Canon Imageformula P 215ii Scan Tini User Guide

							40
[Color adjustment] (Manual settings)
Move the slider to the left or right to adjust the brightness and contrast of 
the image, checking the preview image.
Click the [Grayscale] button to render the image in grayscale.
Click the [Black and White] button to render the image using 2 values: 
black and white.
When adjustment is finished, click the [OK] button. To cancel the 
adjustment, click the [Back] button.
[Image alignment]
Click [Image alignment] to display.
The preview image or the slider can be used for the straightening and the 
trimming.
In the preview image, drag the Move grip  , the Straighten grip   and/or 
the trimming frame directly. To change the extent of the trimmed image, 
drag the Move grip   on the preview.
When adjustment is finished, click the [OK] button. To cancel the 
adjustment, click the [Back] button.
 
						

							41
[Rotate]
Click [Rotate] to display.
The scanned image can be rotated in 90 degrees to the left or the right. 
The rotation can be adjusted according to the preview image.
(5)Information Display Area
The information regarding the Select document and Select output 
is displayed.
Click the   button, and the Output Settings dialog will appear.
Click the [Scan more pages] button to continue the scanning.
Clicking the [Cancel] button will destroy the scanned images and 
return to the top screen.
When clicking the [Finish] button, the output processing will start. 
After it is completed, the screen will return to the top screen.
Select document settings
By default, CaptureOnTouch Lite enables the [Full auto] scan setting, 
so shortcut scans saved to the folder are implemented using the 
scan conditions that match the document.
To specify the document size, color mode, and other settings, set the 
desired scan condition by editing the scan mode panel.
Creating new [Select document] panels
Click the [New document] button, and a [New document] panel will be 
added.
Click   to display the list of panel types. The selected type of the panel is 
created.
Edit [Select document] panel
The [Select document edit screen] opens when you click the [ ] button in 
the [Select document] panel.
Scan settings
Makes the scan settings.
 
						

							42
[Color mode]
Select the color mode for scanning from below.
[Page Size]
Select the paper size of the document to be scanned.
If you specify [Match original size], the page size of the scanned document 
is detected and the images are saved at the detected size.
[Dots per inch]
Select the resolution.
Select [Detect automatically] and the software will automatically scan the 
document at the optimum resolution.
[Scanning Side]
Select the scanning side of the document.
If you select [Skip blank page], scanned images of blank pages are not 
saved.
[Automatically straightens skewed images]
If a document is not straight when fed, the scanner detects that the 
document is not straight from the scanned image and straightens the 
skewed image.
Select the setting from below.
[OFF]  
[Straightens with angle of fed documents]  
[Straightens with angle contents of fed documents]  
[Rotate image to match orientation of text]
Check [Enable] on to rotate the image in the same direction with the 
characters.
[Use advanced settings dialog box]
Document scan settings include basic items that are configured in [Scan 
settings], and the settings that are configured in the advanced settings 
dialog box. The settings in the advanced settings dialog box are applied 
for settings other than the basic items.
Enable [Use advanced settings dialog box] to implement advanced 
scanner settings other than the basic items using the advanced settings 
dialog box (scanner driver). To open the scanner driver, enable this item, 
and then click the [Settings] button.
Which settings are used during scanning differs as follows 
depending on the setting of the [Use advanced settings dialog box] 
check box.
For the advanced settings other than the basic items, see the help in 
the driver settings dialog box.
General
Set the following items as occasion demands.
Detect automatically Automatically determines the color mode based 
on the document content and scans accordingly.
24-bit Color Scans the document in color.
24-bit color 
(photograph)Scans the document in color using photo-
compatible tones.
Grayscale Scans the document in Grayscale.
Grayscale (photograph) Scans the document in color using photo-
compatible tones.
Black and White Scans the document in black and white (binary).
The driver settings dialog box includes setting items that are the 
same as the basic items in [Scanner setting], but the setting for 
each of the them is stored separately.
Setting of [Use advanced 
settings dialog box] Basic items  Other than basic 
items
OFF Settings of 
[Scanner setting]Settings of the 
advanced settings 
dialog box of the 
scanner driver
ON Settings of the advanced settings dialog 
box of the scanner driver
 
						

							43
Name
Enter the name to be displayed in the select document panel.
Icon
You can change the select document icon displayed in the scan mode 
panel.
Enable [Change icon] to enable the [Settings] button and select the file.
The file formats that can be selected as icon files are described below.
 .ico, .exe, .jpg, .png
.icns, .app, .jpg, .png 
Setting the output
By default, CaptureOnTouch Lite enables the settings to converts the 
scanned images to PDF file and save to a folder.
To specify the output method and save location, edit the output panel and 
set the desired output.
Create new [Output] panel
Click the [New output] button to add a [New output] panel.
Click   to display the list of panel types. The selected type of the panel is 
created.
Edit [Output] panel
The Edit output screen opens when you click the [ ] button in the Output 
panel.
Select output method
File formats and save locations that can be selected depend on the output 
method selected.
 
