper manually, and for loading nonstandard paper stock, such 
as envelopes. (See Chapter 2, “Basic 
Operations,” in the Reference Guide.)
bControl Panel
Includes the keys, LCD display, and indicators 
required for operating the machine. (See...