Canon Imageprograf Ipf825 User Guide

Print Quality
Select a print quality to suit the print job. Setting
Details
Highest Gives priority to the highest possible image quality.
High Prints images of high quality.
Standard Balances quality with the need for faster printing.
Draft Gives priority to high speed printing.Note
• The availability of settings is determined by the media type and print priority selections. Color Mode
You can select a color mode to suit the print job.
Setting
Details
Color Enables color printing.
Monochrome Disables...

Adj. Pale Color Recognizable
When you place a checkmark here, yellow or cyan lines or other portions of images that are difficult to see when printed in
white space can become easier to see. Economy Printing
You can reduce the amount of ink consumed for printing by placing a checkmark here. Increase image print speed (AutoCAD2011 only)
When you print with the resolution configured to 600dpi, you can print data including raster images even faster.
However, image quality may deteriorate if high-resolution...

Note
• The settings in the  Paper Detailed Settings dialog box are temporary; after the print job finishes the settings
of the printer operation panel are restored. Drying Time
Between Pages
This sets the wait time for the ink to dry between each completely printed sheet and the output of the sheet. Setting
Details
Printer Default The settings of the printer operating panel are applied.
None The paper is ejected immediately after printing.
30sec. / 1min. / 3min. /  5min. /
10min. / 30min. / 60min. The...

Setting
Details
Printer Default The settings of the printer operating panel are applied.
Fast Select this setting if cutting with the Standard setting is not clean.
Standard Select this setting when you are not experiencing problems.
Slow Select this setting if cutting with the Standard setting is not clean. Output Method Dialog Box
Output Method dialog box appears when you click  Output Method button on the Main sheet in the Custom Properties
dialog box. You can specify the output method for HDI Driver....

Important
• The color and quality of the specified model cannot be perfectly matched. Color Compatibility
Color settings and compatible models are listed below. Color settings
Compatible models
Color (CAD) 1 Standard
Color (CAD) 2 Color (CAD) Light
Color (CAD) 3 Canon BJ-W3000/W3050 （BJ-W3000/W3050 are not sold domestically in Japan. ）
Color (CAD) 4 HP Designjet 500/800
Color (CAD) 5 HP Designjet 1000
Color (CAD) 6 HP Designjet 4000/4500Printing
This section describes how to execute a print job with the...

2.
Select  Plot from the  File menu. The  Plot dialog box opens.
Check  the Name  setting  under  Printer/plotter  and  confirm  that  iPFxxxx.pc3  (the  name  of  the  printer  you  use)  is
displayed.
Click the  Properties  button. Note
• If 
any  other  printer  name  is  selected,  select  the  name  of  the  printer  that  you  want  to  use  from  the
Name list.
• The names of the printers installed when the HDI driver was installed are in the  Name list.
Windows Software 
> HDI Driver >
Printing...

3.
The Plotter Configuration Editor dialog box opens. Perform the settings that you need for the print job.
Click the  OK button to close the  Plotter Configuration Editor  dialog box. Note
• For more  details  about  how  to  perform  the  settings  in  the  Plotter  Configuration  Editor  dialog  box,
see "Plotter Configuration Editor Dialog Box ." →P.377Windows Software 
> HDI Driver >
iPF825
Printing 4
391
 

4.
The Plot dialog box opens.
Perform the settings that you need on the  Plot dialog box, then click the OK button. Note
• The content  of  the  settings  done  in  the  Plotter  Configuration  Editor  dialog  box  are  reflected  in  the
Paper size settings on the  Plot dialog box.
• For more details about the  Plot dialog box, please refer to the AutoCAD manual.
5. The print job begins. Note
• If 
the  output  exceeds  the  number  of  pixels  prescribed  for  the  media,  in  order  to  prevent...

Status Monitor
The Features of imagePROGRAF Status Monitor .......................................................................................... 393
Job Management Using imagePROGRAF Status Monitor
..............................................................................394The Features of imagePROGRAF Status Monitor
imagePROGRAF Status Monitor is a utility for checking the printer status and managing print jobs.
Two screens are available in imagePROGRAF Status Monitor :  Printer List shows a...

•
If a printer error occurs, you can investigate the corrective action immediately.
• Printer status can be checked in real time on a computer monitor.
• Displays 
the  ink  level  of  every  color  in  the  printer.  An  icon  and  warning  message  will  notify  you  when  ink  levels  are
low.
• The type of paper loaded in each media source is identified. You can also check to see if paper has run out.
• This way, the utility enables you to check printer information and take care of printer...