Canon Imageprograf Ipf825 User Guide

4.
Click  Print Selected Area . Important
• If only one cell is selected,  Print Selected Area cannot be selected.
A message will appear informing you that analysis is in progress. The Layout menu will appear automatically.
Important
• If the range selected in  Excel 2007/2010 is too large, it will not be possible to analyze the data. Select
a smaller range and then run the analysis. Windows Software 
> Print Plug-In for Office >
iPF825
Print Selected Area (Excel) 4
355
 

Note
• If data  analysis  requires  time,  a  message  dialog  will  appear.  If  you  select  No,  you  will  return  to  the
application.
5. Select  Roll Paper Width that is set in the printer.
6. Select image size.
7. Select layout.
8. To configure Binding, click the  Binding Settings button.
Refer to Configuring Binding (Excel) →P.357
 for details on the procedure for configuring  Binding.
9. Select Next. 10.
Select Media Type.
11. Enter Copies. Note
• When Print in Draft mode is selected, printing...

13.
Press Print to start printing. Important
• If divided into plural pages, try reducing the data size or the range you select.
• You cannot run Print or Print Preview  if you select it for a worksheet with no data displayed.Configuring Binding (Excel)
You can configure Binding margins for binding printouts.
1. Configure the settings up to  Layout Selection in the Layout screen in  Print Entire Sheet or Print Selected Area .
Refer 
to Print  Entire  Sheet  (Excel) →P.351
 
and  Print  Selected  Area...

6.
Click the  OK button.
Return to the  Layout screen. Check that the 
Binding settings are applied in the preview screen.
7. Configure the settings in the  Printing Wizard dialog box.Configuring Special Settings
You can configure  Special Settings from the imagePROGRAF Print Plug-In  toolbar.
1. Click  imagePROGRAF in the toolbar, and select  Special Settings.2.
Turn the checkbox for the item you want to change on or off. Item
Details
Show progress indicator during plug-in
startup When this setting is...

Item
Details
Center sheets and print areas This function is only valid in Microsoft Excel.
Ensure image quality when creating page
sizes When this setting is on, documents are created at the maximum size.
This reduces the enlargement ratio during actual printing, which mini-
mizes degradation of the quality of photos, etc.
This function is only valid in [  Microsoft PowerPoint.
Correct the print area when analyzing For data that cannot be processed with usual data analysis, the print
area is corrected...

HDI Driver
The Features of HDI Driver ............................................................................................................................. 360
Operating Environment ................................................................................................................................... 360
Installation Procedure
...................................................................................................................................... 361
Installing with the...

Installation Procedure
There are two ways to install the HDI driver. •Installing with the Canon Installer →P.361
• Installing with the Add-A-Plotter Wizard →P.368
Installing with the Canon Installer
The Canon installer opens and displays as soon as you start the User Software CD-ROM provided with the printer. Follow
the procedure below to perform the installation from this screen.
1. Mount the  User Software CD-ROM in the CD-ROM drive and start the Canon installer. Note
• If the Canon installer screen...

The Installation List appears. Click the 
Install button of the imagePROGRAF HDI Driver .The driver setup screen appears. Click the 
Next button.Windows Software > HDI Driver >
Installing with the Canon Installer
iPF8254
362
 

3.
After you  have  read  the  Licensing  Agreement,  select  I  accept  the  terms  of  the  license  agreement  and  click  the
Next button. 4.
Confirm that the installed AutoCAD is compatible with your computer environment. Click the  OK button. Note
• Confirm that the installed AutoCAD is compatible with your computer environment.
5. The Ready to Install the Program screen opens. Click the  Install button. Windows Software 
> HDI Driver >
iPF825
Installing with the Canon Installer 4
363
 

6.
The HDI driver files are copied to the  Drv folder where the AutoCAD program files are stored.
Click the  Finish button. This completes the setup of the HDI driver. 7.
After AutoCAD starts, select  Plotter Manager from the File menu.
The  Plotters window opens. Click the  Add-A-Plotter Wizard icon.Windows Software 
> HDI Driver >
Installing with the Canon Installer
iPF8254
364