Canon Imageprograf Ipf825 User Guide

8.
The Add Plotter - Introduction Page screen opens. Check the displayed screen and then click the  Nextbutton.Note
• To open  the  Add-A-Plotter  Wizard   you  can  also  click Start  > Control  Panel  >  Autodesk  Plotter
Manager > and then double-click the  Plotter Wizard icon in the Plotters window.
9. Add Plotter - Begin  screen opens. Select My Computer then click the  Next button. Windows Software 
> HDI Driver >
iPF825
Installing with the Canon Installer 4
365
 

10.
The Add Plotter - Plotter Model  screen opens.
Make sure that  Canon Inc. is 
selected in the list of Manufacturers, and for the Models select the name of the print-
er that you want to install then click the  Next button.11.
The Add Plotter - Import Pcp or Pc2  screen opens. Click the Next button. Note
• If 
you want the installer to read plotter information from previously stored PCP or PC2 files, click the
Import File  button.
Windows Software 
> HDI Driver >
Installing with the Canon Installer...

12.
The Add Plotter - Ports screen opens.
Make  sure  that Plot  to  a  port  is  selected,  select  the  port  that  you  want  to  use  for  the  plotter,  then  click  the  Next
button. Note
• In 
the  Add  Plotter  -  Ports  screen,  it  is  recommended  to  select  Network  Port.  If  you  select Local
Port, the AutoCAD warning message may appear when printing.
13. The Add Plotter - Plotter Name screen opens. Click the  Next button.Note
• You 
can change the  Plotter Name setting here, but you will...

14.
The Add Plotter - Finish screen opens. Click the  Finish button.
This completes the installation of the HDI driver. 15.
Clicking  the Finish  button  closes  the  Installation  List  and Setup  Menu   and  ejects  the  User  Software  CD-ROM
from the CD-ROM drive. Installing with the Add-A-Plotter Wizard
Follow the procedure below to use the  Add-A-Plotter Wizard to install the HDI driver without the Canon installer.
1. After AutoCAD starts, select Plotter Manager  from the File menu.
The Plotters...

2.
The Add Plotter - Introduction Page screen opens. Check the displayed screen and then click the  Next button.Note
• To open  the  Add-A-Plotter  Wizard   you  can  also  click Start  > Control  Panel  >  Autodesk  Plotter
Manager > and then click the  Add-A-Plotter Wizard icon in the  Plotters window.
3. The Add Plotter - Begin screen opens. Select  My Computer then click the Next button.4.
The Add Plotter - Plotter Model  screen opens. Mount the User Software CD-ROM in the CD-ROM drive.Windows...

5.
On the Add Plotter - Plotter Model  screen, click the Have Disk button.6.
The  Open  dialog  box  opens.  From  the  Look  in  box,  select  the  CD-ROM  drive,  and  then  browse  to  the  folder  that
holds the hif file.
Select the hif file then click the  Open button. Note
• The hif format file is contained in the following folder.
\HDI Driver\English\2007 (AutoCAD Version 2007)
Windows Software 
> HDI Driver >
Installing with the Add-A-Plotter Wizard
iPF8254
370
 

7.
The display returns to the  Add Plotter - Plotter model  screen.
Select  Canon 
Inc.  from  the  list  of  Manufacturers,  select  the  name  of  the  printer  for  Models,  and  then  click  the
Next button. 8.
The Add Plotter - Import Pcp or Pc2 screen opens. Click the  Next button.Note
• If 
you want the installer to read plotter information from previously stored PCP or PC2 files, click the
Import File  button. Windows Software 
> HDI Driver >
iPF825
Installing with the Add-A-Plotter Wizard 4
371
 

9.
The Add Plotter - Ports screen opens.
Make  sure  that Plot  to  a  port  is  selected,  select  the  port  that  you  want  to  use  for  the  plotter,  then  click  the
Nextbutton. Note
• In 
the  Add  Plotter  -  Ports  screen,  it  is  recommended  to  select  Network  Port.  If  you  select Local
Port, the AutoCAD warning message may appear when printing.
10. The Add Plotter - Plotter Name screen opens. Click the  Nextbutton.Note
• You 
can change the  Plotter Name setting here, but you will...

11.
The Add Plotter - Finish screen opens. Click the  Finish button.
This completes the installation of the HDI driver. 12.
Remove the User Software CD-ROM from the CD-ROM drive. Opening the Plotter Configuration Dialog Box
You can open the  Plotter Configuration Editor  dialog box by two ways.
• Opening from the AutoCAD File Menu →P.374
• Opening from the Start Menu →P.375
Windows Software > HDI Driver >
iPF825
Opening the Plotter Configuration Dialog Box 4
373
 

Opening from the AutoCAD File Menu
Follow the procedure below to open the 
Plotter Configuration Editor dialog box from the AutoCAD  File menu.
1. Select  Plot from the AutoCAD File  menu. The Plot dialog box opens.
Check 
the Name  setting  under  Printer/plotter  and  confirm  that  iPFxxxx.pc3  (the  name  of  the  printer  you  use)  is
displayed.
Click the  Properties  button. Note
• If 
any  other  printer  name  is  selected,  select  the  name  of  the  printer  that  you  want  to  use  from...