						

							44
Save to folder
Saves the scanned image to the specified folder. When this output method 
is specified, set the save location folder.
Other output methods
CaptureOnTouch Lite supplies output methods other than [Save to folder] 
as plugins.
By installing the plug-in, you can use various services such as printing the 
scanned image or attaching it in an e-mail.
To install plugins, enable the checkbox when installing CaptureOnTouch.
The output methods that can be selected depend on the plugins that have 
been installed.
For how to use the plugins, see the plugin help.
Environmental Settings
In the [Environmental settings] dialog box, you can configure settings 
related to CaptureOnTouch Lite operations and perform scanner 
maintenance.
Maintenance
View the total number of pages scanned with the scanner, and view 
counters for the roller and separation pad. When you replace the roller 
and separation pad, you can reset the counters here.
Initialize
Return all settings to their default condition.
Open the [Environmental settings] dialog box to configure settings related 
to CaptureOnTouch Lite operations.
1Start CaptureOnTouch Lite.
If CaptureOnTouch Lite does not start, double-click [CaptureOnTouch 
Lite Launcher] in the [CaptureOnTouch Lite for Mac] folder.
If you closed the main window after starting CaptureOnTouch Lite, 
open it again from the menu bar.
 
						

							45
2Click [Preferences] in the [CaptureOnTouch Lite] menu.
The [Environmental settings] dialog box appears.
You can configure the following in this dialog box.
[Maintenance]Tab
[Initialize]
Return all settings to their default condition.
 
						

							46
Chapter 7 Scanning with 
CaptureOnTouch
Chapter 7 Scanning with CaptureOnTouchThis section describes the 
scanning procedure when using CaptureOnTouch.
What is CaptureOnTouch? ................................................................. 46
Starting and Exiting CaptureOnTouch.............................................. 47
Screen Descriptions ........................................................................... 49
Standard Scanning ............................................................................. 50
Scanning Shortcut .............................................................................. 52
Scanning with Start Button................................................................ 56
Operations for the scanned image edit window .............................. 56
Select document settings .................................................................. 60
Setting the output ............................................................................... 62
Scanning Shortcut setting ................................................................. 63
About file formats ............................................................................... 64
Environmental Settings ...................................................................... 65
What is CaptureOnTouch?
CaptureOnTouch is a scanning application that enables you to scan 
a document with a simple operation merely by selecting the screen 
panel.
CaptureOnTouch is provided with multiple scanning methods that can be 
selected according to the purpose and application.
 
						

							47
Turn OFF the Auto Start switch on the rear of the scanner, and use the 
supplied USB cable to connect the scanner to the computer. For details, 
see Connecting the Scanner to the Computer24.
CaptureOnTouch supports the following scanning methods.
Standard Scanning
Click the Select document and Output panels, and then click the [Scan] 
button to scan the document. You can select the scan method according 
to the document type and purpose of use before scanning.
-> Standard Scanning
Scanning Shortcut
You can register in advance combinations of frequently-used document 
selections and output methods as a Scanning Shortcut. Just click the 
Scanning shortcut panel to implement the scan.
-> Scanning Shortcut
Start button
Scanning shortcuts are allocated to the scanner start button in advance. 
Set the document and press the Start button to start the scan. You can 
also allocate your own shortcuts to the start button.
-> Scanning with Start Button
Starting and Exiting CaptureOnTouch
By default, CaptureOnTouch becomes resident in the system when 
you start your computer.
Double-click   (CaptureOnTouch icon) in the taskbar to start 
CaptureOnTouch and display the main window.
You can also start CaptureOnTouch from the Start menu. Click 
[Start] - [All Programs] - [Canon P-xxx] - [P-xxx 
CaptureOnTouch].
The interval between the time you press the Start button on the 
scanner and the time scanning begins is shortened when the 
[Make CaptureOnTouch resident] check box is selected in the 
[Basic settings] tab of the [Environmental settings] dialog box. 
For details, see Environmental Settings65.
Click 
 (CaptureOnTouch icon) in the menu bar and then click [Launch 
CaptureOnTouch] from the menu which appears to start CaptureOnTouch 
and display the main window.
 
						

							48
The interval between the time you press the Start button on the 
scanner and the time scanning begins is shortened when the 
[Make CaptureOnTouch resident] check box is selected in the 
[Basic settings] tab of the [Environmental settings] dialog box. 
For details, see Environmental Settings65.
Exiting CaptureOnTouch
To close the CaptureOnTouch window, click   at the top of the window. 
This closes the window, but CaptureOnTouch will continue to reside in the 
system.
To quit the CaptureOnTouch application, click   (CaptureOnTouch icon) 
in the taskbar, and select [Exit] from the menu.
CaptureOnTouch becomes no longer resident in the system and the icon 
disappears from the taskbar.
To close the CaptureOnTouch window, click  at the top of the window. 
This closes the window, but CaptureOnTouch will continue to reside in the 
system.
click 
 (CaptureOnTouch icon) in the menu bar, and select [Exit] from the 
menu.
Restarting CaptureOnTouch
To use CaptureOnTouch after it has been made not resident in the system, 
use one of the following procedures to restart it. CaptureOnTouch will start 
and become resident in the system again.
Click [Start] - [All Programs] - [Canon P-xxxx] - [P-xxxx 
CaptureOnTouch].
Press the Start button on the scanner (in this case, the main screen 
of CaptureOnTouch will open and scanning will start using the scan 
method assigned to the Start button).
 
						

							49
In Windows 8.1 / 8, it is registered in the following location.
Open [GO] - [Applications] folder from the Finder, and double-click 
[CaptureOnTouch P-xxx].
Press the Start button on the scanner (in this case, the main screen 
of CaptureOnTouch will open and scanning will start using the scan 
method assigned to the Start button).
If you are using OS X 10.9, CaptureOnTouch will not start when the 
[Start] button is pressed.
Open [GO] - [Applications] folder from the Finder, and double-click 
[CaptureOnTouch P-xxx].
Screen Descriptions
There are two areas in the CaptureOnTouch main screen, [Scanning 
Shortcut] and [Standard Scanning].
Use the [>] [